RE: [PATCH v9 6/8] PCI: rcar-gen4: Add R-Car Gen4 PCIe Host support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Serge,

> From: Serge Semin, Sent: Thursday, February 16, 2023 3:33 AM
> 
> On Fri, Feb 10, 2023 at 10:49:15PM +0900, Yoshihiro Shimoda wrote:
> > Add R-Car Gen4 PCIe Host support. This controller is based on
> > Synopsys DesignWare PCIe.
> >
> > This controller doesn't support MSI-X interrupt. So, introduce
> > no_msix flag in struct dw_pcie_host_ops to clear MSI_FLAG_PCI_MSIX
> > from dw_pcie_msi_domain_info.
> >
> 
> > Note that this controller on R-Car S4-8 has an unexpected register
> > value on the dbi+0x97b register. So, add a new capability flag
> > which would force the unrolled eDMA mapping for the problematic
> > device, as suggested by Serge Semin.
> 
> Please move the noted fix to a separate pre-requisite patch seeing your
> update depends on it. Thus this patch will be a bit simpler to review
> with no harm to the changes atomicity.

There is other patch though, I think Lorenzo prefers non separated patch:
https://lore.kernel.org/all/Y245ZtqqqelXif+Y@lpieralisi/

But, Lorenzo, what do you think?

> >
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> > ---
> >  drivers/pci/controller/dwc/Kconfig            |   9 +
> >  drivers/pci/controller/dwc/Makefile           |   2 +
> >  .../pci/controller/dwc/pcie-designware-host.c |   3 +
> >  drivers/pci/controller/dwc/pcie-designware.c  |   8 +-
> >  drivers/pci/controller/dwc/pcie-designware.h  |   6 +-
> >  .../pci/controller/dwc/pcie-rcar-gen4-host.c  | 165 +++++++++++++++++
> >  drivers/pci/controller/dwc/pcie-rcar-gen4.c   | 166 ++++++++++++++++++
> >  drivers/pci/controller/dwc/pcie-rcar-gen4.h   |  63 +++++++
> >  8 files changed, 419 insertions(+), 3 deletions(-)
> >  create mode 100644 drivers/pci/controller/dwc/pcie-rcar-gen4-host.c
> >  create mode 100644 drivers/pci/controller/dwc/pcie-rcar-gen4.c
> >  create mode 100644 drivers/pci/controller/dwc/pcie-rcar-gen4.h
> >
> > diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> > index 434f6a4f4041..94805ec31a8f 100644
> > --- a/drivers/pci/controller/dwc/Kconfig
> > +++ b/drivers/pci/controller/dwc/Kconfig
> > @@ -414,4 +414,13 @@ config PCIE_FU740
> >  	  Say Y here if you want PCIe controller support for the SiFive
> >  	  FU740.
> >
> > +config PCIE_RCAR_GEN4
> > +	tristate "Renesas R-Car Gen4 PCIe Host controller"
> > +	depends on ARCH_RENESAS || COMPILE_TEST
> > +	depends on PCI_MSI
> > +	select PCIE_DW_HOST
> > +	help
> > +	  Say Y here if you want PCIe host controller support on R-Car Gen4 SoCs.
> > +	  This uses the DesignWare core.
> > +
> >  endmenu
> > diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
> > index bf5c311875a1..486cf706b53d 100644
> > --- a/drivers/pci/controller/dwc/Makefile
> > +++ b/drivers/pci/controller/dwc/Makefile
> > @@ -26,6 +26,8 @@ obj-$(CONFIG_PCIE_TEGRA194) += pcie-tegra194.o
> >  obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
> >  obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
> >  obj-$(CONFIG_PCIE_VISCONTI_HOST) += pcie-visconti.o
> > +pcie-rcar-gen4-host-drv-objs := pcie-rcar-gen4.o pcie-rcar-gen4-host.o
> > +obj-$(CONFIG_PCIE_RCAR_GEN4) += pcie-rcar-gen4-host-drv.o
> >
> >  # The following drivers are for devices that use the generic ACPI
> >  # pci_root.c driver but don't support standard ECAM config access.
> > diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> > index 9952057c8819..5aefeec15c9b 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> > @@ -242,6 +242,9 @@ int dw_pcie_allocate_domains(struct dw_pcie_rp *pp)
> >
> >  	irq_domain_update_bus_token(pp->irq_domain, DOMAIN_BUS_NEXUS);
> >
> 
> > +	if (pp->no_msix)
> > +		dw_pcie_msi_domain_info.flags &= ~MSI_FLAG_PCI_MSIX;
> 
> Changing static data field in the probe path doesn't seem like
> correct. Is it really that necessary to clear out that flag?

I didn't investigate the detail, but even if clearing this flag
disappeared, it seemed to work.

> The rest
> of the LLDDs don't seem to be bothered with that (mine included). On
> the other hand it seems to me that the iMSI-RX engine doesn't really
> support true MSI-X messages. It always stick to a single base address
> with up to 256 IRQs in total and up to 32 IRQs per function. Do you
> suggest to drop that flag then for all DW PCIe hosts or just for ones
> with iMSI-RX engine in-use or just forget about it?

I assumed almost all controller supported MSI-X, so that I suggested
to drop the MSI_FLAG_PCI_MSIX flag if needed.

> @Rob, @Bjorn?
> 
> > +
> >  	pp->msi_domain = pci_msi_create_irq_domain(fwnode,
> >  						   &dw_pcie_msi_domain_info,
> >  						   pp->irq_domain);
> > diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> > index b4315cf84340..7d649ba387f8 100644
> 
> > --- a/drivers/pci/controller/dwc/pcie-designware.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware.c
> > @@ -847,8 +847,14 @@ static int dw_pcie_edma_find_chip(struct dw_pcie *pci)
> >  	 * Indirect eDMA CSRs access has been completely removed since v5.40a
> >  	 * thus no space is now reserved for the eDMA channels viewport and
> >  	 * former DMA CTRL register is no longer fixed to FFs.
> > +	 *
> > +	 * Note some devices for unknown reason may have zeros in the eDMA CTRL
> > +	 * register even though the HW-manual explicitly states there must FFs
> > +	 * if the unrolled mapping is enabled. For such cases the low-level
> > +	 * drivers are supposed to manually activate the unrolled mapping to
> > +	 * bypass the auto-detection procedure.
> >  	 */
> > -	if (dw_pcie_ver_is_ge(pci, 540A))
> > +	if (dw_pcie_ver_is_ge(pci, 540A) || dw_pcie_cap_is(pci, EDMA_UNROLL))
> >  		val = 0xFFFFFFFF;
> >  	else
> >  		val = dw_pcie_readl_dbi(pci, PCIE_DMA_VIEWPORT_BASE + PCIE_DMA_CTRL);
> 
> As I suggested in the head of this message please move this to a
> separate pre-requisite patch.

I would like to know Lorenzo's preference.

> > diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> > index 1a6e7e9489ee..1b1af514b849 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware.h
> > +++ b/drivers/pci/controller/dwc/pcie-designware.h
> > @@ -51,8 +51,9 @@
> >
> >  /* DWC PCIe controller capabilities */
> >  #define DW_PCIE_CAP_REQ_RES		0
> 
> > -#define DW_PCIE_CAP_IATU_UNROLL		1
> > -#define DW_PCIE_CAP_CDM_CHECK		2
> > +#define DW_PCIE_CAP_EDMA_UNROLL		1
> > +#define DW_PCIE_CAP_IATU_UNROLL		2
> > +#define DW_PCIE_CAP_CDM_CHECK		3
> 
> ditto
> 
> >
> >  #define dw_pcie_cap_is(_pci, _cap) \
> >  	test_bit(DW_PCIE_CAP_ ## _cap, &(_pci)->caps)
> > @@ -303,6 +304,7 @@ struct dw_pcie_host_ops {
> >  struct dw_pcie_rp {
> >  	bool			has_msi_ctrl:1;
> >  	bool			cfg0_io_shared:1;
> > +	bool			no_msix:1;
> >  	u64			cfg0_base;
> >  	void __iomem		*va_cfg0_base;
> >  	u32			cfg0_size;
> > diff --git a/drivers/pci/controller/dwc/pcie-rcar-gen4-host.c b/drivers/pci/controller/dwc/pcie-rcar-gen4-host.c
> > new file mode 100644
> > index 000000000000..d60f4895ffe9
> > --- /dev/null
> > +++ b/drivers/pci/controller/dwc/pcie-rcar-gen4-host.c
> > @@ -0,0 +1,165 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * PCIe host controller driver for Renesas R-Car Gen4 Series SoCs
> > + * Copyright (C) 2022-2023 Renesas Electronics Corporation
> > + */
> > +
> > +#include <linux/interrupt.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/pci.h>
> > +#include <linux/platform_device.h>
> > +
> > +#include "pcie-rcar-gen4.h"
> > +#include "pcie-designware.h"
> > +
> > +static int rcar_gen4_pcie_host_init(struct dw_pcie_rp *pp)
> > +{
> > +	struct dw_pcie *dw = to_dw_pcie_from_pp(pp);
> > +	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
> > +	int ret;
> > +	u32 val;
> > +
> > +	ret = rcar_gen4_pcie_set_device_type(rcar, true, dw->num_lanes);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	dw_pcie_dbi_ro_wr_en(dw);
> > +
> > +	rcar_gen4_pcie_disable_bar(dw, BAR0MASKF);
> > +	rcar_gen4_pcie_disable_bar(dw, BAR1MASKF);
> > +
> > +	dw_pcie_dbi_ro_wr_dis(dw);
> > +
> > +	if (IS_ENABLED(CONFIG_PCI_MSI)) {
> > +		/* Enable MSI interrupt signal */
> > +		val = readl(rcar->base + PCIEINTSTS0EN);
> > +		val |= MSI_CTRL_INT;
> > +		writel(val, rcar->base + PCIEINTSTS0EN);
> > +	}
> > +
> > +	gpiod_set_value_cansleep(dw->pe_rst, 0);
> > +
> 
> > +	dw_pcie_setup_rc(pp);
> > +
> > +	dw_pcie_dbi_ro_wr_en(dw);
> > +	rcar_gen4_pcie_set_max_link_width(dw, dw->num_lanes);
> > +	dw_pcie_dbi_ro_wr_dis(dw);
> > +
> > +	if (!dw_pcie_link_up(dw)) {
> > +		ret = dw->ops->start_link(dw);
> > +		if (ret)
> > +			return ret;
> > +	}
> > +
> > +	/* Ignore errors, the link may come up later */
> > +	if (dw_pcie_wait_for_link(dw))
> > +		dev_info(dw->dev, "PCIe link down\n");
> 
> This whole procedure is done in the dw_pcie_host_init() method (@Rob
> already noted that a bit earlier). The only exception is the
> rcar_gen4_pcie_set_max_link_width() method, which I suggest to move
> the generic code (see further for more details).

I investigated this and then I found they can be just removed.
# This is related to the following patch. After I applied the following,
# I can remove the above codes.
# https://lore.kernel.org/linux-pci/20230216092012.3256440-1-yoshihiro.shimoda.uh@xxxxxxxxxxx/

> > +
> > +	return 0;
> > +}
> > +
> > +static const struct dw_pcie_host_ops rcar_gen4_pcie_host_ops = {
> > +	.host_init = rcar_gen4_pcie_host_init,
> > +};
> > +
> > +static int rcar_gen4_add_dw_pcie_rp(struct rcar_gen4_pcie *rcar,
> > +				   struct platform_device *pdev)
> > +{
> > +	struct dw_pcie *dw = &rcar->dw;
> > +	struct dw_pcie_rp *pp = &dw->pp;
> > +	int ret;
> > +
> > +	pp->ops = &rcar_gen4_pcie_host_ops;
> > +	pp->no_msix = true;
> > +	dw_pcie_cap_set(dw, REQ_RES);
> > +
> > +	ret = dw_pcie_host_init(pp);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "Failed to initialize host\n");
> > +		return ret;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static void rcar_gen4_remove_dw_pcie_rp(struct rcar_gen4_pcie *rcar)
> > +{
> > +	dw_pcie_host_deinit(&rcar->dw.pp);
> > +	gpiod_set_value_cansleep(rcar->dw.pe_rst, 1);
> > +}
> > +
> 
> > +static int rcar_gen4_pcie_get_resources(struct rcar_gen4_pcie *rcar,
> > +					struct platform_device *pdev)
> > +{
> > +	struct dw_pcie *dw = &rcar->dw;
> > +
> > +	/* Renesas-specific registers */
> > +	rcar->base = devm_platform_ioremap_resource_byname(pdev, "app");
> > +	if (IS_ERR(rcar->base))
> > +		return PTR_ERR(rcar->base);
> > +
> > +	return rcar_gen4_pcie_devm_reset_get(rcar, dw->dev);
> > +}
> 
> Please note that after fixing the RCAR PCIe EP DT-bindings to permit
> the "app" instead of "appl" named reg property (see my note the RCAR
> PCie EP DT-bindings patch) the method above will be identical in the
> RCAR RP and EP driver implementations. So you'll be able to move it
> to the pcie-rcar-gen4.c driver.

I think so. I'll modify it.

> > +
> > +static int rcar_gen4_pcie_probe(struct platform_device *pdev)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	struct rcar_gen4_pcie *rcar;
> > +	int err;
> > +
> > +	rcar = rcar_gen4_pcie_devm_alloc(dev);
> > +	if (!rcar)
> > +		return -ENOMEM;
> > +
> > +	err = rcar_gen4_pcie_get_resources(rcar, pdev);
> > +	if (err < 0) {
> > +		dev_err(dev, "Failed to request resource: %d\n", err);
> > +		return err;
> > +	}
> > +
> > +	platform_set_drvdata(pdev, rcar);
> > +
> > +	err = rcar_gen4_pcie_prepare(rcar);
> > +	if (err < 0)
> > +		return err;
> > +
> > +	err = rcar_gen4_add_dw_pcie_rp(rcar, pdev);
> > +	if (err < 0)
> > +		goto err_add;
> > +
> > +	return 0;
> > +
> > +err_add:
> > +	rcar_gen4_pcie_unprepare(rcar);
> > +
> > +	return err;
> > +}
> > +
> > +static int rcar_gen4_pcie_remove(struct platform_device *pdev)
> > +{
> > +	struct rcar_gen4_pcie *rcar = platform_get_drvdata(pdev);
> > +
> > +	rcar_gen4_remove_dw_pcie_rp(rcar);
> > +	rcar_gen4_pcie_unprepare(rcar);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct of_device_id rcar_gen4_pcie_of_match[] = {
> > +	{ .compatible = "renesas,rcar-gen4-pcie", },
> > +	{},
> > +};
> > +
> > +static struct platform_driver rcar_gen4_pcie_driver = {
> > +	.driver = {
> > +		.name = "pcie-rcar-gen4",
> > +		.of_match_table = rcar_gen4_pcie_of_match,
> > +	},
> > +	.probe = rcar_gen4_pcie_probe,
> > +	.remove = rcar_gen4_pcie_remove,
> > +};
> > +module_platform_driver(rcar_gen4_pcie_driver);
> > +
> > +MODULE_DESCRIPTION("Renesas R-Car Gen4 PCIe host controller driver");
> > +MODULE_LICENSE("GPL");
> > diff --git a/drivers/pci/controller/dwc/pcie-rcar-gen4.c b/drivers/pci/controller/dwc/pcie-rcar-gen4.c
> > new file mode 100644
> > index 000000000000..a6a29d6125c8
> > --- /dev/null
> > +++ b/drivers/pci/controller/dwc/pcie-rcar-gen4.c
> > @@ -0,0 +1,166 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * PCIe host/endpoint controller driver for Renesas R-Car Gen4 Series SoCs
> > + * Copyright (C) 2022-2023 Renesas Electronics Corporation
> > + */
> > +
> > +#include <linux/io.h>
> > +#include <linux/of_device.h>
> > +#include <linux/pci.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/reset.h>
> > +
> > +#include "pcie-rcar-gen4.h"
> > +#include "pcie-designware.h"
> > +
> > +/* Renesas-specific */
> > +#define PCIERSTCTRL1		0x0014
> > +#define  APP_HOLD_PHY_RST	BIT(16)
> > +#define  APP_LTSSM_ENABLE	BIT(0)
> > +
> > +static void rcar_gen4_pcie_ltssm_enable(struct rcar_gen4_pcie *rcar,
> > +					bool enable)
> > +{
> > +	u32 val;
> > +
> > +	val = readl(rcar->base + PCIERSTCTRL1);
> > +	if (enable) {
> > +		val |= APP_LTSSM_ENABLE;
> > +		val &= ~APP_HOLD_PHY_RST;
> > +	} else {
> > +		val &= ~APP_LTSSM_ENABLE;
> > +		val |= APP_HOLD_PHY_RST;
> > +	}
> > +	writel(val, rcar->base + PCIERSTCTRL1);
> > +}
> > +
> > +static int rcar_gen4_pcie_link_up(struct dw_pcie *dw)
> > +{
> > +	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
> > +	u32 val, mask;
> > +
> > +	val = readl(rcar->base + PCIEINTSTS0);
> > +	mask = RDLH_LINK_UP | SMLH_LINK_UP;
> > +
> > +	return (val & mask) == mask;
> > +}
> > +
> > +static int rcar_gen4_pcie_start_link(struct dw_pcie *dw)
> > +{
> > +	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
> > +
> > +	rcar_gen4_pcie_ltssm_enable(rcar, true);
> > +
> > +	return 0;
> > +}
> > +
> > +static void rcar_gen4_pcie_stop_link(struct dw_pcie *dw)
> > +{
> > +	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
> > +
> > +	rcar_gen4_pcie_ltssm_enable(rcar, false);
> > +}
> > +
> > +int rcar_gen4_pcie_set_device_type(struct rcar_gen4_pcie *rcar, bool rc,
> > +				   int num_lanes)
> > +{
> > +	u32 val;
> > +
> > +	/* Note: Assume the reset is asserted here */
> > +	val = readl(rcar->base + PCIEMSR0);
> > +	if (rc)
> > +		val |= DEVICE_TYPE_RC;
> > +	else
> > +		val |= DEVICE_TYPE_EP;
> > +	if (num_lanes < 4)
> > +		val |= BIFUR_MOD_SET_ON;
> > +	writel(val, rcar->base + PCIEMSR0);
> > +
> > +	return reset_control_deassert(rcar->rst);
> > +}
> > +
> 
> > +void rcar_gen4_pcie_disable_bar(struct dw_pcie *dw, u32 bar_mask_reg)
> > +{
> > +	dw_pcie_writel_dbi(dw, SHADOW_REG(bar_mask_reg), 0x0);
> > +}
> > +
> 
> Hm, this seems like a DBI2/DBI_CS2 CSRs. By default the DW PCIe core
> driver assumes that the DBI2 is defined within the 0x1000 offset with
> respect to the DBI space (see dw_pcie_get_resources()). In your case
> it must be within 0x2000 offset (judging by the SHADOW_REG() macro).
> What about either defining the "dbi2" reg-named DT-property in the
> DT-bindings (see DW PCIe RP/EP generic DT-bindings) or re-defining
> the dw_pcie.dbi_base2 field in your LLDD?
> 
> Note the dbi_cs2 space is currently utilized in the DW PCIe EP driver
> only in the framework of the BARs mapping setup procedure. Are you
> sure it's working well in your case seeing the DBI2 base address is
> most likely incorrectly initialized? Anyway if you get to define the
> dbi_base2 field properly you'll be able to use the
> dw_pcie_ep_reset_bar() method in the EP driver instead of the function
> above (please see the way it's utilized in the rest of the DW PCIe EP
> low-level drivers).

Thank you for your comments. I'll investigate it.

> Another question. Are you sure the method above is relevant to the DW
> PCIe Root Port controller? I don't see any shadow registers defined
> for the host BARs in any HW-manual I've got (4.60, 4.70, 4.90, 5.20,
> 5.30, 5.40). What are they used for anyway?

To be honest, I reuse this code from our BSP which other guy made.
So, I'll investigate it.

> > +void rcar_gen4_pcie_set_max_link_width(struct dw_pcie *dw, int num_lanes)
> > +{
> > +	u32 val = dw_pcie_readl_dbi(dw, EXPCAP(PCI_EXP_LNKCAP));
> > +
> > +	val &= ~PCI_EXP_LNKCAP_MLW;
> > +	switch (num_lanes) {
> > +	case 1:
> > +		val |= PCI_EXP_LNKCAP_MLW_X1;
> > +		break;
> > +	case 2:
> > +		val |= PCI_EXP_LNKCAP_MLW_X2;
> > +		break;
> > +	case 4:
> > +		val |= PCI_EXP_LNKCAP_MLW_X4;
> > +		break;
> > +	default:
> > +		dev_info(dw->dev, "Invalid num-lanes %d\n", num_lanes);
> > +		val |= PCI_EXP_LNKCAP_MLW_X1;
> > +		break;
> > +	}
> > +	dw_pcie_writel_dbi(dw, EXPCAP(PCI_EXP_LNKCAP), val);
> > +}
> 
> This seems to be a generic action. What about moving it to
> pcie-designware.c implementing a function similar to
> dw_pcie_link_set_max_speed(), which would be called in
> dw_pcie_setup()?

Rob also suggests it. So, I'll investigate it.

> It could be named as dw_pcie_link_set_max_(link_)?width() and besides
> of the code above would consist of the PCIE_PORT_LINK_CONTROL and
> PCIE_LINK_WIDTH_SPEED_CONTROL CSR initializations performed in
> dw_pcie_setup().

Thank you for your comments.

> * Please do that in a separate pre-requisite patch.
> 
> > +
> > +int rcar_gen4_pcie_prepare(struct rcar_gen4_pcie *rcar)
> > +{
> > +	struct device *dev = rcar->dw.dev;
> > +	int err;
> > +
> > +	pm_runtime_enable(dev);
> > +	err = pm_runtime_resume_and_get(dev);
> > +	if (err < 0) {
> > +		dev_err(dev, "Failed to resume/get Runtime PM\n");
> > +		pm_runtime_disable(dev);
> > +	}
> > +
> > +	return err;
> > +}
> > +
> > +void rcar_gen4_pcie_unprepare(struct rcar_gen4_pcie *rcar)
> > +{
> > +	struct device *dev = rcar->dw.dev;
> > +
> > +	if (!reset_control_status(rcar->rst))
> > +		reset_control_assert(rcar->rst);
> > +	pm_runtime_put(dev);
> > +	pm_runtime_disable(dev);
> > +}
> > +
> > +int rcar_gen4_pcie_devm_reset_get(struct rcar_gen4_pcie *rcar,
> > +				  struct device *dev)
> > +{
> > +	rcar->rst = devm_reset_control_get(dev, NULL);
> > +	if (IS_ERR(rcar->rst)) {
> > +		dev_err(dev, "Failed to get Cold-reset\n");
> > +		return PTR_ERR(rcar->rst);
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct dw_pcie_ops dw_pcie_ops = {
> > +	.start_link = rcar_gen4_pcie_start_link,
> > +	.stop_link = rcar_gen4_pcie_stop_link,
> > +	.link_up = rcar_gen4_pcie_link_up,
> > +};
> > +
> > +struct rcar_gen4_pcie *rcar_gen4_pcie_devm_alloc(struct device *dev)
> > +{
> > +	struct rcar_gen4_pcie *rcar;
> > +
> > +	rcar = devm_kzalloc(dev, sizeof(*rcar), GFP_KERNEL);
> > +	if (!rcar)
> > +		return NULL;
> > +
> > +	rcar->dw.dev = dev;
> > +	rcar->dw.ops = &dw_pcie_ops;
> > +	dw_pcie_cap_set(&rcar->dw, EDMA_UNROLL);
> > +
> > +	return rcar;
> > +}
> > diff --git a/drivers/pci/controller/dwc/pcie-rcar-gen4.h b/drivers/pci/controller/dwc/pcie-rcar-gen4.h
> > new file mode 100644
> > index 000000000000..1cdce0cf7dac
> > --- /dev/null
> > +++ b/drivers/pci/controller/dwc/pcie-rcar-gen4.h
> > @@ -0,0 +1,63 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * PCIe host/endpoint controller driver for Renesas R-Car Gen4 Series SoCs
> > + * Copyright (C) 2022-2023 Renesas Electronics Corporation
> > + */
> > +
> > +#ifndef _PCIE_RCAR_GEN4_H_
> > +#define _PCIE_RCAR_GEN4_H_
> > +
> > +#include <linux/io.h>
> > +#include <linux/pci.h>
> > +#include <linux/reset.h>
> > +
> > +#include "pcie-designware.h"
> > +
> 
> > +/* PCI Express capability */
> > +#define EXPCAP(x)		(0x0070 + (x))
> > +/* ASPM L1 PM Substates */
> > +#define L1PSCAP(x)		(0x01bc + (x))
> > +/* PCI Shadow offset */
> > +#define SHADOW_REG(x)		(0x2000 + (x))
> > +/* BAR Mask registers */
> > +#define BAR0MASKF		0x0010
> > +#define BAR1MASKF		0x0014
> > +#define BAR2MASKF		0x0018
> > +#define BAR3MASKF		0x001c
> > +#define BAR4MASKF		0x0020
> > +#define BAR5MASKF		0x0024
> > +
> 
> * If you get to take some of my notes above into account you'll be able to
> drop these macros...

I got it.

> > +/* Renesas-specific */
> > +#define PCIEMSR0		0x0000
> > +#define  BIFUR_MOD_SET_ON	BIT(0)
> > +#define  DEVICE_TYPE_EP		0
> > +#define  DEVICE_TYPE_RC		BIT(4)
> > +
> > +#define PCIEINTSTS0		0x0084
> > +#define PCIEINTSTS0EN		0x0310
> > +#define  MSI_CTRL_INT		BIT(26)
> > +#define  SMLH_LINK_UP		BIT(7)
> > +#define  RDLH_LINK_UP		BIT(6)
> > +#define PCIEDMAINTSTSEN		0x0314
> > +#define  PCIEDMAINTSTSEN_INIT	GENMASK(15, 0)
> 
> Vendor-specific prefix would make the code using these macros much
> more readable.

I got it. I'll rename them.

> > +
> > +struct rcar_gen4_pcie {
> > +	struct dw_pcie		dw;
> > +	void __iomem		*base;
> > +	struct reset_control	*rst;
> > +};
> > +#define to_rcar_gen4_pcie(x)	dev_get_drvdata((x)->dev)
> > +
> 
> > +u32 rcar_gen4_pcie_readl(struct rcar_gen4_pcie *pcie, u32 reg);
> > +void rcar_gen4_pcie_writel(struct rcar_gen4_pcie *pcie, u32 reg, u32 val);
> 
> I don't see these two methods being defined in your driver. Are these
> artefacts from the previous patch revisions?

Oops. I'll remove them.

Best regards,
Yoshihiro Shimoda

> -Serge(y)
> 
> > +int rcar_gen4_pcie_set_device_type(struct rcar_gen4_pcie *rcar, bool rc,
> > +				   int num_lanes);
> 
> > +void rcar_gen4_pcie_disable_bar(struct dw_pcie *dw, u32 bar_mask_reg);
> > +void rcar_gen4_pcie_set_max_link_width(struct dw_pcie *pci, int num_lanes);
> > +int rcar_gen4_pcie_prepare(struct rcar_gen4_pcie *pcie);
> > +void rcar_gen4_pcie_unprepare(struct rcar_gen4_pcie *pcie);
> > +int rcar_gen4_pcie_devm_reset_get(struct rcar_gen4_pcie *pcie,
> > +				  struct device *dev);
> > +struct rcar_gen4_pcie *rcar_gen4_pcie_devm_alloc(struct device *dev);
> > +
> > +#endif /* _PCIE_RCAR_GEN4_H_ */
> > --
> > 2.25.1
> >
> >




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux