On 2/15/2023 4:25 PM, POOVENDHAN SELVARAJ wrote:
On 2/14/2023 6:27 PM, Srinivas Kandagatla wrote:
On 14/02/2023 05:14, Poovendhan Selvaraj wrote:
CrashDump collection is based on the DLOAD bit of TCSR register.
To retain other bits, we read the register and modify only the DLOAD
bit as
the other bits have their own significance.
Co-developed-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
Signed-off-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
Co-developed-by: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
Signed-off-by: Poovendhan Selvaraj <quic_poovendh@xxxxxxxxxxx>
---
Changes in V4:
- retain the orginal value of tcsr register when download mode
is not set
drivers/firmware/qcom_scm.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 468d4d5ab550..8a34b386ac3a 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -407,7 +407,7 @@ int qcom_scm_set_remote_state(u32 state, u32 id)
}
EXPORT_SYMBOL(qcom_scm_set_remote_state);
-static int __qcom_scm_set_dload_mode(struct device *dev, bool
enable)
+static int __qcom_scm_set_dload_mode(struct device *dev, u32 val,
bool enable)
{
struct qcom_scm_desc desc = {
.svc = QCOM_SCM_SVC_BOOT,
@@ -417,7 +417,8 @@ static int __qcom_scm_set_dload_mode(struct
device *dev, bool enable)
.owner = ARM_SMCCC_OWNER_SIP,
};
- desc.args[1] = enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0;
+ desc.args[1] = enable ? val | QCOM_SCM_BOOT_SET_DLOAD_MODE :
+ val & ~(QCOM_SCM_BOOT_SET_DLOAD_MODE);
why not read the value here before setting the DLOAD Mode instead of
doing it in qcom_scm_set_download_mode()?
that would make the code simple and readable.
dload_addr_val is used in both if and else if cases in
qcom_scm_set_download_mode(),
so we read in qcom_scm_set_download_mode() function and pass to
__qcom_scm_set_dload_mode().
return qcom_scm_call_atomic(__scm->dev, &desc, NULL);
}
@@ -426,15 +427,19 @@ static void qcom_scm_set_download_mode(bool
enable)
{
bool avail;
int ret = 0;
+ u32 dload_addr_val;
avail = __qcom_scm_is_call_available(__scm->dev,
QCOM_SCM_SVC_BOOT,
QCOM_SCM_BOOT_SET_DLOAD_MODE);
+ ret = qcom_scm_io_readl(__scm->dload_mode_addr, &dload_addr_val);
+
not checking ret value here before proceeding?
Okay, sure..will address in next patch series.
if (avail) {
- ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
+ ret = __qcom_scm_set_dload_mode(__scm->dev, dload_addr_val,
enable);
} else if (__scm->dload_mode_addr) {
- ret = qcom_scm_io_writel(__scm->dload_mode_addr,
- enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0);
+ ret = qcom_scm_io_writel(__scm->dload_mode_addr, enable ?
+ dload_addr_val | QCOM_SCM_BOOT_SET_DLOAD_MODE :
+ dload_addr_val & ~(QCOM_SCM_BOOT_SET_DLOAD_MODE));
} else {
dev_err(__scm->dev,
"No available mechanism for setting download mode\n");
Please excuse the format in Previous mail response.
Had some issues in email client and now it's fixed.
Regards,
Poovendhan S
