Re: [PATCH v2 2/2] ARM: dts: r9a06g032: add r9a06g032-rzn1d400-eb board device-tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Clément,

CC Gareth

On Thu, Feb 9, 2023 at 2:32 PM Clément Léger <clement.leger@xxxxxxxxxxx> wrote:
> The EB board (Expansion board) supports both RZ/N1D and RZ-N1S. Since this
> configuration targets only the RZ/N1D, it is named r9a06g032-rzn1d400-eb.
> It adds support for the 2 additional switch ports (port C and D) that are
> available on that board.
>
> Signed-off-by: Clément Léger <clement.leger@xxxxxxxxxxx>

Thanks for your patch!

> --- /dev/null
> +++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-eb.dts
> @@ -0,0 +1,94 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for the RZN1D-EB Board
> + *
> + * Copyright (C) 2023 Schneider-Electric
> + *
> + */
> +
> +#include "r9a06g032-rzn1d400-db.dts"
> +
> +/ {
> +       model = "RZN1D-EB Board";
> +       compatible = "renesas,rzn1d400-eb", "renesas,rzn1d400-db",
> +                    "renesas,r9a06g032";
> +};
> +
> +&mii_conv2 {
> +       renesas,miic-input = <MIIC_SWITCH_PORTD>;
> +       status = "okay";
> +};
> +
> +&mii_conv3 {
> +       renesas,miic-input = <MIIC_SWITCH_PORTC>;
> +       status = "okay";
> +};
> +
> +&pinctrl{
> +       pins_eth1: pins-eth1 {
> +               pinmux = <RZN1_PINMUX(12, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> +                        <RZN1_PINMUX(13, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> +                        <RZN1_PINMUX(14, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> +                        <RZN1_PINMUX(15, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> +                        <RZN1_PINMUX(16, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> +                        <RZN1_PINMUX(17, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> +                        <RZN1_PINMUX(18, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> +                        <RZN1_PINMUX(19, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> +                        <RZN1_PINMUX(20, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> +                        <RZN1_PINMUX(21, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> +                        <RZN1_PINMUX(22, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> +                        <RZN1_PINMUX(23, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
> +               drive-strength = <6>;
> +               bias-disable;
> +       };
> +
> +       pins_eth2: pins-eth2 {
> +               pinmux = <RZN1_PINMUX(24, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> +                        <RZN1_PINMUX(25, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> +                        <RZN1_PINMUX(26, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> +                        <RZN1_PINMUX(27, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> +                        <RZN1_PINMUX(28, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> +                        <RZN1_PINMUX(29, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> +                        <RZN1_PINMUX(30, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> +                        <RZN1_PINMUX(31, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> +                        <RZN1_PINMUX(32, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> +                        <RZN1_PINMUX(33, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> +                        <RZN1_PINMUX(34, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> +                        <RZN1_PINMUX(35, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
> +               drive-strength = <6>;
> +               bias-disable;
> +       };
> +};
> +
> +&switch {
> +       pinctrl-names = "default";

No need to specify pinctrl-names, as it is inherited from
r9a06g032-rzn1d400-db.dts.

> +       pinctrl-0 = <&pins_eth1>, <&pins_eth2>, <&pins_eth3>, <&pins_eth4>,
> +                   <&pins_mdio1>;
> +
> +       mdio {
> +               /* CN15 and CN16 switches must be configured in MDIO2 mode */
> +               switch0phy1: ethernet-phy@1 {
> +                       reg = <1>;
> +                       marvell,reg-init = <3 16 0 0x1010>;

marvell,reg-init is not documented in any DT bindings document?

> +               };
> +
> +               switch0phy10: ethernet-phy@10 {
> +                       reg = <10>;
> +                       marvell,reg-init = <3 16 0 0x1010>;
> +               };
> +       };
> +};
> +
> +&switch_port2 {
> +       label = "lan2";
> +       phy-mode = "rgmii-id";
> +       phy-handle = <&switch0phy10>;
> +       status = "okay";
> +};
> +
> +&switch_port3 {
> +       label = "lan3";
> +       phy-mode = "rgmii-id";
> +       phy-handle = <&switch0phy1>;
> +       status = "okay";
> +};

The rest LGTM (as far as I can understand ;-)

Gr{oetje,eeting}s,

                        Geert


--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux