On 25/02/2023 15:25, Hardevsinh Palaniya wrote:
> From: HardevSinh Palaniya <hardevsinh.palaniya@xxxxxxxxxxxxxxxxx>
> Date: Sat, 25 Feb 2023 19:38:20 +0530
> Subject: [PATCH] arm64: dts: debix model-a: enable hdmi
Your patch is corrupted... See above.
>
> Enable HDMI support for Polyhex Debix Model A Board
Use subject prefixes matching the subsystem (which you can get for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching).
>
> Signed-off-by: HardevSinh Palaniya <hardevsinh.palaniya@xxxxxxxxxxxxxxxxx>
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
> index 2876d18f2a38..bc2515113ae3 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
> @@ -45,6 +45,43 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
> };
> };
>
> +
No need for two blank lines, but one.
> +&irqsteer_hdmi {
> + status = "okay";
> +};
> +
> +&hdmi_blk_ctrl {
> + status = "okay";
> +};
> +
> +&hdmi_pavi {
> + status = "okay";
> +};
> +
> +&hdmi {
> + status = "okay";
> +};
> +
> +&hdmiphy {
> + status = "okay";
> +};
> +
> +&lcdif1 {
> + status = "okay";
> +};
> +
> +&lcdif2 {
> + status = "okay";
> +};
> +
> +&lcdif3 {
> + status = "okay";
> +
> + thres-low = <1 2>; /* (FIFO * 1 / 2) */
> + thres-high = <3 4>; /* (FIFO * 3 / 4) */
> +};
> +
> +
Same problem.
> &A53_0 {
> cpu-supply = <&buck2>;
> };
Best regards,
Krzysztof
