Re: [PATCH V2 5/6] arm64: dts: qcom: ipq9574: Add RPM related nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 2/20/2023 8:06 PM, Konrad Dybcio wrote:


On 20.02.2023 14:53, Devi Priya wrote:
Hi Konrad,

Thanks for taking time to review the patch!
I appreciate your gratitude, but please don't toppost (a.k.a
don't reply in the first lines of the email), that's rather
frowned upon on LKML.

Sure, understood!

On 2/17/2023 8:20 PM, Konrad Dybcio wrote:


On 17.02.2023 15:20, Devi Priya wrote:
Add RPM Glink, RPM message RAM and SMPA1 regulator
nodes to support frequency scaling on IPQ9574

Signed-off-by: Devi Priya <quic_devipriy@xxxxxxxxxxx>
---
   Changes in V2:
     - Splitted the RPM and CPU Freq changes to individual patches
     - Moved the regulators node to Board DT
     - Dropped the regulator-always-on property
     - Updated the compatible in regulators node with the existing
       mp5496 compatible

   arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts | 11 +++++++++++
   arch/arm64/boot/dts/qcom/ipq9574.dtsi        | 17 +++++++++++++++++
   2 files changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
index 21b53f34ce84..8a6caaeb0c4b 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
@@ -57,6 +57,17 @@
       status = "okay";
   };
   +&rpm_requests {
+    regulators {
+        compatible = "qcom,rpm-mp5496-regulators";
+
+        ipq9574_s1: s1 {
+            regulator-min-microvolt = <587500>;
+            regulator-max-microvolt = <1075000>;
+        };
+    };
+};
This belongs in a separate patch.

Do you recommend to move this change to the below patch in the next spin?
[PATCH V2 6/6]arm64: dts: qcom: ipq9574: Add cpufreq support
Sounds good

Also, I think you missed a newline before &rpm_requests now that
I look at it.
Sure, will take care of that in V3

Konrad
+
   &sdhc_1 {
       pinctrl-0 = <&sdc_default_state>;
       pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index d20f3c7383f5..2f300cbab93e 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -133,6 +133,11 @@
           #size-cells = <2>;
           ranges;
   +        rpm_msg_ram: rpm@60000 {
Since this is a part of the MMIO region and not a part of DRAM,
we generally put this node under /soc with the compatible of
qcom,rpm-msg-ram and without no-map.

And the node name then should be sram@.
Sure, okay. Will update this in V3

+            reg = <0x0 0x00060000 0x0 0x6000>;
+            no-map;
+        };
+
           tz_region: tz@4a600000 {
               reg = <0x0 0x4a600000 0x0 0x400000>;
               no-map;
@@ -768,6 +773,18 @@
           };
       };
   +    rpm-glink {
Alphabetically this should come before /soc.
Okay

Konrad
+        compatible = "qcom,glink-rpm";
+        interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+        qcom,rpm-msg-ram = <&rpm_msg_ram>;
+        mboxes = <&apcs_glb 0>;
+
+        rpm_requests: glink-channel {
+            compatible = "qcom,rpm-ipq9574";
+            qcom,glink-channels = "rpm_requests";
+        };
+    };
+
       timer {
           compatible = "arm,armv8-timer";
           interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
Best Regards,
Devi Priya



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux