On Sun, Feb 26, 2023 at 6:37 AM Fabio Estevam <festevam@xxxxxxxxx> wrote:
>
> On Sat, Feb 25, 2023 at 8:37 AM Alistair Francis <alistair@xxxxxxxxxxxxx> wrote:
>
> > +&i2c2 {
> > + clock-frequency = <100000>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c2>;
> > + status = "okay";
> > +
> > + bd71815: pmic@4b {
> > + compatible = "rohm,bd71815";
> > + reg = <0x4b>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_bd71815>;
> > + interrupt-parent = <&gpio6>; /* PMIC_INT_B GPIO6_IO16 */
> > + interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
> > + gpio-controller;
> > + clocks = <&clks IMX7D_CLKO2_ROOT_SRC>;
> > + clock-output-names = "bd71815-32k-out";
> > + #clock-cells = <0>;
> > + #gpio-cells = <1>;
>
> The binding document says #gpio-cells = <2>;
Fixed!
>
> > +
> > + regulators {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + buck1_reg: regulator@0 {
> > + reg = <0>;
>
> The regulator@0 and reg should not be present.
Fixed
>
> Please check Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
Thanks, I double checked my latest code against the bindings.
Alistair
