Enable SAI3 on i.MX8MP EVK, add WM8960 codec binding and regulator.
This is all that is needed to get analog audio output operational
on i.MX8MP EVK.
Acked-by: Peng Fan <peng.fan@xxxxxxx>
Reviewed-by: Fabio Estevam <festevam@xxxxxxxxx>
Reviewed-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
Signed-off-by: Marek Vasut <marex@xxxxxxx>
---
Cc: Abel Vesa <abelvesa@xxxxxxxxxx>
Cc: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
Cc: Fabio Estevam <festevam@xxxxxxxxx>
Cc: Jacky Bai <ping.bai@xxxxxxx>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>
Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Cc: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
Cc: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>
Cc: NXP Linux Team <linux-imx@xxxxxxx>
Cc: Peng Fan <peng.fan@xxxxxxx>
Cc: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>
Cc: Richard Cochran <richardcochran@xxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
Cc: Stephen Boyd <sboyd@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-clk@xxxxxxxxxxxxxxx
---
V2: No change
V3: No change
V4: - Update codec node name and phandle label
- Use just sound for the sound node name
- Rebase on next 20230223
V5: - Drop regulator-always-on from codec regulator
- Add RB from Fabio
- TB by Alexander added and removed again, since the patch was reworked
- Switch to simple-audio-card
- Add sound-dai-cells to codec node
V6: - Split off separate pinctrl for regulator
- Drop unused SAI3_RXFS pinmux
V7: - Add AB from Peng
- Add RB from Marco
---
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 80 ++++++++++++++++++++
1 file changed, 80 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 7816853162b3f..fa37ce89f8d3d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -40,6 +40,17 @@ pcie0_refclk: pcie0-refclk {
clock-frequency = <100000000>;
};
+ reg_audio_pwr: regulator-audio-pwr {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audio_pwr_reg>;
+ regulator-name = "audio-pwr";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_can1_stby: regulator-can1-stby {
compatible = "regulator-fixed";
regulator-name = "can1-stby";
@@ -83,6 +94,37 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "wm8960-audio";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&cpudai>;
+ simple-audio-card,bitclock-master = <&cpudai>;
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Speaker", "External Speaker",
+ "Microphone", "Mic Jack";
+ simple-audio-card,routing =
+ "Headphone Jack", "HP_L",
+ "Headphone Jack", "HP_R",
+ "External Speaker", "SPK_LP",
+ "External Speaker", "SPK_LN",
+ "External Speaker", "SPK_RP",
+ "External Speaker", "SPK_RN",
+ "LINPUT1", "Mic Jack",
+ "LINPUT3", "Mic Jack",
+ "Mic Jack", "MICB";
+
+ cpudai: simple-audio-card,cpu {
+ sound-dai = <&sai3>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&wm8960>;
+ };
+
+ };
};
&flexspi {
@@ -344,6 +386,18 @@ &i2c3 {
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
+ wm8960: codec@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ #sound-dai-cells = <0>;
+ clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+ clock-names = "mclk";
+ wlf,shared-lrclk;
+ wlf,hp-cfg = <3 2 3>;
+ wlf,gpio-cfg = <1 3>;
+ SPKVDD1-supply = <®_audio_pwr>;
+ };
+
pca6416: gpio@20 {
compatible = "ti,tca6416";
reg = <0x20>;
@@ -422,6 +476,16 @@ &pwm4 {
status = "okay";
};
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+ assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <12288000>;
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -499,6 +563,12 @@ &wdog1 {
};
&iomuxc {
+ pinctrl_audio_pwr_reg: audiopwrreggrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0xd6
+ >;
+ };
+
pinctrl_eqos: eqosgrp {
fsl,pins = <
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2
@@ -668,6 +738,16 @@ MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS 0x140
>;
};
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0xd6
+ MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0xd6
+ MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0xd6
+ MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0xd6
+ MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0xd6
+ >;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140
--
2.39.2
