[PATCH v1 5/6] fpga: add PolarFire SoC Auto Update support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>

Add support for Auto Update reprogramming of the FPGA fabric on
PolarFire SoC.

Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
 drivers/fpga/Kconfig                 |   9 +
 drivers/fpga/Makefile                |   1 +
 drivers/fpga/microchip-auto-update.c | 495 +++++++++++++++++++++++++++
 3 files changed, 505 insertions(+)
 create mode 100644 drivers/fpga/microchip-auto-update.c

diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index 6ce143dafd04..0cdd6978a440 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -257,6 +257,15 @@ config FPGA_M10_BMC_SEC_UPDATE
 	  (BMC) and provides support for secure updates for the BMC image,
 	  the FPGA image, the Root Entry Hashes, etc.
 
+config FPGA_MGR_MICROCHIP_AUTO_UPDATE
+	tristate "Microchip PolarFire SoC AUTO UPDATE"
+	depends on POLARFIRE_SOC_SYS_CTRL
+	help
+	  FPGA manager driver support for reprogramming PolarFire SoC from
+	  within Linux, using the Auto Upgrade feature of the system controller.
+
+	  If built as a module, it will be called microchip-auto-update.
+
 config FPGA_MGR_MICROCHIP_SPI
 	tristate "Microchip Polarfire SPI FPGA manager"
 	depends on SPI
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index 72e554b4d2f7..a67903edf976 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_FPGA_MGR_XILINX_SPI)	+= xilinx-spi.o
 obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA)	+= zynq-fpga.o
 obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA)	+= zynqmp-fpga.o
 obj-$(CONFIG_FPGA_MGR_VERSAL_FPGA)	+= versal-fpga.o
+obj-$(CONFIG_FPGA_MGR_MICROCHIP_AUTO_UPDATE)	+= microchip-auto-update.o
 obj-$(CONFIG_FPGA_MGR_MICROCHIP_SPI)	+= microchip-spi.o
 obj-$(CONFIG_FPGA_MGR_LATTICE_SYSCONFIG)	+= lattice-sysconfig.o
 obj-$(CONFIG_FPGA_MGR_LATTICE_SYSCONFIG_SPI)	+= lattice-sysconfig-spi.o
diff --git a/drivers/fpga/microchip-auto-update.c b/drivers/fpga/microchip-auto-update.c
new file mode 100644
index 000000000000..d90085f86b8b
--- /dev/null
+++ b/drivers/fpga/microchip-auto-update.c
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Microchip Polarfire SoC "Auto Update" FPGA reprogramming.
+ *
+ * Documentation of this functionality is available in the "PolarFire® FPGA and
+ * PolarFire SoC FPGA Programming" User Guide.
+ *
+ * Copyright (c) 2022-2023 Microchip Corporation. All rights reserved.
+ *
+ * Author: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
+ */
+#include <linux/debugfs.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/math.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/of_device.h>
+#include <linux/sizes.h>
+
+#include <soc/microchip/mpfs.h>
+
+#define AUTO_UPDATE_DEFAULT_MBOX_OFFSET		0u
+#define AUTO_UPDATE_DEFAULT_RESP_OFFSET		0u
+
+#define AUTO_UPDATE_FEATURE_CMD_OPCODE		0x05u
+#define AUTO_UPDATE_FEATURE_CMD_DATA_SIZE	0u
+#define AUTO_UPDATE_FEATURE_RESP_SIZE		33u
+#define AUTO_UPDATE_FEATURE_CMD_DATA		NULL
+#define AUTO_UPDATE_FEATURE_ENABLED		BIT(5)
+
+#define AUTO_UPDATE_AUTHENTICATE_CMD_OPCODE	0x22u
+#define AUTO_UPDATE_AUTHENTICATE_CMD_DATA_SIZE	0u
+#define AUTO_UPDATE_AUTHENTICATE_RESP_SIZE	1u
+#define AUTO_UPDATE_AUTHENTICATE_CMD_DATA	NULL
+
+#define AUTO_UPDATE_PROGRAM_CMD_OPCODE		0x46u
+#define AUTO_UPDATE_PROGRAM_CMD_DATA_SIZE	0u
+#define AUTO_UPDATE_PROGRAM_RESP_SIZE		1u
+#define AUTO_UPDATE_PROGRAM_CMD_DATA		NULL
+
+/*
+ * SPI Flash layout example:
+ * |------------------------------| 0x0000000
+ * | 1 KiB                        |
+ * | SPI "directories"            |
+ * |------------------------------| 0x0000400
+ * | 1 MiB                        |
+ * | Reserved area                |
+ * | Used for bitstream info      |
+ * |------------------------------| 0x0100400
+ * | 20 MiB                       |
+ * | Golden Image                 |
+ * |------------------------------| 0x1500400
+ * | 20 MiB                       |
+ * | Auto Upgrade Image           |
+ * |------------------------------| 0x2900400
+ * | 20 MiB                       |
+ * | Reserved for multi-image IAP |
+ * | Unused for Auto Upgrade      |
+ * |------------------------------| 0x3D00400
+ * | ? B                          |
+ * | Unused                       |
+ * |------------------------------| 0x?
+ */
+#define AUTO_UPDATE_DIRECTORY_BASE	0u
+#define AUTO_UPDATE_DIRECTORY_WIDTH	4u
+#define AUTO_UPDATE_GOLDEN_INDEX	0u
+#define AUTO_UPDATE_UPGRADE_INDEX	1u
+#define AUTO_UPDATE_BLANK_INDEX		2u
+#define AUTO_UPDATE_GOLDEN_DIRECTORY	(AUTO_UPDATE_DIRECTORY_WIDTH * AUTO_UPDATE_GOLDEN_INDEX)
+#define AUTO_UPDATE_UPGRADE_DIRECTORY	(AUTO_UPDATE_DIRECTORY_WIDTH * AUTO_UPDATE_UPGRADE_INDEX)
+#define AUTO_UPDATE_BLANK_DIRECTORY	(AUTO_UPDATE_DIRECTORY_WIDTH * AUTO_UPDATE_BLANK_INDEX)
+#define AUTO_UPDATE_DIRECTORY_SIZE	SZ_1K
+#define AUTO_UPDATE_RESERVED_SIZE	SZ_1M
+#define AUTO_UPDATE_BITSTREAM_BASE	(AUTO_UPDATE_DIRECTORY_SIZE + AUTO_UPDATE_RESERVED_SIZE)
+
+struct mpfs_auto_update_config {
+	u8 feature_response_size;
+};
+
+struct mpfs_auto_update_priv {
+	struct mpfs_sys_controller *sys_controller;
+	struct device *dev;
+	struct fpga_region *region;
+	struct mpfs_auto_update_config *config;
+	struct mtd_info *flash;
+	struct dentry *debugfs_dir;
+};
+
+static struct device *mpfs_auto_update_debug_dev;
+
+static enum fpga_mgr_states mpfs_auto_update_state(struct fpga_manager *mgr)
+{
+	struct mpfs_auto_update_priv *priv = mgr->priv;
+	struct mpfs_mss_response *response;
+	struct mpfs_mss_msg *message;
+	u32 *response_msg;
+	int ret;
+	enum fpga_mgr_states rc = FPGA_MGR_STATE_WRITE_INIT_ERR;
+
+	response_msg = devm_kzalloc(priv->dev, AUTO_UPDATE_FEATURE_RESP_SIZE * sizeof(response_msg),
+				    GFP_KERNEL);
+	if (!response_msg)
+		return FPGA_MGR_STATE_WRITE_INIT_ERR;
+
+	response = devm_kzalloc(priv->dev, sizeof(struct mpfs_mss_response), GFP_KERNEL);
+	if (!response) {
+		rc = FPGA_MGR_STATE_WRITE_INIT_ERR;
+		goto free_response_msg;
+	}
+
+	message = devm_kzalloc(priv->dev, sizeof(struct mpfs_mss_msg), GFP_KERNEL);
+	if (!message) {
+		rc = FPGA_MGR_STATE_WRITE_INIT_ERR;
+		goto free_response;
+	}
+
+	/*
+	 * To verify that Auto Update is possible, the "Query Security Service
+	 * Request" is performed. Bit 5 of byte 1 is "UL_Auto Update" & if it is
+	 * set, Auto Update is not possible.
+	 * This service has no command data & does not overload mbox_offset.
+	 * The size of the response varies between PolarFire & PolarFire SoC.
+	 */
+	response->resp_msg = response_msg;
+	response->resp_size = AUTO_UPDATE_FEATURE_RESP_SIZE;
+	message->cmd_opcode = AUTO_UPDATE_FEATURE_CMD_OPCODE;
+	message->cmd_data_size = AUTO_UPDATE_FEATURE_CMD_DATA_SIZE;
+	message->response = response;
+	message->cmd_data = AUTO_UPDATE_FEATURE_CMD_DATA;
+	message->mbox_offset = AUTO_UPDATE_DEFAULT_MBOX_OFFSET;
+	message->resp_offset = AUTO_UPDATE_DEFAULT_RESP_OFFSET;
+
+	ret = mpfs_blocking_transaction(priv->sys_controller, message);
+	if (ret | response->resp_status) {
+		rc = FPGA_MGR_STATE_UNKNOWN;
+		goto free_message;
+	}
+
+	if (!(response_msg[1] & AUTO_UPDATE_FEATURE_ENABLED))
+		rc = FPGA_MGR_STATE_OPERATING;
+
+free_message:
+	devm_kfree(priv->dev, message);
+free_response:
+	devm_kfree(priv->dev, response);
+free_response_msg:
+	devm_kfree(priv->dev, response_msg);
+
+	return rc;
+}
+
+static int mpfs_auto_update_write_init(struct fpga_manager *mgr, struct fpga_image_info *info,
+				       const char *buf, size_t count)
+{
+	/*
+	 * Verifying the Golden Image is idealistic. It will be evaluated
+	 * against the currently programmed image and thus may fail - due to
+	 * either rollback protection (if its an older version than that in use)
+	 * or if the version is the same as that of the in-use image.
+	 * Extracting the information as to why a failure occurred is not
+	 * currently possible due to limitations of the system controller
+	 * driver. If those are fixed, verification of the Golden Image should
+	 * be added here.
+	 */
+	return 0;
+}
+
+static int mpfs_auto_update_write(struct fpga_manager *mgr, const char *buf, size_t count)
+{
+	/*
+	 * No parsing etc of the bitstream is required. The system controller
+	 * will do all of that itself - including verifying that the bitstream
+	 * is valid.
+	 */
+	struct mpfs_auto_update_priv *priv = mgr->priv;
+	struct erase_info erase;
+	char *buffer;
+	loff_t directory_address = AUTO_UPDATE_UPGRADE_DIRECTORY;
+	size_t bytes_written = 0, bytes_read = 0;
+	size_t erase_size = AUTO_UPDATE_DIRECTORY_SIZE;
+	size_t size_per_bitstream = 0;
+	u32 image_address;
+	int ret;
+
+	priv->flash = mpfs_sys_controller_get_flash(priv->sys_controller);
+	if (!priv->flash)
+		return -EIO;
+
+	erase_size = round_up(erase_size, (u64)priv->flash->erasesize);
+
+	/*
+	 * We need to calculate if we have enough space in the flash for the
+	 * new image.
+	 * First, chop off the first 1 KiB as it's reserved for the directory.
+	 * The 1 MiB reserved for design info needs to be ignored also.
+	 * All that remains is carved into 3 & rounded down to the erasesize.
+	 * If this is smaller than the image size, we abort.
+	 * There's also no need to consume more than 20 MiB per image.
+	 */
+	size_per_bitstream = priv->flash->size - SZ_1K - SZ_1M;
+	size_per_bitstream = round_down(size_per_bitstream / 3, erase_size);
+	if (size_per_bitstream > 20 * SZ_1M)
+		size_per_bitstream = 20 * SZ_1M;
+
+	if (size_per_bitstream < count) {
+		dev_err(priv->dev,
+			"flash device has insufficient capacity to store this bitstream\n");
+		return -EINVAL;
+	}
+
+	image_address = AUTO_UPDATE_BITSTREAM_BASE + AUTO_UPDATE_UPGRADE_INDEX * size_per_bitstream;
+
+	buffer = devm_kzalloc(priv->dev, erase_size, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	erase.addr = AUTO_UPDATE_DIRECTORY_BASE;
+	erase.len = erase_size;
+
+	/*
+	 * We need to write the "SPI DIRECTORY" to the first 1 KiB, telling
+	 * the system controller where to find the actual bitstream. Since
+	 * this is spi-nor, we have to read the first eraseblock, erase that
+	 * portion of the flash, modify the data and then write it back.
+	 */
+	ret = mtd_read(priv->flash, AUTO_UPDATE_DIRECTORY_BASE, erase_size, &bytes_read,
+		       (u_char *)buffer);
+	if (ret)
+		goto out;
+
+	if (bytes_read != erase_size) {
+		ret = -EIO;
+		goto out;
+	}
+
+	ret = mtd_erase(priv->flash, &erase);
+	if (ret)
+		goto out;
+
+	/*
+	 * Populate the image address and then zero out the next directory so
+	 * that the system controller doesn't complain if in "Single Image"
+	 * mode.
+	 */
+	memcpy(buffer + AUTO_UPDATE_UPGRADE_DIRECTORY, &image_address, AUTO_UPDATE_DIRECTORY_WIDTH);
+	memset(buffer + AUTO_UPDATE_BLANK_DIRECTORY, 0x0, AUTO_UPDATE_DIRECTORY_WIDTH);
+
+	dev_info(priv->dev, "Writing the image address (%x) to the flash directory (%llx)\n",
+		 image_address, directory_address);
+
+	ret = mtd_write(priv->flash, 0x0, erase_size, &bytes_written, (u_char *)buffer);
+	if (ret)
+		goto out;
+
+	if (bytes_written != erase_size) {
+		ret = -EIO;
+		goto out;
+	}
+
+	/*
+	 * Now the .spi image itself can be written to the flash. Preservation
+	 * of contents here is not important here, unlike the spi "directory"
+	 * which must be RMWed.
+	 */
+	erase.len = round_up(count, (size_t)priv->flash->erasesize);
+	erase.addr = image_address;
+
+	dev_info(priv->dev, "Erasing the flash at address (%x)\n", image_address);
+	ret = mtd_erase(priv->flash, &erase);
+	if (ret)
+		goto out;
+
+	dev_info(priv->dev, "Writing the image to the flash at address (%x)\n", image_address);
+	ret = mtd_write(priv->flash, (loff_t)image_address, count, &bytes_written, buf);
+	if (ret)
+		goto out;
+
+	if (bytes_written != count)
+		ret = -EIO;
+
+out:
+	devm_kfree(priv->dev, buffer);
+	return ret;
+}
+
+static int mpfs_auto_update_write_complete(struct fpga_manager *mgr, struct fpga_image_info *info)
+{
+	struct mpfs_auto_update_priv *priv = mgr->priv;
+	struct mpfs_mss_response *response;
+	struct mpfs_mss_msg *message;
+	u32 *response_msg;
+	int ret;
+
+	response_msg = devm_kzalloc(priv->dev, AUTO_UPDATE_FEATURE_RESP_SIZE * sizeof(response_msg),
+				    GFP_KERNEL);
+	if (!response_msg)
+		return -ENOMEM;
+
+	response = devm_kzalloc(priv->dev, sizeof(struct mpfs_mss_response), GFP_KERNEL);
+	if (!response) {
+		ret = -ENOMEM;
+		goto free_response_msg;
+	}
+
+	message = devm_kzalloc(priv->dev, sizeof(struct mpfs_mss_msg), GFP_KERNEL);
+	if (!message) {
+		ret = -ENOMEM;
+		goto free_response;
+	}
+
+	/*
+	 * The system controller can verify that an image in the flash is valid.
+	 * Rather than duplicate the check in this driver, call the relevant
+	 * service from the system controller instead.
+	 * This service has no command data and no response data. It overloads
+	 * mbox_offset with the image index in the flash's SPI directory where
+	 * the bitstream is located.
+	 */
+	response->resp_msg = response_msg;
+	response->resp_size = AUTO_UPDATE_AUTHENTICATE_RESP_SIZE;
+	message->cmd_opcode = AUTO_UPDATE_AUTHENTICATE_CMD_OPCODE;
+	message->cmd_data_size = AUTO_UPDATE_AUTHENTICATE_CMD_DATA_SIZE;
+	message->response = response;
+	message->cmd_data = AUTO_UPDATE_AUTHENTICATE_CMD_DATA;
+	message->mbox_offset = AUTO_UPDATE_UPGRADE_INDEX;
+	message->resp_offset = AUTO_UPDATE_DEFAULT_RESP_OFFSET;
+
+	dev_info(priv->dev, "Running verification of Upgrade Image\n");
+	ret = mpfs_blocking_transaction(priv->sys_controller, message);
+	if (ret | response->resp_status) {
+		dev_warn(priv->dev, "Verification of Upgrade Image failed!\n");
+		ret = ret ? ret : -EBADMSG;
+	}
+
+	dev_info(priv->dev, "Verification of Upgrade Image passed!\n");
+//	/*
+//	 * If the validation has passed, initiate Auto Update.
+//	 * This service has no command data and no response data. It overloads
+//	 * mbox_offset with the image index in the flash's SPI directory where
+//	 * the bitstream is located.
+//	 * Once we attempt Auto Update either:
+//	 * - it passes and the board reboots
+//	 * - it fails and the board reboots to recover
+//	 * - the system controller aborts and we exit "gracefully".
+//	 *   "gracefully" since there is no interrupt produced & it just times
+//	 *   out.
+//	 */
+//	response->resp_msg = response_msg;
+//	response->resp_size = AUTO_UPDATE_PROGRAM_RESP_SIZE;
+//	message->cmd_opcode = AUTO_UPDATE_PROGRAM_CMD_OPCODE;
+//	message->cmd_data_size = AUTO_UPDATE_PROGRAM_CMD_DATA_SIZE;
+//	message->response = response;
+//	message->cmd_data = AUTO_UPDATE_PROGRAM_CMD_DATA;
+//	message->mbox_offset = 0; //field is ignored
+//	message->resp_offset = AUTO_UPDATE_DEFAULT_RESP_OFFSET;
+//
+//	dev_info(priv->dev, "Running Auto Update command\n");
+//	ret = mpfs_blocking_transaction(priv->sys_controller, message);
+//	if (ret && ret != -ETIMEDOUT)
+//		goto out;
+//
+//	/* *remove this for auto update*
+//	 * This return 0 is dead code. Either the Auto Update will fail, or it will pass
+//	 * & the FPGA will be rebooted in which case mpfs_blocking_transaction()
+//	 * will never return and Linux will die.
+//	 */
+//	return 0;
+
+	devm_kfree(priv->dev, message);
+free_response:
+	devm_kfree(priv->dev, response);
+free_response_msg:
+	devm_kfree(priv->dev, response_msg);
+
+	return ret;
+}
+
+static const struct fpga_manager_ops mpfs_auto_update_ops = {
+	.state = mpfs_auto_update_state,
+	.write_init = mpfs_auto_update_write_init,
+	.write = mpfs_auto_update_write,
+	.write_complete = mpfs_auto_update_write_complete,
+};
+
+static int mpfs_auto_update_run(struct device *dev)
+{
+	struct fpga_manager *mgr;
+	struct fpga_image_info *info;
+	int ret;
+
+	mgr = fpga_mgr_get(dev);
+	info = fpga_image_info_alloc(dev);
+
+	info->firmware_name = devm_kstrdup(dev, "mpfs_bitstream.spi", GFP_KERNEL);
+
+	ret = fpga_mgr_lock(mgr);
+	if (ret)
+		goto free_info;
+
+	ret = fpga_mgr_load(mgr, info);
+	if (ret) {
+		dev_err(dev, "Failed to write the bitstream\n");
+		goto unlock_mgr;
+	}
+
+unlock_mgr:
+	fpga_mgr_unlock(mgr);
+free_info:
+	fpga_image_info_free(info);
+	fpga_mgr_put(mgr);
+
+	return ret;
+}
+
+static ssize_t mpfs_auto_update_exec(struct file *file, const char __user *data, size_t count,
+				     loff_t *ppos)
+{
+	int ret;
+
+	ret = mpfs_auto_update_run(mpfs_auto_update_debug_dev);
+	if (ret)
+		dev_err_probe(mpfs_auto_update_debug_dev, ret, "Auto Update failed");
+
+	return count;
+}
+
+static const struct file_operations mpfs_auto_update_fops = {
+	.owner = THIS_MODULE,
+	.open = simple_open,
+	.write = mpfs_auto_update_exec
+};
+
+static int mpfs_auto_update_debugfs_setup(struct mpfs_auto_update_priv *priv)
+{
+	priv->debugfs_dir = debugfs_create_dir("fpga", NULL);
+
+	if(IS_ERR(priv->debugfs_dir))
+		return PTR_ERR(priv->debugfs_dir);
+
+	debugfs_create_file("microchip_exec_update", 0200, priv->debugfs_dir, NULL,
+			    &mpfs_auto_update_fops);
+
+	return 0;
+}
+
+static int mpfs_auto_update_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mpfs_auto_update_priv *priv;
+	struct fpga_manager *mgr;
+	enum fpga_mgr_states state;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->sys_controller = mpfs_sys_controller_get(dev);
+	if (IS_ERR(priv->sys_controller))
+		return dev_err_probe(dev, PTR_ERR(priv->sys_controller),
+				     "Could not register as a sub device of the system controller\n");
+
+	priv->dev = dev;
+	platform_set_drvdata(pdev, priv);
+
+	mgr = devm_fpga_mgr_register(dev, "Microchip MPFS Auto Update FPGA Manager",
+				     &mpfs_auto_update_ops, priv);
+	if (IS_ERR(mgr))
+		return dev_err_probe(dev, PTR_ERR(mgr), "Could not register FPGA manager.\n");
+
+	state = mpfs_auto_update_state(mgr);
+	if (state != FPGA_MGR_STATE_OPERATING)
+		return -EIO;
+
+	ret = mpfs_auto_update_debugfs_setup(priv);
+	if (ret && ret != -ENODEV)
+		return ret;
+
+	mpfs_auto_update_debug_dev = priv->dev;
+
+	return 0;
+}
+
+static struct platform_driver mpfs_auto_update_driver = {
+	.driver = {
+		.name = "mpfs-auto-update",
+	},
+	.probe = mpfs_auto_update_probe,
+};
+module_platform_driver(mpfs_auto_update_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Conor Dooley <conor.dooley@xxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("PolarFire SoC Auto Update FPGA reprogramming");
-- 
2.39.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux