Move drm/bridge documentation to video/bridge.
Also, add proper documentation for gpios used by ptn3460.
Signed-off-by: Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>
---
.../devicetree/bindings/drm/bridge/ptn3460.txt | 39 --------------------
.../devicetree/bindings/video/bridge/ptn3460.txt | 39 ++++++++++++++++++++
2 files changed, 39 insertions(+), 39 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/drm/bridge/ptn3460.txt
create mode 100644 Documentation/devicetree/bindings/video/bridge/ptn3460.txt
diff --git a/Documentation/devicetree/bindings/drm/bridge/ptn3460.txt b/Documentation/devicetree/bindings/drm/bridge/ptn3460.txt
deleted file mode 100644
index 663fe6c..0000000
--- a/Documentation/devicetree/bindings/drm/bridge/ptn3460.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-ptn3460 bridge bindings
-
-Required properties:
- - compatible: "nxp,ptn3460"
- - reg: i2c address of the bridge
- - powerdown-gpio: OF device-tree gpio specification
- - reset-gpio: OF device-tree gpio specification
- - edid-emulation: The EDID emulation entry to use
- +-------+------------+------------------+
- | Value | Resolution | Description |
- | 0 | 1024x768 | NXP Generic |
- | 1 | 1920x1080 | NXP Generic |
- | 2 | 1920x1080 | NXP Generic |
- | 3 | 1600x900 | Samsung LTM200KT |
- | 4 | 1920x1080 | Samsung LTM230HT |
- | 5 | 1366x768 | NXP Generic |
- | 6 | 1600x900 | ChiMei M215HGE |
- +-------+------------+------------------+
-
- - video interfaces: Device node can contain video interface port
- nodes for panel according to [1].
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
- lvds-bridge@20 {
- compatible = "nxp,ptn3460";
- reg = <0x20>;
- powerdown-gpio = <&gpy2 5 1 0 0>;
- reset-gpio = <&gpx1 5 1 0 0>;
- edid-emulation = <5>;
- ports {
- port@0 {
- bridge_out: endpoint {
- remote-endpoint = <&panel_in>;
- };
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/video/bridge/ptn3460.txt b/Documentation/devicetree/bindings/video/bridge/ptn3460.txt
new file mode 100644
index 0000000..361971b
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/bridge/ptn3460.txt
@@ -0,0 +1,39 @@
+ptn3460 bridge bindings
+
+Required properties:
+ - compatible: "nxp,ptn3460"
+ - reg: i2c address of the bridge
+ - powerdown-gpio: OF device-tree gpio specification for PD_N pin.
+ - reset-gpio: OF device-tree gpio specification for RST_N pin.
+ - edid-emulation: The EDID emulation entry to use
+ +-------+------------+------------------+
+ | Value | Resolution | Description |
+ | 0 | 1024x768 | NXP Generic |
+ | 1 | 1920x1080 | NXP Generic |
+ | 2 | 1920x1080 | NXP Generic |
+ | 3 | 1600x900 | Samsung LTM200KT |
+ | 4 | 1920x1080 | Samsung LTM230HT |
+ | 5 | 1366x768 | NXP Generic |
+ | 6 | 1600x900 | ChiMei M215HGE |
+ +-------+------------+------------------+
+
+ - video interfaces: Device node can contain video interface port
+ nodes for panel according to [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+ lvds-bridge@20 {
+ compatible = "nxp,ptn3460";
+ reg = <0x20>;
+ powerdown-gpio = <&gpy2 5 1 0 0>;
+ reset-gpio = <&gpx1 5 1 0 0>;
+ edid-emulation = <5>;
+ ports {
+ port@0 {
+ bridge_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
