On 14/02/2023 12:01, Luca Weiss wrote:
> Add the CX power domain to the camcc node so the power domain gets
> marked as in-use when camcc is used.
>
> Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sm6350.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> index 1e1d366c92c1..62d6dcd8d1fe 100644
> --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> @@ -1507,6 +1507,8 @@ camcc: clock-controller@ad00000 {
> compatible = "qcom,sm6350-camcc";
> reg = <0 0x0ad00000 0 0x16000>;
> clocks = <&rpmhcc RPMH_CXO_CLK>;
> + power-domains = <&rpmhpd SM6350_CX>;
> + required-opps = <&rpmhpd_opp_low_svs>;
Does not look like you tested the DTS against bindings. Please run `make
dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
for instructions).
Best regards,
Krzysztof
