* Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> [141113 06:55]:
> On 11/13/2014 03:49 PM, Roger Quadros wrote:
> > On 11/13/2014 04:44 PM, Marc Kleine-Budde wrote:
> >> On 11/13/2014 03:40 PM, Roger Quadros wrote:
> >>> On 11/13/2014 04:07 PM, Marc Kleine-Budde wrote:
> >>>> On 11/13/2014 01:22 PM, Roger Quadros wrote:
> >>>>> The SoC contains 2 DCAN modules. Add them.
> >>>>>
> >>>>> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
> >>>>> ---
> >>>>> arch/arm/boot/dts/am4372.dtsi | 22 ++++++++++++++++++++++
> >>>>> 1 file changed, 22 insertions(+)
> >>>>>
> >>>>> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
> >>>>> index 899c57c..12fb1db 100644
> >>>>> --- a/arch/arm/boot/dts/am4372.dtsi
> >>>>> +++ b/arch/arm/boot/dts/am4372.dtsi
> >>>>> @@ -901,6 +901,28 @@
> >>>>> compatible = "mmio-sram";
> >>>>> reg = <0x40300000 0x40000>; /* 256k */
> >>>>> };
> >>>>> +
> >>>>> + dcan0: can@481cc000 {
> >>>>> + compatible = "ti,am3352-d_can";
> >>>>
> >>>> You should add "ti,am4372-d_can" as first compatible here.
> >>>>
> >>> We don't have a separate compatible id for am4372-d_can
> >>> as it the IP exactly same as am3352-d_can.
> >>
> >> Having the "ti,am4372-d_can" compatible gives you the freedom to add
> >> some spacial handling for the IP if there turns that you need to without
> >> needing to modify the device tree. (We do this on imx.)
> >
> > Agreed. On OMAP platforms we don't add new compatible IDs unless we really need to.
> > Can we add "ti,am4372-d_can" even if it is not mentioned in Documentation/devicetree/bindings?
> >
> > Tony what is your preference?
>
> I don't insist, do it the Omap way :)
I agree it's good to add if we need to add custom handling later on.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
