Re: [PATCH v3 2/2] drivers: watchdog: Add StarFive Watchdog driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2023/2/26 22:14, Emil Renner Berthing wrote:
> On Mon, 20 Feb 2023 at 09:21, Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx> wrote:
>>
>> Add watchdog driver for the StarFive JH7110 SoC.
>>
>> Signed-off-by: Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>
>> ---
>>  MAINTAINERS                     |   7 +
>>  drivers/watchdog/Kconfig        |   9 +
>>  drivers/watchdog/Makefile       |   2 +
>>  drivers/watchdog/starfive-wdt.c | 651 ++++++++++++++++++++++++++++++++
>>  4 files changed, 669 insertions(+)
>>  create mode 100644 drivers/watchdog/starfive-wdt.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 135d93368d36..6cbcf08fa76a 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -19933,6 +19933,13 @@ F:     Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
>>  F:     drivers/reset/reset-starfive-jh7100.c
>>  F:     include/dt-bindings/reset/starfive-jh7100.h
>>
>> +STARFIVE JH7110 WATCHDOG DRIVER
>> +M:     Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>
>> +M:     Samin Guo <samin.guo@xxxxxxxxxxxxxxxx>
>> +S:     Supported
>> +F:     Documentation/devicetree/bindings/watchdog/starfive*
>> +F:     drivers/watchdog/starfive-wdt.c
>> +
>>  STATIC BRANCH/CALL
>>  M:     Peter Zijlstra <peterz@xxxxxxxxxxxxx>
>>  M:     Josh Poimboeuf <jpoimboe@xxxxxxxxxx>
>> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
>> index 0bc40b763b06..4608eb5c9501 100644
>> --- a/drivers/watchdog/Kconfig
>> +++ b/drivers/watchdog/Kconfig
>> @@ -2089,6 +2089,15 @@ config UML_WATCHDOG
>>         tristate "UML watchdog"
>>         depends on UML || COMPILE_TEST
>>
>> +config STARFIVE_WATCHDOG
>> +       tristate "StarFive Watchdog support"
>> +       depends on RISCV
> 
> Let's do like the pinctrl and clock drivers and
> 
>     depends SOC_STARFIVE || COMPILE_TEST
> 

Yes, will use 'ARCH_STARFIVE' instead.

>> +       select WATCHDOG_CORE
>> +       default SOC_STARFIVE
>> +       help
>> +         Say Y here to support the watchdog of StarFive JH7110 SoC.
>> +         This driver can also be built as a module if choose M.
>> +
>>  #
>>  # ISA-based Watchdog Cards
>>  #
>> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
>> index 9cbf6580f16c..4c0bd377e92a 100644
>> --- a/drivers/watchdog/Makefile
>> +++ b/drivers/watchdog/Makefile
>> @@ -211,6 +211,8 @@ obj-$(CONFIG_WATCHDOG_SUN4V)                += sun4v_wdt.o
>>  # Xen
>>  obj-$(CONFIG_XEN_WDT) += xen_wdt.o
>>
>> +obj-$(CONFIG_STARFIVE_WATCHDOG) += starfive-wdt.o
>> +
>>  # Architecture Independent
>>  obj-$(CONFIG_BD957XMUF_WATCHDOG) += bd9576_wdt.o
>>  obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
>> diff --git a/drivers/watchdog/starfive-wdt.c b/drivers/watchdog/starfive-wdt.c
>> new file mode 100644
>> index 000000000000..dfbb80406076
>> --- /dev/null
>> +++ b/drivers/watchdog/starfive-wdt.c
>> @@ -0,0 +1,651 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Starfive Watchdog driver
>> + *
>> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/iopoll.h>
>> +#include <linux/module.h>
>> +#include <linux/of_device.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/reset.h>
>> +#include <linux/watchdog.h>
>> +
>> +/* JH7110 WatchDog register define */
>> +#define STARFIVE_WDT_JH7110_LOAD       0x000   /* RW: Watchdog load register */
>> +#define STARFIVE_WDT_JH7110_VALUE      0x004   /* RO: The current value for the watchdog counter */
>> +#define STARFIVE_WDT_JH7110_CONTROL    0x008   /*
>> +                                                * RW:
>> +                                                * [0]: reset enable;
>> +                                                * [1]: int enable/wdt enable/reload counter;
>> +                                                * [31:2]: reserve.
>> +                                                */
>> +#define STARFIVE_WDT_JH7110_INTCLR     0x00c   /* WO: clear intterupt && reload the counter */
>> +#define STARFIVE_WDT_JH7110_RIS                0x010   /* RO: Raw interrupt status from the counter */
>> +#define STARFIVE_WDT_JH7110_IMS                0x014   /* RO: Enabled interrupt status from the counter */
>> +#define STARFIVE_WDT_JH7110_LOCK       0xc00   /*
>> +                                                * RO: Enable write access to all other registers
>> +                                                * by writing 0x1ACCE551.
>> +                                                */
> 
> This driver is clearly prepared to support multiple SoCs, so hopefully
> you've tested that internally. It would be great if you could leave in
> the support for the JH7100 in the next revision. This would also make
> all the indirection make a lot more sense.

The JH7100 watchdog is little different from the 7110 and this driver only
needs to change and add some control register layout and mask to support the 7100.
And the JH8100 watchdog is the same as the 7110 but the 8100 is still in the plan.
So the dt-bingdings need to rename, and which one could be better,
'starfive,jh71x0-wdt.yaml' or 'starfive,jh-wdt.yaml'?

> 
>> +/* WDOGCONTROL */
>> +#define STARFIVE_WDT_ENABLE                    0x1
>> +#define STARFIVE_WDT_JH7110_EN_SHIFT           0
>> +#define STARFIVE_WDT_RESET_EN                  0x1
>> +#define STARFIVE_WDT_JH7110_RESEN_SHIFT                1
>> +
>> +/* WDOGLOCK */
>> +#define STARFIVE_WDT_LOCKED                    BIT(0)
>> +#define STARFIVE_WDT_JH7110_UNLOCK_KEY         0x1acce551
>> +
>> +/* WDOGINTCLR */
>> +#define STARFIVE_WDT_INTCLR                    0x1
>> +
>> +#define STARFIVE_WDT_MAXCNT                    0xffffffff
>> +#define STARFIVE_WDT_DEFAULT_TIME              (15)
>> +#define STARFIVE_WDT_DELAY_US                  0
>> +#define STARFIVE_WDT_TIMEOUT_US                        10000
>> +
>> +/* module parameter */
>> +#define STARFIVE_WDT_EARLY_ENA                 0
>> +
>> +static bool nowayout = WATCHDOG_NOWAYOUT;
>> +static int heartbeat;
>> +static int early_enable = STARFIVE_WDT_EARLY_ENA;
>> +
>> +module_param(heartbeat, int, 0);
>> +module_param(early_enable, int, 0);
> 
> This also looks like a bool parameter.

Oh will modify it.

> 
>> +module_param(nowayout, bool, 0);
>> +
>> +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (default="
>> +                __MODULE_STRING(STARFIVE_WDT_DEFAULT_TIME) ")");
>> +MODULE_PARM_DESC(early_enable,
>> +                "Watchdog is started at boot time if set to 1, default="
>> +                __MODULE_STRING(STARFIVE_WDT_EARLY_ENA));
>> +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
>> +                __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
>> +
>> +struct starfive_wdt_variant {
>> +       u32 control;
>> +       u32 load;
>> +       u32 enable;
>> +       u32 value;
>> +       u32 int_clr;
>> +       u32 unlock;
> 
> These are register offsets and not the values of registers, so could
> be just unsigned int.

Will modify it.

> 
>> +       u32 unlock_key;
>> +       u32 irq_is_raise;
>> +       u8 enrst_shift;
>> +       u8 en_shift;
>> +};
>> +
>> +struct starfive_wdt {
>> +       unsigned long freq;
>> +       struct device *dev;
>> +       struct watchdog_device wdt_device;
>> +       struct clk *core_clk;
>> +       struct clk *apb_clk;
>> +       struct reset_control *rsts;
>> +       const struct starfive_wdt_variant *drv_data;
>> +       u32 count;      /*count of timeout*/
>> +       u32 reload;     /*restore the count*/
>> +       void __iomem *base;
>> +       spinlock_t lock;        /* spinlock for register handling */
>> +};
>> +
>> +/* Register bias in JH7110 */
> 
> bias? Maybe "register layout for the JH7110".

Will use 'register layout' instead.

> 
>> +static const struct starfive_wdt_variant drv_data_jh7110 = {
>> +       .control = STARFIVE_WDT_JH7110_CONTROL,
>> +       .load = STARFIVE_WDT_JH7110_LOAD,
>> +       .enable = STARFIVE_WDT_JH7110_CONTROL,
>> +       .value = STARFIVE_WDT_JH7110_VALUE,
>> +       .int_clr = STARFIVE_WDT_JH7110_INTCLR,
>> +       .unlock = STARFIVE_WDT_JH7110_LOCK,
>> +       .unlock_key = STARFIVE_WDT_JH7110_UNLOCK_KEY,
>> +       .irq_is_raise = STARFIVE_WDT_JH7110_IMS,
>> +       .enrst_shift = STARFIVE_WDT_JH7110_RESEN_SHIFT,
>> +       .en_shift = STARFIVE_WDT_JH7110_EN_SHIFT,
>> +};
>> +
>> +static const struct of_device_id starfive_wdt_match[] = {
>> +       { .compatible = "starfive,jh7110-wdt", .data = &drv_data_jh7110 },
>> +       {}
> 
> I like the idiom of ending with { /* sentinel */ } here. Also it is
> common to place this struct just above the platform_driver struct
> which is the only user.

Will add it.

> 
>> +};
>> +MODULE_DEVICE_TABLE(of, starfive_wdt_match);
>> +
>> +static const struct platform_device_id starfive_wdt_ids[] = {
>> +       {
>> +               .name = "starfive-jh7110-wdt",
>> +               .driver_data = (unsigned long)&drv_data_jh7110,
>> +       },
>> +       {}
>> +};
>> +MODULE_DEVICE_TABLE(platform, starfive_wdt_ids);
> 
> When is this struct used? So far I only know of device tree enabled users.

The struct will be used when CONFIG_OF is disabled
but I deleted CONFIG_OF by mistake.
Should I add the CONFIG_OF back or remove this struct?

> 
>> +static int starfive_wdt_get_clock_rate(struct starfive_wdt *wdt)
>> +{
>> +       wdt->freq = clk_get_rate(wdt->core_clk);
>> +       /* The clock rate should not be 0.*/
>> +       if (wdt->freq)
>> +               return 0;
>> +
>> +       dev_err(wdt->dev, "get clock rate failed.\n");
>> +       return -ENOENT;
>> +}
>> +
>> +static int starfive_wdt_get_clock(struct starfive_wdt *wdt)
>> +{
>> +       wdt->apb_clk = devm_clk_get(wdt->dev, "apb");
>> +       if (IS_ERR(wdt->apb_clk)) {
>> +               dev_err(wdt->dev, "failed to get apb clock.\n");
>> +               return PTR_ERR(wdt->apb_clk);
>> +       }
>> +
>> +       wdt->core_clk = devm_clk_get(wdt->dev, "core");
>> +       if (IS_ERR(wdt->core_clk)) {
>> +               dev_err(wdt->dev, "failed to get core clock.\n");
>> +               return PTR_ERR(wdt->core_clk);
>> +       }
> 
> Here and above you can use dev_err_probe which will also not print
> errors on -EPROBE_DEFER.

Will modify it.

> 
>> +       return 0;
>> +}
>> +
>> +static int starfive_wdt_reset_init(struct starfive_wdt *wdt)
>> +{
>> +       int ret = 0;
>> +
>> +       wdt->rsts = devm_reset_control_array_get_exclusive(wdt->dev);
>> +       if (IS_ERR(wdt->rsts)) {
>> +               dev_err(wdt->dev, "failed to get rsts error.\n");
>> +               ret = PTR_ERR(wdt->rsts);
>> +       } else {
>> +               ret = reset_control_deassert(wdt->rsts);
>> +               if (ret)
>> +                       dev_err(wdt->dev, "failed to deassert rsts.\n");
>> +       }
>> +       return ret;
>> +}
> 
> How about something like
> int ret;
> 
> wdt->rsts = devm_reset_control_array_get_exclusive(wdt->dev);
> if (IS_ERR(wdt->rsts))
>     return dev_err_probe(wdt->dev, PTR_ERR(wdt->rsts), "failed to get
> resets\n");
> 
> ret = reset_control_deassert(wdt->rsts);
> return dev_err_probe(wdt->dev, ret, "failed to deassert resets\n");

It looks more concise. Thanks.

> 
>> +
>> +static u32 starfive_wdt_ticks_to_sec(struct starfive_wdt *wdt, u32 ticks)
>> +{
>> +       return DIV_ROUND_CLOSEST(ticks, wdt->freq);
>> +}
>> +
>> +/*
>> + * Write unlock-key to unlock. Write other value to lock. When lock bit is 1,
>> + * external accesses to other watchdog registers are ignored.
>> + */
>> +static bool starfive_wdt_is_locked(struct starfive_wdt *wdt)
>> +{
>> +       u32 val;
>> +
>> +       val = readl(wdt->base + wdt->drv_data->unlock);
>> +       return !!(val & STARFIVE_WDT_LOCKED);
>> +}
>> +
>> +static void starfive_wdt_unlock(struct starfive_wdt *wdt)
>> +{
>> +       if (starfive_wdt_is_locked(wdt))
>> +               writel(wdt->drv_data->unlock_key,
>> +                      wdt->base + wdt->drv_data->unlock);
>> +}
>> +
>> +static void starfive_wdt_lock(struct starfive_wdt *wdt)
>> +{
>> +       if (!starfive_wdt_is_locked(wdt))
>> +               writel(~wdt->drv_data->unlock_key,
>> +                      wdt->base + wdt->drv_data->unlock);
>> +}
>> +
>> +/* enable watchdog interrupt to reset/reboot */
>> +static void starfive_wdt_enable_reset(struct starfive_wdt *wdt)
>> +{
>> +       u32 val;
>> +
>> +       val = readl(wdt->base + wdt->drv_data->control);
>> +       val |= STARFIVE_WDT_RESET_EN << wdt->drv_data->enrst_shift;
>> +       writel(val, wdt->base + wdt->drv_data->control);
>> +}
>> +
>> +/* disable watchdog interrupt to reset/reboot */
>> +static void starfive_wdt_disable_reset(struct starfive_wdt *wdt)
>> +{
>> +       u32 val;
>> +
>> +       val = readl(wdt->base + wdt->drv_data->control);
>> +       val &= ~(STARFIVE_WDT_RESET_EN << wdt->drv_data->enrst_shift);
>> +       writel(val, wdt->base + wdt->drv_data->control);
>> +}
>> +
>> +/* interrupt status whether has been raised from the counter */
>> +static bool starfive_wdt_raise_irq_status(struct starfive_wdt *wdt)
>> +{
>> +       return !!readl(wdt->base + wdt->drv_data->irq_is_raise);
>> +}
>> +
>> +/* clear interrupt signal before initialization or reload */
>> +static void starfive_wdt_int_clr(struct starfive_wdt *wdt)
>> +{
>> +       writel(STARFIVE_WDT_INTCLR, wdt->base + wdt->drv_data->int_clr);
>> +}
>> +
>> +static inline void starfive_wdt_set_count(struct starfive_wdt *wdt, u32 val)
>> +{
>> +       writel(val, wdt->base + wdt->drv_data->load);
>> +}
>> +
>> +static inline u32 starfive_wdt_get_count(struct starfive_wdt *wdt)
>> +{
>> +       return readl(wdt->base + wdt->drv_data->value);
>> +}
>> +
>> +/* enable watchdog */
>> +static inline void starfive_wdt_enable(struct starfive_wdt *wdt)
>> +{
>> +       u32 val;
>> +
>> +       val = readl(wdt->base + wdt->drv_data->enable);
>> +       val |= STARFIVE_WDT_ENABLE << wdt->drv_data->en_shift;
>> +       writel(val, wdt->base + wdt->drv_data->enable);
>> +}
>> +
>> +/* disable watchdog */
>> +static inline void starfive_wdt_disable(struct starfive_wdt *wdt)
>> +{
>> +       u32 val;
>> +
>> +       val = readl(wdt->base + wdt->drv_data->enable);
>> +       val &= ~(STARFIVE_WDT_ENABLE << wdt->drv_data->en_shift);
>> +       writel(val, wdt->base + wdt->drv_data->enable);
>> +}
>> +
>> +static inline void starfive_wdt_set_reload_count(struct starfive_wdt *wdt, u32 count)
>> +{
>> +       starfive_wdt_set_count(wdt, count);
>> +       /* need enable controller to reload counter */
>> +       starfive_wdt_enable(wdt);
>> +}
>> +
>> +static unsigned int starfive_wdt_max_timeout(struct starfive_wdt *wdt)
>> +{
>> +       return DIV_ROUND_UP(STARFIVE_WDT_MAXCNT, (wdt->freq / 2)) - 1;
>> +}
>> +
>> +static unsigned int starfive_wdt_get_timeleft(struct watchdog_device *wdd)
>> +{
>> +       struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
>> +       u32 count;
>> +
>> +       starfive_wdt_unlock(wdt);
>> +       /*
>> +        * Because set half count value,
>> +        * timeleft value should add the count value before first timeout.
>> +        */
>> +       count = starfive_wdt_get_count(wdt);
>> +       if (!starfive_wdt_raise_irq_status(wdt))
>> +               count += wdt->count;
>> +
>> +       starfive_wdt_lock(wdt);
>> +
>> +       return starfive_wdt_ticks_to_sec(wdt, count);
>> +}
>> +
>> +static int starfive_wdt_keepalive(struct watchdog_device *wdd)
>> +{
>> +       struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
>> +
>> +       spin_lock(&wdt->lock);
>> +
>> +       starfive_wdt_unlock(wdt);
>> +       starfive_wdt_int_clr(wdt);
>> +       starfive_wdt_set_reload_count(wdt, wdt->count);
>> +       starfive_wdt_lock(wdt);
>> +
>> +       spin_unlock(&wdt->lock);
>> +
>> +       return 0;
>> +}
>> +
>> +static int starfive_wdt_stop(struct watchdog_device *wdd)
>> +{
>> +       struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
>> +
>> +       spin_lock(&wdt->lock);
>> +
>> +       starfive_wdt_unlock(wdt);
>> +       starfive_wdt_disable_reset(wdt);
>> +       starfive_wdt_int_clr(wdt);
>> +       starfive_wdt_disable(wdt);
>> +       starfive_wdt_lock(wdt);
>> +
>> +       spin_unlock(&wdt->lock);
>> +
>> +       return 0;
>> +}
>> +
>> +static int starfive_wdt_pm_stop(struct watchdog_device *wdd)
>> +{
>> +       struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
>> +
>> +       starfive_wdt_stop(wdd);
>> +       pm_runtime_put_sync(wdt->dev);
>> +
>> +       return 0;
>> +}
>> +
>> +static int starfive_wdt_start(struct watchdog_device *wdd)
>> +{
>> +       struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
>> +
>> +       spin_lock(&wdt->lock);
>> +       starfive_wdt_unlock(wdt);
>> +       /* disable watchdog, to be safe */
>> +       starfive_wdt_disable(wdt);
>> +
>> +       starfive_wdt_enable_reset(wdt);
>> +       starfive_wdt_int_clr(wdt);
>> +       starfive_wdt_set_count(wdt, wdt->count);
>> +       starfive_wdt_enable(wdt);
>> +
>> +       starfive_wdt_lock(wdt);
>> +       spin_unlock(&wdt->lock);
>> +
>> +       return 0;
>> +}
>> +
>> +static int starfive_wdt_pm_start(struct watchdog_device *wdd)
>> +{
>> +       struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
>> +
>> +       pm_runtime_get_sync(wdt->dev);
>> +
>> +       return starfive_wdt_start(wdd);
>> +}
>> +
>> +static int starfive_wdt_set_timeout(struct watchdog_device *wdd,
>> +                                   unsigned int timeout)
>> +{
>> +       struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
>> +       unsigned long freq = wdt->freq;
>> +
>> +       spin_lock(&wdt->lock);
>> +
>> +       /*
>> +        * This watchdog takes twice timeouts to reset.
>> +        * In order to reduce time to reset, should set half count value.
>> +        */
>> +       wdt->count = timeout * freq / 2;
>> +       wdd->timeout = timeout;
>> +
>> +       starfive_wdt_unlock(wdt);
>> +       starfive_wdt_disable(wdt);
>> +       starfive_wdt_set_reload_count(wdt, wdt->count);
>> +       starfive_wdt_enable(wdt);
>> +       starfive_wdt_lock(wdt);
>> +
>> +       spin_unlock(&wdt->lock);
>> +
>> +       return 0;
>> +}
>> +
>> +#define OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE)
>> +
>> +static const struct watchdog_info starfive_wdt_ident = {
>> +       .options = OPTIONS,
>> +       .identity = "StarFive Watchdog",
>> +};
>> +
>> +static const struct watchdog_ops starfive_wdt_ops = {
>> +       .owner = THIS_MODULE,
>> +       .start = starfive_wdt_pm_start,
>> +       .stop = starfive_wdt_pm_stop,
>> +       .ping = starfive_wdt_keepalive,
>> +       .set_timeout = starfive_wdt_set_timeout,
>> +       .get_timeleft = starfive_wdt_get_timeleft,
>> +};
>> +
>> +static const struct watchdog_device starfive_wdd = {
>> +       .info = &starfive_wdt_ident,
>> +       .ops = &starfive_wdt_ops,
>> +       .timeout = STARFIVE_WDT_DEFAULT_TIME,
>> +};
>> +
>> +static inline const struct starfive_wdt_variant *
>> +starfive_wdt_get_drv_data(struct platform_device *pdev)
>> +{
>> +       const struct starfive_wdt_variant *variant;
>> +
>> +       variant = of_device_get_match_data(&pdev->dev);
>> +       if (!variant) {
>> +               /* Device matched by platform_device_id */
>> +               variant = (struct starfive_wdt_variant *)
>> +                          platform_get_device_id(pdev)->driver_data;
>> +       }
>> +
>> +       return variant;
>> +}
> 
> If this driver is only used through the device tree this whole
> function can just be a call to of_device_get_match_data()

Well, if remove the platform_device_id struct, just use of_device_get_match_data().

> 
>> +static int starfive_wdt_probe(struct platform_device *pdev)
>> +{
>> +       struct device *dev = &pdev->dev;
>> +       struct starfive_wdt *wdt;
>> +       int ret;
>> +
>> +       wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
>> +       if (!wdt)
>> +               return -ENOMEM;
>> +
>> +       wdt->dev = dev;
>> +       spin_lock_init(&wdt->lock);
>> +       wdt->wdt_device = starfive_wdd;
>> +
>> +       wdt->drv_data = starfive_wdt_get_drv_data(pdev);
>> +
>> +       /* get the memory region for the watchdog timer */
>> +       wdt->base = devm_platform_ioremap_resource(pdev, 0);
>> +       if (IS_ERR(wdt->base)) {
>> +               ret = PTR_ERR(wdt->base);
>> +               return ret;
>> +       }
>> +
>> +       platform_set_drvdata(pdev, wdt);
>> +       pm_runtime_enable(wdt->dev);
>> +
>> +       ret = starfive_wdt_get_clock(wdt);
>> +       if (ret)
>> +               return ret;
>> +
>> +       if (pm_runtime_enabled(wdt->dev)) {
>> +               ret = pm_runtime_get_sync(wdt->dev);
>> +               if (ret < 0)
>> +                       return ret;
>> +       } else {
>> +               /* runtime PM is disabled but clocks need to be enabled */
>> +               ret = clk_prepare_enable(wdt->apb_clk);
>> +               if (ret) {
>> +                       dev_err(wdt->dev, "failed to enable apb_clk.\n");
>> +                       return ret;
>> +               }
>> +               ret = clk_prepare_enable(wdt->core_clk);
>> +               if (ret) {
>> +                       dev_err(wdt->dev, "failed to enable core_clk.\n");
>> +                       goto err_apb_clk_disable;
>> +               }
>> +       }
> 
> The else part is basically starfive_wdt_runtime_resume(). Maybe just call that.

The starfive_wdt_runtime_resume() is defined under CONFIG_PM and it could not
be used directly. I should use a new function that enable/disable clock and
can be used in starfive_wdt_runtime_resume() and here.

> 
> 
>> +       ret = starfive_wdt_get_clock_rate(wdt);
>> +       if (ret)
>> +               goto err_clk_disable;
>> +
>> +       ret = starfive_wdt_reset_init(wdt);
>> +       if (ret)
>> +               goto err_clk_disable;
>> +
>> +       wdt->wdt_device.min_timeout = 1;
>> +       wdt->wdt_device.max_timeout = starfive_wdt_max_timeout(wdt);
>> +
>> +       watchdog_set_drvdata(&wdt->wdt_device, wdt);
>> +
>> +       /*
>> +        * see if we can actually set the requested heartbeat,
>> +        * and if not, try the default value.
>> +        */
>> +       watchdog_init_timeout(&wdt->wdt_device, heartbeat, dev);
>> +       if (wdt->wdt_device.timeout == 0 ||
>> +           wdt->wdt_device.timeout > wdt->wdt_device.max_timeout) {
>> +               dev_warn(dev, "heartbeat value out of range, default %d used\n",
>> +                        STARFIVE_WDT_DEFAULT_TIME);
>> +               wdt->wdt_device.timeout = STARFIVE_WDT_DEFAULT_TIME;
>> +       }
>> +       starfive_wdt_set_timeout(&wdt->wdt_device, wdt->wdt_device.timeout);
>> +
>> +       watchdog_set_nowayout(&wdt->wdt_device, nowayout);
>> +       watchdog_stop_on_reboot(&wdt->wdt_device);
>> +       watchdog_stop_on_unregister(&wdt->wdt_device);
>> +
>> +       wdt->wdt_device.parent = dev;
>> +
>> +       ret = watchdog_register_device(&wdt->wdt_device);
>> +       if (ret)
>> +               goto err_clk_disable;
>> +
>> +       if (early_enable) {
>> +               starfive_wdt_start(&wdt->wdt_device);
>> +               set_bit(WDOG_HW_RUNNING, &wdt->wdt_device.status);
>> +       } else {
>> +               starfive_wdt_stop(&wdt->wdt_device);
>> +       }
>> +
>> +       pm_runtime_put_sync(wdt->dev);
>> +
>> +       return 0;
>> +
>> +err_clk_disable:
>> +       clk_disable_unprepare(wdt->core_clk);
>> +err_apb_clk_disable:
>> +       clk_disable_unprepare(wdt->apb_clk);
>> +       pm_runtime_disable(wdt->dev);
>> +
>> +       return ret;
>> +}
>> +
>> +static int starfive_wdt_remove(struct platform_device *dev)
>> +{
>> +       struct starfive_wdt *wdt = platform_get_drvdata(dev);
>> +
>> +       starfive_wdt_stop(&wdt->wdt_device);
>> +       watchdog_unregister_device(&wdt->wdt_device);
>> +
>> +       if (pm_runtime_enabled(wdt->dev)) {
>> +               pm_runtime_disable(wdt->dev);
>> +       } else {
>> +               /* disable clock without PM */
>> +               clk_disable_unprepare(wdt->core_clk);
>> +               clk_disable_unprepare(wdt->apb_clk);
>> +       }
>> +
>> +       return 0;
>> +}
>> +
>> +static void starfive_wdt_shutdown(struct platform_device *dev)
>> +{
>> +       struct starfive_wdt *wdt = platform_get_drvdata(dev);
>> +
>> +       starfive_wdt_pm_stop(&wdt->wdt_device);
>> +}
>> +
>> +#ifdef CONFIG_PM_SLEEP
>> +static int starfive_wdt_suspend(struct device *dev)
>> +{
>> +       int ret;
>> +       struct starfive_wdt *wdt = dev_get_drvdata(dev);
>> +
>> +       starfive_wdt_unlock(wdt);
>> +
>> +       /* Save watchdog state, and turn it off. */
>> +       wdt->reload = starfive_wdt_get_count(wdt);
>> +
>> +       /* Note that WTCNT doesn't need to be saved. */
>> +       starfive_wdt_stop(&wdt->wdt_device);
>> +       pm_runtime_force_suspend(dev);
>> +
>> +       starfive_wdt_lock(wdt);
>> +
>> +       return 0;
>> +}
>> +
>> +static int starfive_wdt_resume(struct device *dev)
>> +{
>> +       int ret;
>> +       struct starfive_wdt *wdt = dev_get_drvdata(dev);
>> +
>> +       starfive_wdt_unlock(wdt);
>> +
>> +       pm_runtime_force_resume(dev);
>> +
>> +       /* Restore watchdog state. */
>> +       starfive_wdt_set_reload_count(wdt, wdt->reload);
>> +
>> +       starfive_wdt_start(&wdt->wdt_device);
>> +
>> +       starfive_wdt_lock(wdt);
>> +
>> +       return 0;
>> +}
>> +#endif /* CONFIG_PM_SLEEP */
>> +
>> +#ifdef CONFIG_PM
>> +static int starfive_wdt_runtime_suspend(struct device *dev)
>> +{
>> +       struct starfive_wdt *wdt = dev_get_drvdata(dev);
>> +
>> +       clk_disable_unprepare(wdt->apb_clk);
>> +       clk_disable_unprepare(wdt->core_clk);
>> +
>> +       return 0;
>> +}
>> +
>> +static int starfive_wdt_runtime_resume(struct device *dev)
>> +{
>> +       struct starfive_wdt *wdt = dev_get_drvdata(dev);
>> +       int ret;
>> +
>> +       ret = clk_prepare_enable(wdt->apb_clk);
>> +       if (ret) {
>> +               dev_err(wdt->dev, "failed to enable apb_clk.\n");
>> +               return ret;
>> +       }
>> +
>> +       ret = clk_prepare_enable(wdt->core_clk);
>> +       if (ret)
>> +               dev_err(wdt->dev, "failed to enable core_clk.\n");
>> +
>> +       return ret;
>> +}
>> +#endif /* CONFIG_PM */
>> +
>> +static const struct dev_pm_ops starfive_wdt_pm_ops = {
>> +       SET_RUNTIME_PM_OPS(starfive_wdt_runtime_suspend, starfive_wdt_runtime_resume, NULL)
>> +       SET_SYSTEM_SLEEP_PM_OPS(starfive_wdt_suspend, starfive_wdt_resume)
>> +};
>> +
>> +static struct platform_driver starfive_wdt_driver = {
>> +       .probe          = starfive_wdt_probe,
>> +       .remove         = starfive_wdt_remove,
>> +       .shutdown       = starfive_wdt_shutdown,
>> +       .id_table       = starfive_wdt_ids,
>> +       .driver         = {
>> +               .name   = "starfive-wdt",
>> +               .pm     = &starfive_wdt_pm_ops,
>> +               .of_match_table = of_match_ptr(starfive_wdt_match),
>> +       },
>> +};
>> +
>> +module_platform_driver(starfive_wdt_driver);
>> +
>> +MODULE_AUTHOR("Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>");
>> +MODULE_AUTHOR("Samin Guo <samin.guo@xxxxxxxxxxxxxxxx>");
>> +MODULE_DESCRIPTION("StarFive Watchdog Device Driver");
>> +MODULE_LICENSE("GPL");
>> --
>> 2.25.1
>>
>>
>> _______________________________________________
>> linux-riscv mailing list
>> linux-riscv@xxxxxxxxxxxxxxxxxxx
>> http://lists.infradead.org/mailman/listinfo/linux-riscv

Best regards,
Xingyu Wu




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux