On Thu, Nov 13, 2014 at 02:22:50PM +0200, Roger Quadros wrote:
> Add "raminit-syscon" property to specify the RAMINIT register.
> Add clock information.
> Rename can nodes from "d_can" to "can" to be compliant
> with the ePAPR specs.
>
> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
> ---
> arch/arm/boot/dts/am33xx.dtsi | 20 ++++++++++++--------
> 1 file changed, 12 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index 9f3058c..74fefa1 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -338,20 +338,24 @@
> interrupts = <91>;
> };
>
> - dcan0: d_can@481cc000 {
> - compatible = "bosch,d_can";
> + dcan0: can@481cc000 {
> + compatible = "ti,am3352-d_can";
> ti,hwmods = "d_can0";
> - reg = <0x481cc000 0x2000
> - 0x44e10644 0x4>;
> + reg = <0x481cc000 0x2000>;
> + clocks = <&dcan0_fck>;
> + clock-names = "fck";
> + syscon-raminit = <&am33xx_control_module 0x644 0>;
Yeah, I missed to write the mail that I disagreed with the "dcan_0/1"
compatible-properties of V3. The second parameter to syscon here is much
better!
Acked-by: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Attachment:
signature.asc
Description: Digital signature
