Add the APCS, A53 PLL, cpu-opp-table nodes to bump the CPU frequency above 800MHz. Signed-off-by: Kathiravan T <quic_kathirav@xxxxxxxxxxx> --- Changes in V3: - Sort the opp-table-cpu node Changes in V2: - No changes arch/arm64/boot/dts/qcom/ipq5332.dtsi | 37 +++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi index a2ed54264d5c..4bf8c01721d6 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -5,6 +5,7 @@ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. */ +#include <dt-bindings/clock/qcom,apss-ipq.h> #include <dt-bindings/clock/qcom,ipq5332-gcc.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -35,6 +36,8 @@ reg = <0x0>; enable-method = "psci"; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; }; CPU1: cpu@1 { @@ -43,6 +46,8 @@ reg = <0x1>; enable-method = "psci"; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; }; CPU2: cpu@2 { @@ -51,6 +56,8 @@ reg = <0x2>; enable-method = "psci"; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; }; CPU3: cpu@3 { @@ -59,6 +66,8 @@ reg = <0x3>; enable-method = "psci"; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; }; L2_0: l2-cache { @@ -79,6 +88,16 @@ reg = <0x0 0x40000000 0x0 0x0>; }; + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-1488000000 { + opp-hz = /bits/ 64 <1488000000>; + clock-latency-ns = <200000>; + }; + }; + pmu { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; @@ -194,6 +213,24 @@ }; }; + apcs_glb: mailbox@b111000 { + compatible = "qcom,ipq5332-apcs-apps-global", + "qcom,ipq6018-apcs-apps-global"; + reg = <0x0b111000 0x1000>; + #clock-cells = <1>; + clocks = <&a53pll>, <&xo_board>; + clock-names = "pll", "xo"; + #mbox-cells = <1>; + }; + + a53pll: clock@b116000 { + compatible = "qcom,ipq5332-a53pll"; + reg = <0x0b116000 0x40>; + #clock-cells = <0>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + timer@b120000 { compatible = "arm,armv7-timer-mem"; reg = <0x0b120000 0x1000>; -- 2.17.1