On Wed, 01 Feb 2023, Okan Sahin wrote:
> MFD driver for MAX77541/MAX77540 to enable its sub
> devices.
>
> The MAX77541 is a multi-function devices. It includes
> buck converter and ADC.
>
> The MAX77540 is a high-efficiency buck converter
> with two 3A switching phases.
>
> They have same regmap except for ADC part of MAX77541.
>
> Signed-off-by: Okan Sahin <okan.sahin@xxxxxxxxxx>
> ---
> drivers/mfd/Kconfig | 13 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/max77541.c | 244 +++++++++++++++++++++++++++++++++++
> include/linux/mfd/max77541.h | 108 ++++++++++++++++
> 4 files changed, 366 insertions(+)
> create mode 100644 drivers/mfd/max77541.c
> create mode 100644 include/linux/mfd/max77541.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 8b93856de432..e6bf621cbc8e 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -791,6 +791,19 @@ config MFD_MAX14577
> additional drivers must be enabled in order to use the functionality
> of the device.
>
> +config MFD_MAX77541
> + tristate "Analog Devices MAX77541/77540 PMIC Support"
> + depends on I2C=y
> + select MFD_CORE
> + select REGMAP_I2C
> + select REGMAP_IRQ
> + help
> + Say yes here to add support for Analog Devices
60-chars is not a good choice for line wrap. 80 would be better.
> + MAX77541 and MAX77540 Power Management ICs.This
> + driver provides common support for accessing the
> + device;additional drivers must be enabled in order
> + to use the functionality of the device.
Spaces after '.' and ';'.
Please mention the device functionality i.e. the children.
> +
> config MFD_MAX77620
> bool "Maxim Semiconductor MAX77620 and MAX20024 PMIC Support"
> depends on I2C=y
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 7ed3ef4a698c..bf21228f5742 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -161,6 +161,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
> obj-$(CONFIG_MFD_DA9150) += da9150-core.o
>
> obj-$(CONFIG_MFD_MAX14577) += max14577.o
> +obj-$(CONFIG_MFD_MAX77541) += max77541.o
> obj-$(CONFIG_MFD_MAX77620) += max77620.o
> obj-$(CONFIG_MFD_MAX77650) += max77650.o
> obj-$(CONFIG_MFD_MAX77686) += max77686.o
> diff --git a/drivers/mfd/max77541.c b/drivers/mfd/max77541.c
> new file mode 100644
> index 000000000000..f4d8f9e40ada
> --- /dev/null
> +++ b/drivers/mfd/max77541.c
> @@ -0,0 +1,244 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (c) 2022 Analog Devices, Inc.
> + * Driver for the MAX77540 and MAX77541
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/core.h>
> +#include <linux/of_device.h>
> +#include <linux/mfd/max77541.h>
> +#include <linux/regmap.h>
Alphabetical.
> +static const struct regmap_config max77541_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> +};
> +
> +static const struct regmap_irq max77541_src_irqs[] = {
> + MAX77541_REGMAP_IRQ_REG(MAX77541_BIT_INT_SRC_TOPSYS),
> + MAX77541_REGMAP_IRQ_REG(MAX77541_BIT_INT_SRC_BUCK),
> +};
> +
> +static const struct regmap_irq_chip max77541_src_irq_chip = {
> + .name = "max77541-src",
> + .status_base = MAX77541_REG_INT_SRC,
> + .mask_base = MAX77541_REG_INT_SRC,
MAX77541_REG_INT_SRC_M?
> + .num_regs = 1,
> + .irqs = max77541_src_irqs,
> + .num_irqs = ARRAY_SIZE(max77541_src_irqs),
> +};
> +
> +static const struct regmap_irq max77541_topsys_irqs[] = {
> + MAX77541_REGMAP_IRQ_REG(MAX77541_BIT_TOPSYS_INT_TJ_120C),
> + MAX77541_REGMAP_IRQ_REG(MAX77541_BIT_TOPSYS_INT_TJ_140C),
> + MAX77541_REGMAP_IRQ_REG(MAX77541_BIT_TOPSYS_INT_TSHDN),
> + MAX77541_REGMAP_IRQ_REG(MAX77541_BIT_TOPSYS_INT_UVLO),
> + MAX77541_REGMAP_IRQ_REG(MAX77541_BIT_TOPSYS_INT_ALT_SWO),
> + MAX77541_REGMAP_IRQ_REG(MAX77541_BIT_TOPSYS_INT_EXT_FREQ_DET),
> +};
> +
> +static const struct regmap_irq_chip max77541_topsys_irq_chip = {
> + .name = "max77541-topsys",
> + .status_base = MAX77541_REG_TOPSYS_INT,
> + .mask_base = MAX77541_REG_TOPSYS_INT_M,
> + .num_regs = 1,
> + .irqs = max77541_topsys_irqs,
> + .num_irqs = ARRAY_SIZE(max77541_topsys_irqs),
> +};
> +
> +static const struct regmap_irq max77541_buck_irqs[] = {
> + MAX77541_REGMAP_IRQ_REG(MAX77541_BIT_BUCK_INT_M1_POK_FLT),
> + MAX77541_REGMAP_IRQ_REG(MAX77541_BIT_BUCK_INT_M2_POK_FLT),
> + MAX77541_REGMAP_IRQ_REG(MAX77541_BIT_BUCK_INT_M1_SCFLT),
> + MAX77541_REGMAP_IRQ_REG(MAX77541_BIT_BUCK_INT_M2_SCFLT),
> +};
> +
> +static const struct regmap_irq_chip max77541_buck_irq_chip = {
> + .name = "max77541-buck",
> + .status_base = MAX77541_REG_BUCK_INT,
> + .mask_base = MAX77541_REG_BUCK_INT_M,
> + .num_regs = 1,
> + .irqs = max77541_buck_irqs,
> + .num_irqs = ARRAY_SIZE(max77541_buck_irqs),
> +};
> +
> +static const struct regmap_irq max77541_adc_irqs[] = {
> + MAX77541_REGMAP_IRQ_REG(MAX77541_BIT_ADC_INT_CH1_I),
> + MAX77541_REGMAP_IRQ_REG(MAX77541_BIT_ADC_INT_CH2_I),
> + MAX77541_REGMAP_IRQ_REG(MAX77541_BIT_ADC_INT_CH3_I),
> + MAX77541_REGMAP_IRQ_REG(MAX77541_BIT_ADC_INT_CH6_I),
> +};
> +
> +static const struct regmap_irq_chip max77541_adc_irq_chip = {
> + .name = "max77541-adc",
> + .status_base = MAX77541_REG_ADC_INT,
> + .mask_base = MAX77541_REG_ADC_MSK,
> + .num_regs = 1,
> + .irqs = max77541_adc_irqs,
> + .num_irqs = ARRAY_SIZE(max77541_adc_irqs),
> +};
> +
> +static const struct mfd_cell max77540_devs[] = {
> + MFD_CELL_OF("max77540-regulator", NULL, NULL, 0, 0,
> + "adi,max77540-regulator"),
No line-wrap required here.
Please use 100-chars throughout the C file.
> +};
> +
> +static const struct mfd_cell max77541_devs[] = {
> + MFD_CELL_OF("max77541-regulator", NULL, NULL, 0, 0,
> + "adi,max77541-regulator"),
> + MFD_CELL_OF("max77541-adc", NULL, NULL, 0, 0,
> + NULL),
> +};
> +
> +static const struct chip_info chip[] = {
Why do you need this require sub-structure?
> + [MAX77540] = {
> + .id = MAX77540,
> + .n_devs = ARRAY_SIZE(max77540_devs),
> + .devs = max77540_devs,
> + },
> + [MAX77541] = {
> + .id = MAX77541,
> + .n_devs = ARRAY_SIZE(max77541_devs),
> + .devs = max77541_devs,
> + },
> +};
> +
> +static int max77541_pmic_irq_init(struct device *dev)
> +{
> + struct max77541 *max77541 = dev_get_drvdata(dev);
> + int irq = max77541->i2c->irq;
> + int ret;
> +
> + ret = devm_regmap_add_irq_chip(dev, max77541->regmap, irq,
> + IRQF_ONESHOT | IRQF_SHARED, 0,
> + &max77541_src_irq_chip,
> + &max77541->irq_data);
> + if (ret)
> + return ret;
> +
> + ret = devm_regmap_add_irq_chip(dev, max77541->regmap, irq,
> + IRQF_ONESHOT | IRQF_SHARED, 0,
> + &max77541_topsys_irq_chip,
> + &max77541->irq_topsys);
> + if (ret)
> + return ret;
> +
> + ret = devm_regmap_add_irq_chip(dev, max77541->regmap, irq,
> + IRQF_ONESHOT | IRQF_SHARED, 0,
> + &max77541_buck_irq_chip,
> + &max77541->irq_buck);
> + if (ret)
> + return ret;
> +
> + if (max77541->chip->id == MAX77541) {
> + ret = devm_regmap_add_irq_chip(dev, max77541->regmap, irq,
> + IRQF_ONESHOT | IRQF_SHARED, 0,
> + &max77541_adc_irq_chip,
> + &max77541->irq_adc);
> + if (ret)
> + return ret;
> + }
> +
> + return ret;
> +}
> +
> +static int max77541_pmic_setup(struct device *dev)
> +{
> + struct max77541 *max77541 = dev_get_drvdata(dev);
> + unsigned int val;
> + int ret;
> +
> + ret = max77541_pmic_irq_init(dev);
> + if (ret)
> + return dev_err_probe(dev, ret, "Failed to initialize IRQ\n");
> +
> + ret = regmap_read(max77541->regmap, MAX77541_REG_INT_SRC, &val);
> + if (ret)
> + return ret;
What are you doing with 'val' before over-writing it in the next line?
> + ret = regmap_read(max77541->regmap, MAX77541_REG_TOPSYS_INT, &val);
> + if (ret)
> + return ret;
> +
> + ret = regmap_read(max77541->regmap, MAX77541_REG_BUCK_INT, &val);
> + if (ret)
> + return ret;
> +
> + ret = device_init_wakeup(dev, true);
> + if (ret)
> + return dev_err_probe(dev, ret, "Unable to init wakeup\n");
> +
> + return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
> + max77541->chip->devs,
> + max77541->chip->n_devs,
> + NULL, 0, NULL);
We usually place these at the bottom of .probe()
> +}
> +
> +static const struct i2c_device_id max77541_i2c_id[];
> +
> +static int max77541_i2c_probe(struct i2c_client *client)
> +{
> + struct device *dev = &client->dev;
> + struct max77541 *max77541;
> +
> + max77541 = devm_kzalloc(&client->dev, sizeof(*max77541), GFP_KERNEL);
"dev"
> + if (!max77541)
> + return -ENOMEM;
> +
> + i2c_set_clientdata(client, max77541);
> + max77541->i2c = client;
> +
> + if (dev->of_node)
> + max77541->chip = of_device_get_match_data(dev);
> + else
> + max77541->chip = (struct chip_info *)
> + i2c_match_id(max77541_i2c_id,
> + client)->driver_data;
> + if (!max77541->chip)
> + return -EINVAL;
> +
> + max77541->regmap = devm_regmap_init_i2c(client,
> + &max77541_regmap_config);
> + if (IS_ERR(max77541->regmap))
> + return dev_err_probe(dev, PTR_ERR(max77541->regmap),
> + "Failed to allocate register map\n");
> +
> + return max77541_pmic_setup(dev);
> +}
> +
> +static const struct of_device_id max77541_of_id[] = {
> + {
> + .compatible = "adi,max77540",
> + .data = &chip[MAX77540],
> + },
> + {
> + .compatible = "adi,max77541",
> + .data = &chip[MAX77541],
> + },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, max77541_of_id);
> +
> +static const struct i2c_device_id max77541_i2c_id[] = {
> + { "max77540", (kernel_ulong_t)&chip[MAX77540] },
> + { "max77541", (kernel_ulong_t)&chip[MAX77541] },
Just 'MAX77540' is fine.
> + { /* sentinel */ }
Remove the comment, we know how terminators work.
Same comments for max77541_of_id.
> +};
> +MODULE_DEVICE_TABLE(i2c, max77541_i2c_id);
> +
> +static struct i2c_driver max77541_i2c_driver = {
> + .driver = {
> + .name = "max77541",
> + .of_match_table = max77541_of_id,
> + },
> + .probe_new = max77541_i2c_probe,
> + .id_table = max77541_i2c_id,
The "i2c" parts here are superfluous.
> +};
> +module_i2c_driver(max77541_i2c_driver);
> +
> +MODULE_DESCRIPTION("MAX7740/MAX7741 MFD Driver");
Drop all mention of MFD from the code.
> +MODULE_AUTHOR("Okan Sahin <okan.sahin@xxxxxxxxxx>");
> +MODULE_LICENSE("GPL");
> +MODULE_VERSION("1.0");
> diff --git a/include/linux/mfd/max77541.h b/include/linux/mfd/max77541.h
> new file mode 100644
> index 000000000000..986f0f71c196
> --- /dev/null
> +++ b/include/linux/mfd/max77541.h
> @@ -0,0 +1,108 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +
> +#ifndef __MAX77541_MFD_H__
> +#define __MAX77541_MFD_H__
__MFD_<DEVICE>__
> +#include <linux/bits.h>
> +#include <linux/types.h>
> +
> +/* REGISTERS */
> +
> +/* GLOBAL CONFIG1 */
> +#define MAX77541_REG_INT_SRC 0x00
> +#define MAX77541_REG_INT_SRC_M 0x01
> +#define MAX77541_REG_TOPSYS_INT 0x02
> +#define MAX77541_REG_TOPSYS_INT_M 0x03
> +
> +#define MAX77541_REG_EN_CTRL 0x0B
> +
> +/* BUCK CONFIG */
> +#define MAX77541_REG_BUCK_INT 0x20
> +#define MAX77541_REG_BUCK_INT_M 0x21
> +
> +#define MAX77541_REG_M1_VOUT 0x23
> +#define MAX77541_REG_M1_CFG1 0x25
> +
> +#define MAX77541_REG_M2_VOUT 0x33
> +#define MAX77541_REG_M2_CFG1 0x35
> +
> +/* INTERRUPT MASKS*/
Inconsistent.
> +#define MAX77541_REG_INT_SRC_MASK 0x00
> +#define MAX77541_REG_TOPSYS_INT_MASK 0x00
> +#define MAX77541_REG_BUCK_INT_MASK 0x00
> +
> +/*BITS OF REGISTERS*/
Spaces.
> +#define MAX77541_BIT_INT_SRC_TOPSYS BIT(0)
> +#define MAX77541_BIT_INT_SRC_BUCK BIT(1)
> +
> +#define MAX77541_BIT_TOPSYS_INT_TJ_120C BIT(0)
> +#define MAX77541_BIT_TOPSYS_INT_TJ_140C BIT(1)
> +#define MAX77541_BIT_TOPSYS_INT_TSHDN BIT(2)
> +#define MAX77541_BIT_TOPSYS_INT_UVLO BIT(3)
> +#define MAX77541_BIT_TOPSYS_INT_ALT_SWO BIT(4)
> +#define MAX77541_BIT_TOPSYS_INT_EXT_FREQ_DET BIT(5)
It's nice when these are listed under the their registers, like:
#define MAX77541_REG_TOPSYS_INT 0x02
#define MAX77541_REG_TOPSYS_INT_M 0x03
#define MAX77541_BIT_TOPSYS_INT_TJ_120C BIT(0)
#define MAX77541_BIT_TOPSYS_INT_TJ_140C BIT(1)
#define MAX77541_BIT_TOPSYS_INT_TSHDN BIT(2)
#define MAX77541_BIT_TOPSYS_INT_UVLO BIT(3)
#define MAX77541_BIT_TOPSYS_INT_ALT_SWO BIT(4)
#define MAX77541_BIT_TOPSYS_INT_EXT_FREQ_DET BIT(5)
> +#define MAX77541_BIT_BUCK_INT_M1_POK_FLT BIT(0)
> +#define MAX77541_BIT_BUCK_INT_M2_POK_FLT BIT(1)
> +#define MAX77541_BIT_BUCK_INT_M1_SCFLT BIT(4)
> +#define MAX77541_BIT_BUCK_INT_M2_SCFLT BIT(5)
> +
> +#define MAX77541_BIT_M1_EN BIT(0)
> +#define MAX77541_BIT_M2_EN BIT(1)
> +
> +#define MAX77541_BITS_MX_VOUT GENMASK(7, 0)
> +#define MAX77541_BITS_MX_CFG1_RNG GENMASK(7, 6)
> +
> +/* ADC */
Just one space each side is fine.
> +#define MAX77541_REG_ADC_INT 0x70
> +#define MAX77541_REG_ADC_MSK 0x71
> +
> +#define MAX77541_REG_ADC_DATA_CH1 0x72
> +#define MAX77541_REG_ADC_DATA_CH2 0x73
> +#define MAX77541_REG_ADC_DATA_CH3 0x74
> +#define MAX77541_REG_ADC_DATA_CH6 0x77
> +
> +#define MAX77541_BIT_ADC_INT_CH1_I BIT(0)
> +#define MAX77541_BIT_ADC_INT_CH2_I BIT(1)
> +#define MAX77541_BIT_ADC_INT_CH3_I BIT(2)
> +#define MAX77541_BIT_ADC_INT_CH6_I BIT(5)
> +
> +#define MAX77541_MAX_REGULATORS 2
> +
> +#define MAX77541_REGMAP_IRQ_REG(_mask) \
> + { .mask = (_mask) }
Same line.
Although, I'm not sure this adds to anything in the code.
Use REGMAP_IRQ_REG() or just the .mask line in place.
> +enum max7754x_ids {
> + MAX77540,
> + MAX77541,
> +};
> +
> +enum max77541_regulators {
> + MAX77541_BUCK1 = 1,
> + MAX77541_BUCK2,
> +};
> +
> +struct chip_info {
> + enum max7754x_ids id;
> + int n_devs;
> + const struct mfd_cell *devs;
> +};
> +
> +struct regmap;
> +struct regmap_irq_chip_data;
> +struct i2c_client;
> +
> +struct max77541 {
> + enum max7754x_ids id;
Why do you need this at all?
You definitely don't need it twice.
> + const struct chip_info *chip;
> +
> + struct regmap_irq_chip_data *irq_data;
> + struct regmap_irq_chip_data *irq_buck;
> + struct regmap_irq_chip_data *irq_topsys;
> + struct regmap_irq_chip_data *irq_adc;
> +
> + struct i2c_client *i2c;
> + struct regmap *regmap;
These are the important ones. Please place them at the top.
> +};
> +
> +#endif /* __MAX77541_MFD_H__ */
> --
> 2.30.2
>
--
Lee Jones [李琼斯]
