On Thu, 16 Feb 2023 15:41:52 +0800, Jeremy Kerr wrote: > Add a devicetree binding for the ast2600 i3c controller hardware. This > is heavily based on the designware i3c core, plus a reset facility > and two platform-specific properties: > > - sda-pullup-ohms: to specify the value of the configurable pullup > resistors on the SDA line > > - aspeed,global-regs: to reference the (ast2600-specific) i3c global > register block, and the device index to use within it. > > Signed-off-by: Jeremy Kerr <jk@xxxxxxxxxxxxxxxxxxxx> > > --- > changes from RFC: > - add vendor prefix to global-regs properties > - add item description on global-regs property > - drop global reg node from example > --- > .../bindings/i3c/aspeed,ast2600-i3c.yaml | 73 +++++++++++++++++++ > 1 file changed, 73 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Error: Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.example.dts:30.31-32 syntax error FATAL ERROR: Unable to parse input tree make[1]: *** [scripts/Makefile.lib:434: Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.example.dtb] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1508: dt_binding_check] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/82d750f53df622d8986e9a07053c7ee27dee61a2.1676532146.git.jk@xxxxxxxxxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
