RZ/G2L General PWM Timer (GPT) composed of 8 channels with 32-bit timer (GPT32E). It supports the following functions * 32 bits × 8 channels * Up-counting or down-counting (saw waves) or up/down-counting (triangle waves) for each counter. * Clock sources independently selectable for each channel * Two I/O pins per channel * Two output compare/input capture registers per channel * For the two output compare/input capture registers of each channel, four registers are provided as buffer registers and are capable of operating as comparison registers when buffering is not in use. * In output compare operation, buffer switching can be at crests or troughs, enabling the generation of laterally asymmetric PWM waveforms. * Registers for setting up frame cycles in each channel (with capability for generating interrupts at overflow or underflow) * Generation of dead times in PWM operation * Synchronous starting, stopping and clearing counters for arbitrary channels * Starting, stopping, clearing and up/down counters in response to input level comparison * Starting, clearing, stopping and up/down counters in response to a maximum of four external triggers * Output pin disable function by dead time error and detected short-circuits between output pins * A/D converter start triggers can be generated (GPT32E0 to GPT32E3) * Enables the noise filter for input capture and external trigger operation This patch series aims to add basic pwm support for RZ/G2L GPT driver by creating separate logical channels for each IOs. v13->v14: * Moved the patch from series[1] to here. [1] https://lore.kernel.org/linux-renesas-soc/20221215205843.4074504-1-biju.das.jz@xxxxxxxxxxxxxx/T/#t * Add Rb tag from Rob for patch#2 * Removed parenthesis for RZG2L_MAX_HW_CHANNELS and RZG2L_CHANNELS_PER_IO * Removed duty_cycle variable from struct rzg2l_gpt_chip and added comment for cache for prescale variable. * Fixed a bug in rzg2l_gpt_cntr_need_stop(). * Reordered rzg2l_gpt_config() just above apply() * Replaced pwm_is_enabled()->pwm->state.enabled in config * Replaced pm_runtime_resume_and_get with unconditional pm_runtime_get_sync() in config(). * Restored duty_cycle > period check in rzg2l_gpt_get_state(). * Added error check for clk_prepare_enable() in probe() and propagating error to the caller for pm_runtime_resume() * clk_get_rate() is called after enabling the clock and clk_rate_exclusive_get() * Simplified rzg2l_gpt_probe() by removing bitmap variables. * Added pm_runtime_idle() to suspend the device during probe. * Moved overflow condition check from config->probe(). * Simplified rzg2l_gpt_reset_assert_pm_disable(). * Removed the parenthesis for RZG2L_MAX_POEG_GROUPS. * Renamed rzg2l_gpt_parse_properties()->rzg2l_gpt_poeg_init() as it not only parse the properties but also implements the needed register writes. * Added acomment here about the purpose of the function rzg2l_gpt_poeg_init() * Removed magic numbers from rzg2l_gpt_poeg_init() * Fixed resource leak in rzg2l_gpt_poeg_init(). v12->v13: * Added test logs in [1] below * Replaced Kconfig dependency from ARCH_RENESAS->ARCH_RZG2L * Sorted #include <linux/limits.h> alphabetically * Added a comment for mutex_lock to fix check patch warning * Replaced data type of duty_cycle from unsigned int->u32 as the maximum value stored is U32_MAX. * Improved rzg2l_gpt_config() by removing unwanted duty_cycle related code. * Improved rzg2l_gpt_get_state() by setting "val = rzg2l_gpt->duty_cycle[pwm->hwpwm];", and factor "tmp = NSEC_PER_SEC * (u64)val;" out of the if-statement. * Started using DEFINE_RUNTIME_DEV_PM_OPS(), and dropped __maybe_unused from the callbacks. v11->v12: * Added return code for get_state() * Cache duty cycle/prescale as the driver cannot read the current duty cycle/prescale from the hardware if the hardware is disabled. Cache the last programmed duty cycle/prescale value to return in that case. * Updated rzg2l_gpt_enable to enable the clocks. * Updated rzg2l_gpt_disable to disable the clocks. * Updated rzg2l_gpt_config() to cache duty cucle/prescale value * Updated rzg2l_gpt_get_state to use cached value of duty cycle/prescale,If the PWM is disabled. * Simplified rzg2l_gpt_apply() * Added comments in rzg2l_gpt_reset_assert_pm_disable() v10->v11: * Used bitmap_zero for initializing bitmap varable. * Fixed clock imbalance during remove for the case bootloader turning on PWM and module unload is called just after the boot. * Fixed over flow condition in get_state() for a prescale value of 2 & more. * Improved rzg2l_gpt_cntr_need_stop() based on prescale as it is the only runtime variable. * Added array for Cache variables state_period and prescale * Probe caches the prescale value set by the bootloader. * Updated rzg2l_gpt_config() to make use of array variables. v9->v10: * Updated the example gpt4: pwm@10048400-> gpt: pwm@10048000 * Keep Rb tag from Rob as the above change is trivial one. * Updated the error handling in probe(), clk_disable_unprepare called on the error path. * Removed ch_en array and started using bitmask instead. v8->v9: * Added Rb tag from Rob. * deassert after devm_clk_get() to avoid reset stays deasserted,in case clk_get() fails. * Removed ch_offs from struct rzg2l_gpt_chip and use macro instead. * Updated error handling in probe() v7->v8: * Removed Rb tags from Rob and Geert as it modelled as single GPT device handling multiple channels. * Updated description * Updated interrupts and interrupt-names properties * Updated binding example * Modelled as single PWM device handling multiple channels * Replaced shared reset->devm_reset_control_get_exclusive() * Added PM runtime callbacks * Updated PM handling and removed "pwm_enabled_by_bootloader" variable * Replaced iowrite32->writel and ioread32->readl * Updated prescale calculation * Introduced rzg2l_gpt_is_ch_enabled for checking enable status on both IO's * Moved enable/disable output pins from config->enable/disable. * Added rzg2l_gpt_cntr_need_stop() for caching prescalar/mode values. v6->v7: * Added the comment for cacheing rzg2l_gpt->state_period. * Fixed boundary values for pv and dc. * Added comment for modifying mode, prescaler, timer counter and buffer enable registers. * Fixed buffer overflow in get_state() * Removed unnecessary assignment of state->period value in get_state(). * Fixed state->duty_cycle value in get_state(). * Added a limitation for disabling the channels, when both channels used v5->v6: * Updated macros RZG2L_GTIOR_GTIOB_OUT_HI_END_TOGGLE_CMP_MATCH and RZG2L_GTIOR_GTIOB_OUT_LO_END_TOGGLE_CMP_MATCH with computation involving FIELD_PREP macro. * Removed struct rzg2l_gpt_phase and started using RZG2L_GTCCR macro for duty_offset. * replaced misnomer real_period->state_period. * Added handling for values >= (1024 << 32) for both period and duty cycle. * Added comments for pwm {en,dis}abled by bootloader during probe. v4->v5: * Added Hardware manual details * Replaced the comment GTCNT->Counter * Removed the macros RZG2L_GPT_IO_PER_CHANNEL and chip.npwm directly used in probe. * Removed the unsed macro RZG2L_GTPR_MAX_VALUE * Added driver prefix for the type name and the variable. * Initialization of per_channel data moved from request->probe. * Updated clr parameter for rzg2l_gpt_modify for Start count. * Started using mutex and usage_count for handling shared period and prescalar for the 2 channels. * Updated the comment cycle->period. * Removed clk_disable from rzg2l_gpt_reset_assert_pm_disable() * Replaced pc->rzg2l_gpt. * Updated prescale calculation. * Moved pm_runtime_{get_sync,put} from {request,free}->{enable,disable} * Removed platform_set_drvdata as it is unused * Removed the variable pwm_enabled_by_bootloader * Added dev_err_probe in various probe error path. * Added an error message, if devm_pwmchip_add fails. v3->v4: * Changed the local variable type i from u16->u8 and prescaled_period_ cycles from u64->u32 in calculate_prescale(). * Replaced mul_u64_u64_div_u64()->mul_u64_u32_div() * Dropped the comma after the sentinel. * Add a variable to track pwm enabled by bootloader and added comments in probe(). * Removed unnecessary rzg2l_gpt_reset_assert_pm_disable() from probe. * Replaced devm_clk_get()->devm_clk_get_prepared() * Removed devm_clk_get_optional_enabled() v2->v3: * Added Rb tag from Rob for the bindings. * Updated limitation section * Added prefix "RZG2L_" for all macros * Modified prescale calculation * Removed pwm_set_chip_data * Updated comment related to modifying Mode and Prescaler * Updated setting of prescale value in rzg2l_gpt_config() * Removed else branch from rzg2l_gpt_get_state() * removed the err label from rzg2l_gpt_apply() * Added devm_clk_get_optional_enabled() to retain clk on status, in case bootloader turns on the clk of pwm. * Replaced devm_reset_control_get_exclusive->devm_reset_control_get_shared as single reset shared between 8 channels. v1->v2: * Added '|' after 'description:' to preserve formatting. * Removed description for pwm_cells as it is common property. * Changed the reg size in example from 0xa4->0x100 * Added Rb tag from Geert for bindings. * Added Limitations section * dropped "_MASK" from the define names. * used named initializer for struct phase * Added gpt_pwm_device into a flexible array member in rzg2l_gpt_chip * Revised the logic for prescale * Added .get_state callback * Improved error handling in rzg2l_gpt_apply * Removed .remove callback * Tested the driver with PWM_DEBUG enabled. RFC->v1: * Added Description in binding patch * Removed comments from reg and clock * replaced rzg2l_gpt_write_mask()->rzg2l_gpt_modify() * Added rzg2l_gpt_read() and updated macros * Removed dtsi patches, will send it separately RFC: * https://lore.kernel.org/linux-renesas-soc/20220430075915.5036-1-biju.das.jz@xxxxxxxxxxxxxx/T/#t Biju Das (4): dt-bindings: pwm: Add RZ/G2L GPT binding dt-bindings: pwm: rzg2l-gpt: Document renesas,poegs property pwm: Add support for RZ/G2L GPT pwm: rzg2l-gpt: Add support for gpt linking with poeg .../bindings/pwm/renesas,rzg2l-gpt.yaml | 401 +++++++++++ drivers/pwm/Kconfig | 11 + drivers/pwm/Makefile | 1 + drivers/pwm/pwm-rzg2l-gpt.c | 633 ++++++++++++++++++ 4 files changed, 1046 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/renesas,rzg2l-gpt.yaml create mode 100644 drivers/pwm/pwm-rzg2l-gpt.c base-commit: cf70d01a62c712ee715df1f7892b58c77474bcfb -- 2.25.1
