Convert the Samsung S5K6A3(YX) raw image sensor bindings to DT schema. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- DTS is being fixed here: https://lore.kernel.org/all/20230211134731.85957-3-krzysztof.kozlowski@xxxxxxxxxx/ --- .../bindings/media/i2c/samsung,s5k6a3.yaml | 98 +++++++++++++++++++ .../bindings/media/samsung-s5k6a3.txt | 33 ------- 2 files changed, 98 insertions(+), 33 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml delete mode 100644 Documentation/devicetree/bindings/media/samsung-s5k6a3.txt diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml new file mode 100644 index 000000000000..7e83a94124b5 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/samsung,s5k6a3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5K6A3(YX) raw image sensor + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> + +description: + S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data + interfaces and CCI (I2C compatible) control bus. + +properties: + compatible: + const: samsung,s5k6a3 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: extclk + + clock-frequency: + default: 24000000 + description: extclk clock frequency + + gpios: + maxItems: 1 + description: GPIO connected to the RESET pin + + afvdd-supply: + description: AF (actuator) voltage supply + + svdda-supply: + description: Core voltage supply + + svddio-supply: + description: I/O voltage supply + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + items: + - const: 1 + +required: + - compatible + - clocks + - clock-names + - gpios + - afvdd-supply + - svdda-supply + - svddio-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@10 { + compatible = "samsung,s5k6a3"; + reg = <0x10>; + clock-frequency = <24000000>; + clocks = <&camera 1>; + clock-names = "extclk"; + gpios = <&gpm1 6 GPIO_ACTIVE_LOW>; + afvdd-supply = <&ldo19_reg>; + svdda-supply = <&cam_io_reg>; + svddio-supply = <&ldo19_reg>; + + port { + endpoint { + remote-endpoint = <&csis1_ep>; + data-lanes = <1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt b/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt deleted file mode 100644 index cce01e82f3e3..000000000000 --- a/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt +++ /dev/null @@ -1,33 +0,0 @@ -Samsung S5K6A3(YX) raw image sensor ---------------------------------- - -S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces -and CCI (I2C compatible) control bus. - -Required properties: - -- compatible : "samsung,s5k6a3"; -- reg : I2C slave address of the sensor; -- svdda-supply : core voltage supply; -- svddio-supply : I/O voltage supply; -- afvdd-supply : AF (actuator) voltage supply; -- gpios : specifier of a GPIO connected to the RESET pin; -- clocks : should contain list of phandle and clock specifier pairs - according to common clock bindings for the clocks described - in the clock-names property; -- clock-names : should contain "extclk" entry for the sensor's EXTCLK clock; - -Optional properties: - -- clock-frequency : the frequency at which the "extclk" clock should be - configured to operate, in Hz; if this property is not - specified default 24 MHz value will be used. - -The common video interfaces bindings (see video-interfaces.txt) should be -used to specify link to the image data receiver. The S5K6A3(YX) device -node should contain one 'port' child node with an 'endpoint' subnode. - -Following properties are valid for the endpoint node: - -- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in - video-interfaces.txt. The sensor supports only one data lane. -- 2.34.1
