Re: [PATCH v6 1/2] dt-bindings: i2c: aspeed: support for AST2600-i2cv2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/03/2023 11:16, Ryan Chen wrote:
>>>>>>> aspeed,timout properites:
>>>>>>> For example I2C controller as slave mode, and suddenly
>> disconnected.
>>>>>>> Slave state machine will keep waiting for master clock in for
>>>>>>> rx/tx
>>>> transmit.
>>>>>>> So it need timeout setting to enable timeout unlock controller state.
>>>>>>> And in another side. In Master side also need avoid suddenly slave
>>>>>> miss(un-plug), Master will timeout and release the SDA/SCL.
>>>>>>>
>>>>>>> Do you mean add those description into ore aspeed,timout
>>>>>>> properites
>>>>>> description?
>>>>>>
>>>>>> You are describing here one particular feature you want to enable
>>>>>> in the driver which looks non-scalable and more difficult to
>> configure/use.
>>>>>> What I was looking for is to describe the actual configuration you have
>> (e.g.
>>>>>> multi-master) which leads to enable or disable such feature in your
>>>> hardware.
>>>>>> Especially that bool value does not scale later to actual timeout
>>>>>> values in time (ms)...
>>>>>>
>>>>>> I don't know I2C that much, but I wonder - why this should be
>>>>>> specific to Aspeed I2C and no other I2C controllers implement it?
>>>>>> IOW, this looks quite generic and every I2C controller should have
>>>>>> it. Adding it specific to Aspeed suggests that either we miss a
>>>>>> generic property or this should not be in DT at all (because no one
>>>>>> else has
>>>> it...).
>>>>>>
>>>>>> Also I wonder, why you wouldn't enable timeout always...
>>>>>>
>>>>>> +Cc Wolfram,
>>>>>> Maybe you know whether bool "timeout" property for one controller
>>>>>> makes sense? Why we do not have it for all controllers?
>>>>>>
>>>>> Because, i2c bus didn’t specific timeout.
>>>>> But SMBus defines a clock low time-out, TIMEOUT of 35 ms.
>>>>>
>>>>> It have definition in SMBus specification.
>>>>> http://smbus.org/specs/SMBus_3_1_20180319.pdf
>>>>> You can check Page 18, Note3 that have timeout description.
>>>>
>>>> Then you have already property for this - "smbus"?
>>> To be a property "smbus", that would be a big topic, I saw fsl i2c
>>> also have this.
>>> https://github.com/torvalds/linux/blob/master/Documentation/devicetree
>>> /bindings/i2c/i2c-mpc.yaml#L43-L47
>>> So, I just think the "timeout" property.
>>
>> Yeah and this is the only place. It also differs because it allows actual
>> timeout values.
> Thanks, So can I still keep the property "aspeed,timeout" here?
> It is the only place. 

No, because none of my concerns above are addressed.

Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux