On 15.02.2023 08:03, Manivannan Sadhasivam wrote:
> Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
> to the CPU cores. But this relationship is not represented in DTS so far.
>
> So let's make cpufreq node as the clock provider and CPU nodes as the
> consumers. The clock index for each CPU node is based on the frequency
> domain index.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index 2f0e460acccd..44c8851178eb 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -97,6 +97,7 @@ CPU0: cpu@0 {
> device_type = "cpu";
> compatible = "qcom,kryo485";
> reg = <0x0 0x0>;
> + clocks = <&cpufreq_hw 0>;
> enable-method = "psci";
> capacity-dmips-mhz = <448>;
> dynamic-power-coefficient = <205>;
> @@ -127,6 +128,7 @@ CPU1: cpu@100 {
> device_type = "cpu";
> compatible = "qcom,kryo485";
> reg = <0x0 0x100>;
> + clocks = <&cpufreq_hw 0>;
> enable-method = "psci";
> capacity-dmips-mhz = <448>;
> dynamic-power-coefficient = <205>;
> @@ -151,6 +153,7 @@ CPU2: cpu@200 {
> device_type = "cpu";
> compatible = "qcom,kryo485";
> reg = <0x0 0x200>;
> + clocks = <&cpufreq_hw 0>;
> enable-method = "psci";
> capacity-dmips-mhz = <448>;
> dynamic-power-coefficient = <205>;
> @@ -175,6 +178,7 @@ CPU3: cpu@300 {
> device_type = "cpu";
> compatible = "qcom,kryo485";
> reg = <0x0 0x300>;
> + clocks = <&cpufreq_hw 0>;
> enable-method = "psci";
> capacity-dmips-mhz = <448>;
> dynamic-power-coefficient = <205>;
> @@ -199,6 +203,7 @@ CPU4: cpu@400 {
> device_type = "cpu";
> compatible = "qcom,kryo485";
> reg = <0x0 0x400>;
> + clocks = <&cpufreq_hw 1>;
> enable-method = "psci";
> capacity-dmips-mhz = <1024>;
> dynamic-power-coefficient = <379>;
> @@ -223,6 +228,7 @@ CPU5: cpu@500 {
> device_type = "cpu";
> compatible = "qcom,kryo485";
> reg = <0x0 0x500>;
> + clocks = <&cpufreq_hw 1>;
> enable-method = "psci";
> capacity-dmips-mhz = <1024>;
> dynamic-power-coefficient = <379>;
> @@ -248,6 +254,7 @@ CPU6: cpu@600 {
> device_type = "cpu";
> compatible = "qcom,kryo485";
> reg = <0x0 0x600>;
> + clocks = <&cpufreq_hw 1>;
> enable-method = "psci";
> capacity-dmips-mhz = <1024>;
> dynamic-power-coefficient = <379>;
> @@ -272,6 +279,7 @@ CPU7: cpu@700 {
> device_type = "cpu";
> compatible = "qcom,kryo485";
> reg = <0x0 0x700>;
> + clocks = <&cpufreq_hw 2>;
> enable-method = "psci";
> capacity-dmips-mhz = <1024>;
> dynamic-power-coefficient = <444>;
> @@ -5481,6 +5489,7 @@ cpufreq_hw: cpufreq@18591000 {
> <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
> #freq-domain-cells = <1>;
> + #clock-cells = <1>;
> };
> };
>
