Add support for the time slot assigner (TSA) available in some PowerQUICC SoC such as MPC885 or MPC866. Signed-off-by: Herve Codina <herve.codina@xxxxxxxxxxx> --- .../bindings/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml | 234 ++++++++++++++++++ include/dt-bindings/soc/fsl,tsa.h | 13 + 2 files changed, 247 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml create mode 100644 include/dt-bindings/soc/fsl,tsa.h diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml new file mode 100644 index 000000000000..bcd03f89780e --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml @@ -0,0 +1,234 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PowerQUICC CPM Time-slot assigner (TSA) controller + +maintainers: + - Herve Codina <herve.codina@xxxxxxxxxxx> + +description: + The TSA is the time-slot assigner that can be found on some PowerQUICC SoC. + Its purpose is to route some TDM time-slots to other internal serial + controllers. + +properties: + compatible: + items: + - enum: + - fsl,mpc885-tsa + - fsl,mpc866-tsa + - const: fsl,cpm1-tsa + + reg: + items: + - description: SI (Serial Interface) register base + - description: SI RAM base + + reg-names: + items: + - const: si_regs + - const: si_ram + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#fsl,serial-cells': + $ref: /schemas/types.yaml#/definitions/uint32 + const: 1 + description: + TSA consumers that use a phandle to TSA need to pass the serial identifier + with this phandle (defined in dt-bindings/soc/fsl,tsa.h). + For instance "fsl,tsa-serial = <&tsa FSL_CPM_TSA_SCC4>;". + +patternProperties: + '^tdm@[0-1]$': + description: + The TDM managed by this controller + type: object + + additionalProperties: false + + properties: + reg: + minimum: 0 + maximum: 1 + description: + The TDM number for this TDM, 0 for TDMa and 1 for TDMb + + fsl,common-rxtx-pins: + $ref: /schemas/types.yaml#/definitions/flag + description: + The hardware can use four dedicated pins for Tx clock, Tx sync, Rx + clock and Rx sync or use only two pins, Tx/Rx clock and Tx/Rx sync. + Without the 'fsl,common-rxtx-pins' property, the four pins are used. + With the 'fsl,common-rxtx-pins' property, two pins are used. + + clocks: + minItems: 2 + items: + - description: External clock connected to L1RSYNC pin + - description: External clock connected to L1RCLK pin + - description: External clock connected to L1TSYNC pin + - description: External clock connected to L1TCLK pin + clock-names: + minItems: 2 + items: + - const: l1rsync + - const: l1rclk + - const: l1tsync + - const: l1tclk + + fsl,diagnostic-mode: + $ref: /schemas/types.yaml#/definitions/string + enum: [disabled, echo, internal-loopback, control-loopback] + default: disabled + description: | + The diagnostic mode can be used to diagnose some communication issues. + It should not be set (or set to 'disabled') when diagnostic is not + needed. + Diagnostic mode: + - disabled: + Diagnostic disabled (ie. normal operation) + - echo: + Automatic echo. Rx data is resent on Tx. + - internal-loopback: + The TDM transmitter is connected to the receiver. Data appears + on Tx pin. + - control-loopback: + The TDM transmitter is connected to the receiver. The Tx pin is + disconnected. + + fsl,rx-frame-sync-delay-bits: + enum: [0, 1, 2, 3] + default: 0 + description: | + Receive frame sync delay in number of bits. + Indicates the delay between the Rx sync and the first bit of the Rx + frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay. + + fsl,tx-frame-sync-delay-bits: + enum: [0, 1, 2, 3] + default: 0 + description: | + Transmit frame sync delay in number of bits. + Indicates the delay between the Tx sync and the first bit of the Tx + frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay. + + fsl,clock-falling-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: + Data is sent on falling edge of the clock (and received on the rising + edge). If 'clock-falling-edge' is not present, data is sent on the + rising edge (and received on the falling edge). + + fsl,fsync-rising-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: + Frame sync pulses are sampled with the rising edge of the channel + clock. If 'fsync-rising-edge' is not present, pulses are sampled with + the falling edge. + + fsl,double-speed-clock: + $ref: /schemas/types.yaml#/definitions/flag + description: + The channel clock is twice the data rate. + + patternProperties: + '^fsl,[rt]x-ts-routes$': + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + A list of tuple that indicates the Tx or Rx time-slots routes. + items: + items: + - description: + The number of time-slots + minimum: 1 + maximum: 64 + - description: | + The source (Tx) or destination (Rx) serial interface + (dt-bindings/soc/fsl,tsa.h defines these values) + - 0: No destination + - 1: SCC2 + - 2: SCC3 + - 3: SCC4 + - 4: SMC1 + - 5: SMC2 + enum: [0, 1, 2, 3, 4, 5] + minItems: 1 + maxItems: 64 + + allOf: + # If fsl,common-rxtx-pins is present, only 2 clocks are needed. + # Else, the 4 clocks must be present. + - if: + required: + - fsl,common-rxtx-pins + then: + properties: + clocks: + maxItems: 2 + clock-names: + maxItems: 2 + else: + properties: + clocks: + minItems: 4 + clock-names: + minItems: 4 + + required: + - reg + - clocks + - clock-names + +required: + - compatible + - reg + - reg-names + - '#address-cells' + - '#size-cells' + - '#fsl,serial-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/fsl,tsa.h> + + tsa@ae0 { + compatible = "fsl,mpc885-tsa", "fsl,cpm1-tsa"; + reg = <0xae0 0x10>, + <0xc00 0x200>; + reg-names = "si_regs", "si_ram"; + + #address-cells = <1>; + #size-cells = <0>; + #fsl,serial-cells = <1>; + + tdm@0 { + /* TDMa */ + reg = <0>; + + clocks = <&clk_l1rsynca>, <&clk_l1rclka>; + clock-names = "l1rsync", "l1rclk"; + + fsl,common-rxtx-pins; + fsl,fsync-rising-edge; + + fsl,tx-ts-routes = < 2 0 >, /* TS 0..1 */ + < 24 FSL_CPM_TSA_SCC4 >, /* TS 2..25 */ + < 1 0 >, /* TS 26 */ + < 5 FSL_CPM_TSA_SCC3 >; /* TS 27..31 */ + + fsl,rx-ts-routes = < 2 0 >, /* TS 0..1 */ + < 24 FSL_CPM_TSA_SCC4 >, /* 2..25 */ + < 1 0 >, /* TS 26 */ + < 5 FSL_CPM_TSA_SCC3 >; /* TS 27..31 */ + }; + }; diff --git a/include/dt-bindings/soc/fsl,tsa.h b/include/dt-bindings/soc/fsl,tsa.h new file mode 100644 index 000000000000..2cc44e867dbe --- /dev/null +++ b/include/dt-bindings/soc/fsl,tsa.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ + +#ifndef __DT_BINDINGS_SOC_FSL_TSA_H +#define __DT_BINDINGS_SOC_FSL_TSA_H + +#define FSL_CPM_TSA_NU 0 /* Pseuso Cell Id for not used item */ +#define FSL_CPM_TSA_SCC2 1 +#define FSL_CPM_TSA_SCC3 2 +#define FSL_CPM_TSA_SCC4 3 +#define FSL_CPM_TSA_SMC1 4 +#define FSL_CPM_TSA_SMC2 5 + +#endif -- 2.39.1
