Hi Liu,
thanks for the update.
Am Montag, 13. Februar 2023, 09:56:10 CET schrieb Liu Ying:
> The single LCDIF embedded in i.MX93 SoC may drive multiple displays
> simultaneously. Check bus format and flags across first bridges in
> ->atomic_check() to ensure they are consistent. This is a preparation
> for adding i.MX93 LCDIF support.
>
> Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
> ---
> v2->v3:
> * No change.
>
> v1->v2:
> * Split from patch 2/2 in v1. (Marek, Alexander)
> * Drop a comment about bridge input bus format from
> lcdif_crtc_atomic_check().
>
> drivers/gpu/drm/mxsfb/lcdif_drv.c | 2 -
> drivers/gpu/drm/mxsfb/lcdif_drv.h | 1 -
> drivers/gpu/drm/mxsfb/lcdif_kms.c | 76 ++++++++++++++++++++++---------
> 3 files changed, 55 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/gpu/drm/mxsfb/lcdif_drv.c
> b/drivers/gpu/drm/mxsfb/lcdif_drv.c index cc2ceb301b96..b5b9a8e273c6 100644
> --- a/drivers/gpu/drm/mxsfb/lcdif_drv.c
> +++ b/drivers/gpu/drm/mxsfb/lcdif_drv.c
> @@ -52,8 +52,6 @@ static int lcdif_attach_bridge(struct lcdif_drm_private
> *lcdif) if (ret)
> return dev_err_probe(drm->dev, ret, "Failed to attach
bridge\n");
>
> - lcdif->bridge = bridge;
> -
> return 0;
> }
>
> diff --git a/drivers/gpu/drm/mxsfb/lcdif_drv.h
> b/drivers/gpu/drm/mxsfb/lcdif_drv.h index 6cdba6e20c02..aa6d099a1897 100644
> --- a/drivers/gpu/drm/mxsfb/lcdif_drv.h
> +++ b/drivers/gpu/drm/mxsfb/lcdif_drv.h
> @@ -31,7 +31,6 @@ struct lcdif_drm_private {
> } planes;
> struct drm_crtc crtc;
> struct drm_encoder encoder;
> - struct drm_bridge *bridge;
> };
>
> static inline struct lcdif_drm_private *
> diff --git a/drivers/gpu/drm/mxsfb/lcdif_kms.c
> b/drivers/gpu/drm/mxsfb/lcdif_kms.c index 294cecdf5439..4ea3d2b2cf61 100644
> --- a/drivers/gpu/drm/mxsfb/lcdif_kms.c
> +++ b/drivers/gpu/drm/mxsfb/lcdif_kms.c
> @@ -17,6 +17,7 @@
> #include <drm/drm_atomic_helper.h>
> #include <drm/drm_bridge.h>
> #include <drm/drm_color_mgmt.h>
> +#include <drm/drm_connector.h>
> #include <drm/drm_crtc.h>
> #include <drm/drm_encoder.h>
> #include <drm/drm_fb_dma_helper.h>
> @@ -424,15 +425,19 @@ static int lcdif_crtc_atomic_check(struct drm_crtc
> *crtc, struct drm_atomic_state *state)
> {
> struct drm_device *drm = crtc->dev;
> - struct lcdif_drm_private *lcdif = to_lcdif_drm_private(drm);
> struct drm_crtc_state *crtc_state =
drm_atomic_get_new_crtc_state(state,
>
crtc);
> struct lcdif_crtc_state *lcdif_crtc_state =
> to_lcdif_crtc_state(crtc_state); bool has_primary = crtc_state->plane_mask
> &
> drm_plane_mask(crtc->primary);
> + struct drm_connector_state *connector_state;
> + struct drm_connector *connector;
> + struct drm_encoder *encoder;
> struct drm_bridge_state *bridge_state;
> - struct drm_bridge *bridge = lcdif->bridge;
> - int ret;
> + struct drm_bridge *bridge;
> + u32 bus_format, bus_flags;
> + bool format_set = false, flags_set = false;
> + int ret, i;
>
> /* The primary plane has to be enabled when the CRTC is active. */
> if (crtc_state->active && !has_primary)
> @@ -442,26 +447,55 @@ static int lcdif_crtc_atomic_check(struct drm_crtc
> *crtc, if (ret)
> return ret;
>
> - bridge_state = drm_atomic_get_new_bridge_state(state, bridge);
> - if (!bridge_state)
> - lcdif_crtc_state->bus_format = MEDIA_BUS_FMT_FIXED;
> - else
> - lcdif_crtc_state->bus_format = bridge_state-
>input_bus_cfg.format;
> -
> - if (lcdif_crtc_state->bus_format == MEDIA_BUS_FMT_FIXED) {
> - dev_warn_once(drm->dev,
> - "Bridge does not provide bus format,
assuming
> MEDIA_BUS_FMT_RGB888_1X24.\n" - "Please fix
bridge driver by
> handling atomic_get_input_bus_fmts.\n"); - lcdif_crtc_state-
>bus_format =
> MEDIA_BUS_FMT_RGB888_1X24;
> + /* Try to find consistent bus format and flags across first bridges.
*/
> + for_each_new_connector_in_state(state, connector, connector_state,
i) {
> + if (!connector_state->crtc)
> + continue;
> +
> + encoder = connector_state->best_encoder;
> +
> + bridge = drm_bridge_chain_get_first_bridge(encoder);
> + if (!bridge)
> + continue;
> +
> + bridge_state = drm_atomic_get_new_bridge_state(state,
bridge);
> + if (!bridge_state)
> + bus_format = MEDIA_BUS_FMT_FIXED;
> + else
> + bus_format = bridge_state->input_bus_cfg.format;
> +
> + if (bus_format == MEDIA_BUS_FMT_FIXED) {
> + dev_warn(drm->dev,
> + "[ENCODER:%d:%s]'s bridge does not
provide bus format, assuming
> MEDIA_BUS_FMT_RGB888_1X24.\n" +
"Please fix bridge driver by handling
> atomic_get_input_bus_fmts.\n", +
encoder->base.id, encoder->name);
> + bus_format = MEDIA_BUS_FMT_RGB888_1X24;
> + }
> +
> + if (!format_set) {
> + lcdif_crtc_state->bus_format = bus_format;
> + format_set = true;
> + } else if (lcdif_crtc_state->bus_format != bus_format) {
> + DRM_DEV_DEBUG_DRIVER(drm->dev, "inconsistent bus
format\n");
Is there another way to know the actual reason the atomic_check fails? Maybe
this is worthy to be an error message instead.
Best regards,
Alexander
> + return -EINVAL;
> + }
> +
> + if (bridge->timings)
> + bus_flags = bridge->timings->input_bus_flags;
> + else if (bridge_state)
> + bus_flags = bridge_state->input_bus_cfg.flags;
> + else
> + bus_flags = 0;
> +
> + if (!flags_set) {
> + lcdif_crtc_state->bus_flags = bus_flags;
> + flags_set = true;
> + } else if (lcdif_crtc_state->bus_flags != bus_flags) {
> + DRM_DEV_DEBUG_DRIVER(drm->dev, "inconsistent bus
flags\n");
> + return -EINVAL;
> + }
> }
>
> - if (bridge->timings)
> - lcdif_crtc_state->bus_flags = bridge->timings-
>input_bus_flags;
> - else if (bridge_state)
> - lcdif_crtc_state->bus_flags = bridge_state-
>input_bus_cfg.flags;
> - else
> - lcdif_crtc_state->bus_flags = 0;
> -
> return 0;
> }
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
