Hi, This series adds .dts files for Synology DS213j (armada 370 2-bay NAS) and DS414 (armada XP 4-bay NAS) devices. It is based on comments received on a v0 submission of DS213j .dts file [1]. Andrew, in this v1, the two .dts files are still separate w/o any common .dtsi. I took a quick look it seems there are small differences between the two which make me wonder if its worth the trouble: - DS414 fans are not handled by the SoC - various pinctrl variations - a tiny difference in SPI flash partitioning - phy-mode for ethernet interfaces - different comments associated w/ same nodes (e.g. uart1) - etc Could you take a quick look and tell me if you think it's worth it? I'll follow what you'll decide. Cheers, a+ [1]: http://thread.gmane.org/gmane.linux.drivers.devicetree/95401 Changes since v0: - Added a comment at the beginning of DS213j and DS414j .dts file regarding the need for a recent Marvell bootloader. Arnd suggested to do a specific .dtb file for new and old bootloaders but I think if we follow this path for DS414 and DS213j, we will probably have to do it for all Armada-based synology NAS and possibly for other Armada 370/XP based devices. Opting for recent bootloaders config and having a comment is easier. It is likely that a user already has a recent bootloader. Otherwise, upgrade is a one click process anyway. If a user thinks it is easier to have two different .dts files in the kernel, she will still be able to push a patch. - Added a comment in the .dts file about the bootloader screwing the kernel if the environment is saved. - Kept GPL licence for .dts file - Fixed bad naming of node and alias (_ vs -) - Added micron vendor prefix for n25q064 flash - Disabled SoC RTC; a Seiko S-35390A is used as main RTC - Added comments about the purpose of each serial port - Added stdout-path = &uart0; to help barebox. A specific patch is included in the series to provide labels for uart serial nodes - Added patch for DS414 .dts file Arnaud Ebalard (3): arm: mvebu: add uartX labels for Armada SoC serial nodes arm: mvebu: add .dts file for Synology DS213j arm: mvebu: add .dts file for Synology DS414 arch/arm/boot/dts/Makefile | 6 +- arch/arm/boot/dts/armada-370-synology-ds213j.dts | 351 +++++++++++++++++++++++ arch/arm/boot/dts/armada-370-xp.dtsi | 5 +- arch/arm/boot/dts/armada-xp-synology-ds414.dts | 343 ++++++++++++++++++++++ arch/arm/boot/dts/armada-xp.dtsi | 5 +- 5 files changed, 704 insertions(+), 6 deletions(-) create mode 100644 arch/arm/boot/dts/armada-370-synology-ds213j.dts create mode 100644 arch/arm/boot/dts/armada-xp-synology-ds414.dts -- 2.1.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
