Re: [PATCH 2/2] arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio

[Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>]

On 13/02/2023 22:31, Andrew Halaney wrote:
> The property is named snps,reset-gpio. Update the name accordingly so
> the corresponding phy is reset.
> 
> Fixes: 8dd495d12374 ("arm64: dts: freescale: add support for i.MX8DXL EVK board")
> Signed-off-by: Andrew Halaney <ahalaney@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
> index 1bcf228a22b8..b6d7c2526131 100644
> --- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
> @@ -121,7 +121,7 @@ &eqos {
>  	phy-handle = <&ethphy0>;
>  	nvmem-cells = <&fec_mac1>;
>  	nvmem-cell-names = "mac-address";
> -	snps,reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
> +	snps,reset-gpio = <&pca6416_1 2 GPIO_ACTIVE_LOW>;

I don't think it's correct change. This property is deprecated. Also
uses old, deprecated suffix gpio.

Best regards,
Krzysztof