[PATCH 1/2] dt-bindings: usb: dwc3: Add snps,ulpi-ext-vbus-drv quirk

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some ULPI USB PHYs do not support an internal vBus supply, to drive the
CPEN pin properly, it requires configuration of the ULPI DRVVBUSEXTERNAL
bit of the USB ULPI PHY OTG_CTRL register.

Added 'snps,ulpi-ext-vbus-drv' DT property to configure the USB2 PHY to
drives VBUS with an external supply.

When the ULPIEXTVBUSDRV bit is set to '1' in the Global USB2 PHY
Configuration registers, PHY drive vBus with an external 5V supply source.

Signed-off-by: Piyush Mehta <piyush.mehta@xxxxxxx>
---
 Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index 6d78048c4613..4e4a2dfb77b1 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -246,6 +246,14 @@ properties:
       of resume. This option is to support certain legacy ULPI PHYs.
     type: boolean
 
+  snps,ulpi-ext-vbus-drv:
+    description:
+      Some ULPI USB PHY does not support internal VBUS supply, and driving
+      the CPEN pin, requires the configuration of the ulpi DRVVBUSEXTERNAL
+      bit. When set, the xhci host will configure the USB2 PHY drives VBUS
+      with an external supply.
+    type: boolean
+
   snps,is-utmi-l1-suspend:
     description:
       True when DWC3 asserts output signal utmi_l1_suspend_n, false when
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux