Convert the Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI CSIS) bindings to DT schema. Changes during conversion - adjust to existing DTS and Linux driver: 1. Add phys and power-domains. 2. Move samsung,csis-wclk property to the endpoint node. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> --- Changes since v2: 1. Add Rb tag. 2. Move size-cells next to address-cells. --- .../media/samsung,exynos4210-csis.yaml | 170 ++++++++++++++++++ .../bindings/media/samsung-mipi-csis.txt | 81 --------- MAINTAINERS | 1 + 3 files changed, 171 insertions(+), 81 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml delete mode 100644 Documentation/devicetree/bindings/media/samsung-mipi-csis.txt diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml new file mode 100644 index 000000000000..dd6cc7ac1f7c --- /dev/null +++ b/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml @@ -0,0 +1,170 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/samsung,exynos4210-csis.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI CSIS) + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> + - Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx> + +properties: + compatible: + enum: + - samsung,s5pv210-csis + - samsung,exynos4210-csis + - samsung,exynos4212-csis + - samsung,exynos5250-csis + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + bus-width: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 4] + description: + Number of data lines supported. + + clocks: + maxItems: 2 + + clock-names: + items: + - const: csis + - const: sclk_csis + + clock-frequency: + default: 166000000 + description: + The IP's main (system bus) clock frequency in Hz. + + interrupts: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + items: + - const: csis + + power-domains: + maxItems: 1 + + vddio-supply: + description: MIPI CSIS I/O and PLL voltage supply (e.g. 1.8V). + + vddcore-supply: + description: MIPI CSIS Core voltage supply (e.g. 1.1V). + +patternProperties: + "^port@[34]$": + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + description: + Camera input port. + + properties: + reg: + enum: [3, 4] + + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + samsung,csis-hs-settle: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Differential receiver (HS-RX) settle time. + + samsung,csis-wclk: + type: boolean + description: + CSI-2 wrapper clock selection. If this property is present external clock + from CMU will be used, or the bus clock if it's not specified. + + required: + - data-lanes + + required: + - reg + +required: + - compatible + - reg + - bus-width + - clocks + - clock-names + - interrupts + - vddio-supply + - vddcore-supply + +anyOf: + - required: + - port@3 + - required: + - port@4 + +allOf: + - if: + required: + - samsung,isp-wb + then: + required: + - samsung,sysreg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + csis@11890000 { + compatible = "samsung,exynos4210-csis"; + reg = <0x11890000 0x4000>; + clocks = <&clock CLK_CSIS1>, + <&clock CLK_SCLK_CSIS1>; + clock-names = "csis", "sclk_csis"; + assigned-clocks = <&clock CLK_MOUT_CSIS1>, + <&clock CLK_SCLK_CSIS1>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; + + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + + bus-width = <2>; + power-domains = <&pd_cam>; + phys = <&mipi_phy 2>; + phy-names = "csis"; + + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + + #address-cells = <1>; + #size-cells = <0>; + + /* Camera D (4) MIPI CSI-2 (CSIS1) */ + port@4 { + reg = <4>; + + endpoint { + remote-endpoint = <&is_s5k6a3_ep>; + data-lanes = <1>; + samsung,csis-hs-settle = <18>; + samsung,csis-wclk; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt b/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt deleted file mode 100644 index a4149c9434ea..000000000000 --- a/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt +++ /dev/null @@ -1,81 +0,0 @@ -Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI CSIS) -------------------------------------------------------------- - -Required properties: - -- compatible : "samsung,s5pv210-csis" for S5PV210 (S5PC110), - "samsung,exynos4210-csis" for Exynos4210 (S5PC210), - "samsung,exynos4212-csis" for Exynos4212/Exynos4412, - "samsung,exynos5250-csis" for Exynos5250; -- reg : offset and length of the register set for the device; -- interrupts : should contain MIPI CSIS interrupt; the format of the - interrupt specifier depends on the interrupt controller; -- bus-width : maximum number of data lanes supported (SoC specific); -- vddio-supply : MIPI CSIS I/O and PLL voltage supply (e.g. 1.8V); -- vddcore-supply : MIPI CSIS Core voltage supply (e.g. 1.1V); -- clocks : list of clock specifiers, corresponding to entries in - clock-names property; -- clock-names : must contain "csis", "sclk_csis" entries, matching entries - in the clocks property. - -Optional properties: - -- clock-frequency : The IP's main (system bus) clock frequency in Hz, default - value when this property is not specified is 166 MHz; -- samsung,csis-wclk : CSI-2 wrapper clock selection. If this property is present - external clock from CMU will be used, or the bus clock if - if it's not specified. - -The device node should contain one 'port' child node with one child 'endpoint' -node, according to the bindings defined in Documentation/devicetree/bindings/ -media/video-interfaces.txt. The following are properties specific to those nodes. - -port node ---------- - -- reg : (required) must be 3 for camera C input (CSIS0) or 4 for - camera D input (CSIS1); - -endpoint node -------------- - -- data-lanes : (required) an array specifying active physical MIPI-CSI2 - data input lanes and their mapping to logical lanes; the - array's content is unused, only its length is meaningful; - -- samsung,csis-hs-settle : (optional) differential receiver (HS-RX) settle time; - - -Example: - - reg0: regulator@0 { - }; - - reg1: regulator@1 { - }; - -/* SoC properties */ - - csis_0: csis@11880000 { - compatible = "samsung,exynos4210-csis"; - reg = <0x11880000 0x1000>; - interrupts = <0 78 0>; - #address-cells = <1>; - #size-cells = <0>; - }; - -/* Board properties */ - - csis_0: csis@11880000 { - clock-frequency = <166000000>; - vddio-supply = <®0>; - vddcore-supply = <®1>; - port { - reg = <3>; /* 3 - CSIS0, 4 - CSIS1 */ - csis0_ep: endpoint { - remote-endpoint = <...>; - data-lanes = <1>, <2>; - samsung,csis-hs-settle = <12>; - }; - }; - }; diff --git a/MAINTAINERS b/MAINTAINERS index 57d1d6ecb33d..0882e304c8f9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18465,6 +18465,7 @@ M: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx> L: linux-media@xxxxxxxxxxxxxxx S: Supported Q: https://patchwork.linuxtv.org/project/linux-media/list/ +F: Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml F: drivers/media/platform/samsung/exynos4-is/ SAMSUNG SOC CLOCK DRIVERS -- 2.34.1
