[PATCH v2 2/2] arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio

[Andrew Halaney <ahalaney@xxxxxxxxxx>]

The deprecated property is named snps,reset-gpio, but this devicetree
used snps,reset-gpios instead which results in the reset not being used
and the following make dtbs_check error:

    ./arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: ethernet@5b050000: 'snps,reset-gpio' is a dependency of 'snps,reset-delays-us'
        From schema: ./Documentation/devicetree/bindings/net/snps,dwmac.yaml

Use the preferred method of defining the reset gpio in the phy node
itself. Note that this drops the 10 us pre-delay, but prior this wasn't
used at all and a pre-delay doesn't make much sense in this context so
it should be fine.

Fixes: 8dd495d12374 ("arm64: dts: freescale: add support for i.MX8DXL EVK board")
Signed-off-by: Andrew Halaney <ahalaney@xxxxxxxxxx>
---

Changes since v1:
    * Moved the reset into the ethernet-phy node itself instead of
      fixing the deprecated usage (for that reason I did not collect
      Fabio's review tag)

 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index 1bcf228a22b8..852420349c01 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -121,8 +121,6 @@ &eqos {
 	phy-handle = <&ethphy0>;
 	nvmem-cells = <&fec_mac1>;
 	nvmem-cell-names = "mac-address";
-	snps,reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
-	snps,reset-delays-us = <10 20 200000>;
 	status = "okay";
 
 	mdio {
@@ -136,6 +134,9 @@ ethphy0: ethernet-phy@0 {
 			eee-broken-1000t;
 			qca,disable-smarteee;
 			qca,disable-hibernation-mode;
+			reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20>;
+			reset-deassert-us = <200000>;
 			vddio-supply = <&vddio0>;
 
 			vddio0: vddio-regulator {
-- 
2.39.1