Re: [PATCH v10 07/26] mailbox: Add Gunyah message queue mailbox

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 2/20/2023 5:59 AM, Srinivas Kandagatla wrote:


On 14/02/2023 21:23, Elliot Berman wrote:
Gunyah message queues are a unidirectional inter-VM pipe for messages up
to 1024 bytes. This driver supports pairing a receiver message queue and
a transmitter message queue to expose a single mailbox channel.

Signed-off-by: Elliot Berman <quic_eberman@xxxxxxxxxxx>
---
  Documentation/virt/gunyah/message-queue.rst |   8 +
  drivers/mailbox/Makefile                   |   2 +
  drivers/mailbox/gunyah-msgq.c               | 214 ++++++++++++++++++++
  include/linux/gunyah.h                      |  56 +++++
  4 files changed, 280 insertions(+)
  create mode 100644 drivers/mailbox/gunyah-msgq.c

diff --git a/Documentation/virt/gunyah/message-queue.rst b/Documentation/virt/gunyah/message-queue.rst
index 0667b3eb1ff9..082085e981e0 100644
--- a/Documentation/virt/gunyah/message-queue.rst
+++ b/Documentation/virt/gunyah/message-queue.rst
@@ -59,3 +59,11 @@ vIRQ: two TX message queues will have two vIRQs (and two capability IDs).         |               |         |                 | |               |         |               |         |                 | |               |         +---------------+         +-----------------+ +---------------+
+
+Gunyah message queues are exposed as mailboxes. To create the mailbox, create +a mbox_client and call `gh_msgq_init`. On receipt of the RX_READY interrupt, +all messages in the RX message queue are read and pushed via the `rx_callback`
+of the registered mbox_client.
+
+.. kernel-doc:: drivers/mailbox/gunyah-msgq.c
+   :identifiers: gh_msgq_init
diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
index fc9376117111..5f929bb55e9a 100644
--- a/drivers/mailbox/Makefile
+++ b/drivers/mailbox/Makefile
@@ -55,6 +55,8 @@ obj-$(CONFIG_MTK_CMDQ_MBOX)    += mtk-cmdq-mailbox.o
  obj-$(CONFIG_ZYNQMP_IPI_MBOX)    += zynqmp-ipi-mailbox.o
+obj-$(CONFIG_GUNYAH)        += gunyah-msgq.o

Why are we reusing CONFIG_GUNYAH Kconfig symbol for mailbox, why not CONFIG_GUNYAH_MBOX?


There was some previous discussion about this:

https://lore.kernel.org/all/2a7bb5f2-1286-b661-659a-a5037150eae8@xxxxxxxxxxx/

+
  obj-$(CONFIG_SUN6I_MSGBOX)    += sun6i-msgbox.o
  obj-$(CONFIG_SPRD_MBOX)       += sprd-mailbox.o
diff --git a/drivers/mailbox/gunyah-msgq.c b/drivers/mailbox/gunyah-msgq.c
new file mode 100644
index 000000000000..03ffaa30ce9b
--- /dev/null
+++ b/drivers/mailbox/gunyah-msgq.c
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/mailbox_controller.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/gunyah.h>
+#include <linux/printk.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/wait.h>

...

+/* Fired when message queue transitions from "full" to "space available" to send messages */
+static irqreturn_t gh_msgq_tx_irq_handler(int irq, void *data)
+{
+    struct gh_msgq *msgq = data;
+
+    mbox_chan_txdone(gh_msgq_chan(msgq), 0);
+
+    return IRQ_HANDLED;
+}
+
+/* Fired after sending message and hypercall told us there was more space available. */
+static void gh_msgq_txdone_tasklet(struct tasklet_struct *tasklet)

Tasklets have been long deprecated, consider using workqueues in this particular case.


Workqueues have higher latency and tasklets came as recommendation from Jassi. drivers/mailbox/imx-mailbox.c uses tasklets in the same way.

I did some quick unscientific measurements of ~1000x samples. The median latency for resource manager went from 25.5 us (tasklet) to 26 us (workqueue) (2% slower). The mean went from 28.7 us to 32.5 us (13% slower). Obviously, the outliers for workqueues were much more extreme.


+{
+    struct gh_msgq *msgq = container_of(tasklet, struct gh_msgq, txdone_tasklet);
+
+    mbox_chan_txdone(gh_msgq_chan(msgq), msgq->last_ret);
+}
+
+static int gh_msgq_send_data(struct mbox_chan *chan, void *data)
+{
..

+    tasklet_schedule(&msgq->txdone_tasklet);
+
+    return 0;
+}
+
+static struct mbox_chan_ops gh_msgq_ops = {
+    .send_data = gh_msgq_send_data,
+};
+
+/**
+ * gh_msgq_init() - Initialize a Gunyah message queue with an mbox_client
+ * @parent: optional, device parent used for the mailbox controller
+ * @msgq: Pointer to the gh_msgq to initialize
+ * @cl: A mailbox client to bind to the mailbox channel that the message queue creates
+ * @tx_ghrsc: optional, the transmission side of the message queue
+ * @rx_ghrsc: optional, the receiving side of the message queue
+ *
+ * At least one of tx_ghrsc and rx_ghrsc should be not NULL. Most message queue use cases come with + * a pair of message queues to facilitate bidirectional communication. When tx_ghrsc is set, + * the client can send messages with mbox_send_message(gh_msgq_chan(msgq), msg). When rx_ghrsc + * is set, the mbox_client should register an .rx_callback() and the message queue driver will + * push all available messages upon receiving the RX ready interrupt. The messages should be + * consumed or copied by the client right away as the gh_msgq_rx_data will be replaced/destroyed
+ * after the callback.
+ *
+ * Returns - 0 on success, negative otherwise
+ */
+int gh_msgq_init(struct device *parent, struct gh_msgq *msgq, struct mbox_client *cl, +             struct gunyah_resource *tx_ghrsc, struct gunyah_resource *rx_ghrsc)
+{
+    int ret;
+
+    /* Must have at least a tx_ghrsc or rx_ghrsc and that they are the right device types */
+    if ((!tx_ghrsc && !rx_ghrsc) ||
+        (tx_ghrsc && tx_ghrsc->type != GUNYAH_RESOURCE_TYPE_MSGQ_TX) ||
+        (rx_ghrsc && rx_ghrsc->type != GUNYAH_RESOURCE_TYPE_MSGQ_RX))
+        return -EINVAL;
+
+    if (gh_api_version() != GUNYAH_API_V1) {
+        pr_err("Unrecognized gunyah version: %u. Currently supported: %d\n",
dev_err(parent

would make this more useful


Done.

- Elliot



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux