Convert the Samsung S5K5BAF image sensor bindings to DT schema. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- .../bindings/media/i2c/samsung,s5k5baf.yaml | 101 ++++++++++++++++++ .../bindings/media/samsung-s5k5baf.txt | 58 ---------- 2 files changed, 101 insertions(+), 58 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml delete mode 100644 Documentation/devicetree/bindings/media/samsung-s5k5baf.txt diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml new file mode 100644 index 000000000000..c8f2955e0825 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/samsung,s5k5baf.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> + +properties: + compatible: + const: samsung,s5k5baf + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: mclk + + clock-frequency: + default: 24000000 + description: mclk clock frequency + + rstn-gpios: + maxItems: 1 + description: RSTN pin + + stbyn-gpios: + maxItems: 1 + description: STDBYN pin + + vdda-supply: + description: Analog power supply 2.8V (2.6V to 3.0V) + + vddio-supply: + description: I/O power supply 1.8V (1.65V to 1.95V) or 2.8V (2.5V to 3.1V) + + vddreg-supply: + description: + Regulator input power supply 1.8V (1.7V to 1.9V) or 2.8V (2.6V to 3.0) + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + items: + - const: 1 + +required: + - compatible + - clocks + - clock-names + - rstn-gpios + - stbyn-gpios + - vdda-supply + - vddio-supply + - vddreg-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@2d { + compatible = "samsung,s5k5baf"; + reg = <0x2d>; + clocks = <&camera 0>; + clock-names = "mclk"; + clock-frequency = <24000000>; + rstn-gpios = <&gpl2 1 GPIO_ACTIVE_LOW>; + stbyn-gpios = <&gpl2 0 GPIO_ACTIVE_LOW>; + vdda-supply = <&cam_io_en_reg>; + vddio-supply = <&vtcam_reg>; + vddreg-supply = <&vt_core_15v_reg>; + + port { + endpoint { + remote-endpoint = <&csis1_ep>; + data-lanes = <1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt b/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt deleted file mode 100644 index 1f51e0439c96..000000000000 --- a/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt +++ /dev/null @@ -1,58 +0,0 @@ -Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP --------------------------------------------------------------------- - -Required properties: - -- compatible : "samsung,s5k5baf"; -- reg : I2C slave address of the sensor; -- vdda-supply : analog power supply 2.8V (2.6V to 3.0V); -- vddreg-supply : regulator input power supply 1.8V (1.7V to 1.9V) - or 2.8V (2.6V to 3.0); -- vddio-supply : I/O power supply 1.8V (1.65V to 1.95V) - or 2.8V (2.5V to 3.1V); -- stbyn-gpios : GPIO connected to STDBYN pin; -- rstn-gpios : GPIO connected to RSTN pin; -- clocks : list of phandle and clock specifier pairs - according to common clock bindings for the - clocks described in clock-names; -- clock-names : should include "mclk" for the sensor's master clock; - -Optional properties: - -- clock-frequency : the frequency at which the "mclk" clock should be - configured to operate, in Hz; if this property is not - specified default 24 MHz value will be used. - -The device node should contain one 'port' child node with one child 'endpoint' -node, according to the bindings defined in Documentation/devicetree/bindings/ -media/video-interfaces.txt. The following are properties specific to those -nodes. - -endpoint node -------------- - -- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in - video-interfaces.txt. If present it should be <1> - the device - supports only one data lane without re-mapping. - -Example: - -s5k5bafx@2d { - compatible = "samsung,s5k5baf"; - reg = <0x2d>; - vdda-supply = <&cam_io_en_reg>; - vddreg-supply = <&vt_core_15v_reg>; - vddio-supply = <&vtcam_reg>; - stbyn-gpios = <&gpl2 0 1>; - rstn-gpios = <&gpl2 1 1>; - clock-names = "mclk"; - clocks = <&clock_cam 0>; - clock-frequency = <24000000>; - - port { - s5k5bafx_ep: endpoint { - remote-endpoint = <&csis1_ep>; - data-lanes = <1>; - }; - }; -}; -- 2.34.1
