Update the driver to support Devicetree boot as well along with ACPI.
At present the Devicetree parsing only provides the mmio region info
and is not the exact copy of ACPI parsing. This is sufficient to cater
all the current Devicetree usecases for VMBus.
Currently Devicetree is supported only for x86 systems.
Signed-off-by: Saurabh Sengar <ssengar@xxxxxxxxxxxxxxxxxxx>
---
[V7]
- Use cpu_addr instead of bus_addr
drivers/hv/Kconfig | 6 +++--
drivers/hv/vmbus_drv.c | 57 ++++++++++++++++++++++++++++++++++++++++--
2 files changed, 59 insertions(+), 4 deletions(-)
diff --git a/drivers/hv/Kconfig b/drivers/hv/Kconfig
index 0747a8f1fcee..1a55bf32d195 100644
--- a/drivers/hv/Kconfig
+++ b/drivers/hv/Kconfig
@@ -4,11 +4,13 @@ menu "Microsoft Hyper-V guest support"
config HYPERV
tristate "Microsoft Hyper-V client drivers"
- depends on ACPI && ((X86 && X86_LOCAL_APIC && HYPERVISOR_GUEST) \
- || (ARM64 && !CPU_BIG_ENDIAN))
+ depends on (X86 && X86_LOCAL_APIC && HYPERVISOR_GUEST) \
+ || (ACPI && ARM64 && !CPU_BIG_ENDIAN)
select PARAVIRT
select X86_HV_CALLBACK_VECTOR if X86
select VMAP_PFN
+ select OF if !ACPI
+ select OF_EARLY_FLATTREE if !ACPI
help
Select this option to run Linux as a Hyper-V client operating
system.
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 73497157a23a..e370721f334e 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -20,6 +20,7 @@
#include <linux/completion.h>
#include <linux/hyperv.h>
#include <linux/kernel_stat.h>
+#include <linux/of_address.h>
#include <linux/clockchips.h>
#include <linux/cpu.h>
#include <linux/sched/isolation.h>
@@ -2152,7 +2153,7 @@ void vmbus_device_unregister(struct hv_device *device_obj)
device_unregister(&device_obj->device);
}
-
+#ifdef CONFIG_ACPI
/*
* VMBUS is an acpi enumerated device. Get the information we
* need from DSDT.
@@ -2262,6 +2263,7 @@ static acpi_status vmbus_walk_resources(struct acpi_resource *res, void *ctx)
return AE_OK;
}
+#endif
static void vmbus_mmio_remove(void)
{
@@ -2282,7 +2284,7 @@ static void vmbus_mmio_remove(void)
}
}
-static void vmbus_reserve_fb(void)
+static void __maybe_unused vmbus_reserve_fb(void)
{
resource_size_t start = 0, size;
struct pci_dev *pdev;
@@ -2442,6 +2444,7 @@ void vmbus_free_mmio(resource_size_t start, resource_size_t size)
}
EXPORT_SYMBOL_GPL(vmbus_free_mmio);
+#ifdef CONFIG_ACPI
static int vmbus_acpi_add(struct platform_device *pdev)
{
acpi_status result;
@@ -2494,10 +2497,47 @@ static int vmbus_acpi_add(struct platform_device *pdev)
vmbus_mmio_remove();
return ret_val;
}
+#endif
+
+static int vmbus_device_add(struct platform_device *pdev)
+{
+ struct resource **cur_res = &hyperv_mmio;
+ struct of_range range;
+ struct of_range_parser parser;
+ struct device_node *np = pdev->dev.of_node;
+ int ret;
+
+ hv_dev = &pdev->dev;
+
+ ret = of_range_parser_init(&parser, np);
+ if (ret)
+ return ret;
+
+ for_each_of_range(&parser, &range) {
+ struct resource *res;
+
+ res = kzalloc(sizeof(*res), GFP_ATOMIC);
+ if (!res)
+ return -ENOMEM;
+
+ res->name = "hyperv mmio";
+ res->flags = IORESOURCE_MEM | IORESOURCE_MEM_64;
+ res->start = range.cpu_addr;
+ res->end = range.cpu_addr + range.size;
+
+ *cur_res = res;
+ cur_res = &res->sibling;
+ }
+
+ return ret;
+}
static int vmbus_platform_driver_probe(struct platform_device *pdev)
{
+#ifdef CONFIG_ACPI
return vmbus_acpi_add(pdev);
+#endif
+ return vmbus_device_add(pdev);
}
static int vmbus_platform_driver_remove(struct platform_device *pdev)
@@ -2643,12 +2683,24 @@ static int vmbus_bus_resume(struct device *dev)
#define vmbus_bus_resume NULL
#endif /* CONFIG_PM_SLEEP */
+static const __maybe_unused struct of_device_id vmbus_of_match[] = {
+ {
+ .compatible = "microsoft,vmbus",
+ },
+ {
+ /* sentinel */
+ },
+};
+MODULE_DEVICE_TABLE(of, vmbus_of_match);
+
+#ifdef CONFIG_ACPI
static const struct acpi_device_id vmbus_acpi_device_ids[] = {
{"VMBUS", 0},
{"VMBus", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, vmbus_acpi_device_ids);
+#endif
/*
* Note: we must use the "no_irq" ops, otherwise hibernation can not work with
@@ -2677,6 +2729,7 @@ static struct platform_driver vmbus_platform_driver = {
.driver = {
.name = "vmbus",
.acpi_match_table = ACPI_PTR(vmbus_acpi_device_ids),
+ .of_match_table = of_match_ptr(vmbus_of_match),
.pm = &vmbus_bus_pm,
.probe_type = PROBE_FORCE_SYNCHRONOUS,
}
--
2.34.1
