It's fine for these properties to be absent, as the driver doesn't fail
without them and functions with settings inherited from the reset/previous
stage bootloader state.
Fixes: 6c463222a21d ("dt-bindings: power: supply: pm8941-coincell: Convert to DT schema format")
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
v1 -> v2:
- Describe the behaviour when the properties are absent
.../bindings/power/supply/qcom,pm8941-coincell.yaml | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml
index b7b58aed3f3c..1d2405bea109 100644
--- a/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml
+++ b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml
@@ -28,12 +28,18 @@ properties:
maxItems: 1
qcom,rset-ohms:
- description: resistance (in ohms) for current-limiting resistor
+ description: |
+ Resistance (in ohms) for current-limiting resistor. If unspecified,
+ inherit the previous configuration (e.g. from bootloader or hardware
+ default value).
enum: [ 800, 1200, 1700, 2100 ]
qcom,vset-millivolts:
$ref: /schemas/types.yaml#/definitions/uint32
- description: voltage (in millivolts) to apply for charging
+ description: |
+ Voltage (in millivolts) to apply for charging. If unspecified, inherit
+ the previous configuration (e.g. from bootloader or hardware default
+ value).
enum: [ 2500, 3000, 3100, 3200 ]
qcom,charger-disable:
@@ -43,8 +49,6 @@ properties:
required:
- compatible
- reg
- - qcom,rset-ohms
- - qcom,vset-millivolts
additionalProperties: false
--
2.39.1
