[PATCH v2 2/3] clk: aspeed: Add full configs for i3c clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The current ast2600 i3c clock definitions are top-level (rather than
based on their actual hw sources: either HCLK or APLL), and include a
couple of definitions for (non-existent) i3c6 and i3c7.

This change re-parents these to the main i3c clock, explicitly sourced
from the APLL rather than whatever G6_CLK_SELECTION5 was last set to. We
also remove the i3c6 and i3c7 definitions.

This change is a partial cherry-pick and rework of ed44b8cdfdb and
1a35eb926d7 from Aspeed's own tree, originally by Dylan Hung
<dylan_hung@xxxxxxxxxxxxxx>.

Signed-off-by: Jeremy Kerr <jk@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/clk/clk-ast2600.c                 | 38 ++++++++++++++++++-----
 include/dt-bindings/clock/ast2600-clock.h |  3 +-
 2 files changed, 31 insertions(+), 10 deletions(-)

diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c
index 1f08ff3c60fa..45549cb18107 100644
--- a/drivers/clk/clk-ast2600.c
+++ b/drivers/clk/clk-ast2600.c
@@ -4,6 +4,7 @@
 
 #define pr_fmt(fmt) "clk-ast2600: " fmt
 
+#include <linux/bitfield.h>
 #include <linux/mfd/syscon.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
@@ -32,6 +33,18 @@
 #define ASPEED_G6_CLK_SELECTION1	0x300
 #define ASPEED_G6_CLK_SELECTION2	0x304
 #define ASPEED_G6_CLK_SELECTION4	0x310
+#define ASPEED_G6_CLK_SELECTION5	0x314
+#define   I3C_CLK_SELECTION		BIT(31)
+#define     I3C_CLK_SELECT_HCLK		0
+#define     I3C_CLK_SELECT_APLL_DIV	1
+#define   APLL_DIV_SELECTION		GENMASK(30, 28)
+#define     APLL_DIV_2			0b001
+#define     APLL_DIV_3			0b010
+#define     APLL_DIV_4			0b011
+#define     APLL_DIV_5			0b100
+#define     APLL_DIV_6			0b101
+#define     APLL_DIV_7			0b110
+#define     APLL_DIV_8			0b111
 
 #define ASPEED_HPLL_PARAM		0x200
 #define ASPEED_APLL_PARAM		0x210
@@ -97,14 +110,13 @@ static const struct aspeed_gate_data aspeed_g6_gates[] = {
 	[ASPEED_CLK_GATE_LHCCLK]	= { 37, -1, "lhclk-gate",	"lhclk", 0 },	/* LPC master/LPC+ */
 	/* Reserved 38 RSA: no longer used */
 	/* Reserved 39 */
-	[ASPEED_CLK_GATE_I3C0CLK]	= { 40,  40, "i3c0clk-gate",	NULL,	 0 },	/* I3C0 */
-	[ASPEED_CLK_GATE_I3C1CLK]	= { 41,  41, "i3c1clk-gate",	NULL,	 0 },	/* I3C1 */
-	[ASPEED_CLK_GATE_I3C2CLK]	= { 42,  42, "i3c2clk-gate",	NULL,	 0 },	/* I3C2 */
-	[ASPEED_CLK_GATE_I3C3CLK]	= { 43,  43, "i3c3clk-gate",	NULL,	 0 },	/* I3C3 */
-	[ASPEED_CLK_GATE_I3C4CLK]	= { 44,  44, "i3c4clk-gate",	NULL,	 0 },	/* I3C4 */
-	[ASPEED_CLK_GATE_I3C5CLK]	= { 45,  45, "i3c5clk-gate",	NULL,	 0 },	/* I3C5 */
-	[ASPEED_CLK_GATE_I3C6CLK]	= { 46,  46, "i3c6clk-gate",	NULL,	 0 },	/* I3C6 */
-	[ASPEED_CLK_GATE_I3C7CLK]	= { 47,  47, "i3c7clk-gate",	NULL,	 0 },	/* I3C7 */
+	[ASPEED_CLK_GATE_I3C0CLK]	= { 40,  40, "i3c0clk-gate",	"i3cclk", 0 }, /* I3C0 */
+	[ASPEED_CLK_GATE_I3C1CLK]	= { 41,  41, "i3c1clk-gate",	"i3cclk", 0 }, /* I3C1 */
+	[ASPEED_CLK_GATE_I3C2CLK]	= { 42,  42, "i3c2clk-gate",	"i3cclk", 0 }, /* I3C2 */
+	[ASPEED_CLK_GATE_I3C3CLK]	= { 43,  43, "i3c3clk-gate",	"i3cclk", 0 }, /* I3C3 */
+	[ASPEED_CLK_GATE_I3C4CLK]	= { 44,  44, "i3c4clk-gate",	"i3cclk", 0 }, /* I3C4 */
+	[ASPEED_CLK_GATE_I3C5CLK]	= { 45,  45, "i3c5clk-gate",	"i3cclk", 0 }, /* I3C5 */
+	/* Reserved: 46 & 47 */
 	[ASPEED_CLK_GATE_UART1CLK]	= { 48,  -1, "uart1clk-gate",	"uart",	 0 },	/* UART1 */
 	[ASPEED_CLK_GATE_UART2CLK]	= { 49,  -1, "uart2clk-gate",	"uart",	 0 },	/* UART2 */
 	[ASPEED_CLK_GATE_UART3CLK]	= { 50,  -1, "uart3clk-gate",	"uart",  0 },	/* UART3 */
@@ -775,6 +787,16 @@ static void __init aspeed_g6_cc(struct regmap *map)
 	/* USB 2.0 port1 phy 40MHz clock */
 	hw = clk_hw_register_fixed_rate(NULL, "usb-phy-40m", NULL, 0, 40000000);
 	aspeed_g6_clk_data->hws[ASPEED_CLK_USBPHY_40M] = hw;
+
+	/* i3c clock: source from apll, divide by 8 */
+	regmap_read(map, ASPEED_G6_CLK_SELECTION5, &val);
+	val &= ~(I3C_CLK_SELECTION | APLL_DIV_SELECTION);
+	val |= FIELD_PREP(I3C_CLK_SELECTION, I3C_CLK_SELECT_APLL_DIV);
+	val |= FIELD_PREP(APLL_DIV_SELECTION, APLL_DIV_8);
+	regmap_write(map, ASPEED_G6_CLK_SELECTION5, val);
+
+	hw = clk_hw_register_fixed_factor(NULL, "i3cclk", "apll", 0, 1, 8);
+	aspeed_g6_clk_data->hws[ASPEED_CLK_I3C] = hw;
 };
 
 static void __init aspeed_g6_cc_init(struct device_node *np)
diff --git a/include/dt-bindings/clock/ast2600-clock.h b/include/dt-bindings/clock/ast2600-clock.h
index d8b0db2f7a7d..600549d7bee8 100644
--- a/include/dt-bindings/clock/ast2600-clock.h
+++ b/include/dt-bindings/clock/ast2600-clock.h
@@ -57,8 +57,6 @@
 #define ASPEED_CLK_GATE_I3C3CLK		40
 #define ASPEED_CLK_GATE_I3C4CLK		41
 #define ASPEED_CLK_GATE_I3C5CLK		42
-#define ASPEED_CLK_GATE_I3C6CLK		43
-#define ASPEED_CLK_GATE_I3C7CLK		44
 
 #define ASPEED_CLK_GATE_FSICLK		45
 
@@ -87,6 +85,7 @@
 #define ASPEED_CLK_MAC2RCLK		68
 #define ASPEED_CLK_MAC3RCLK		69
 #define ASPEED_CLK_MAC4RCLK		70
+#define ASPEED_CLK_I3C			74
 
 /* Only list resets here that are not part of a gate */
 #define ASPEED_RESET_ADC		55
-- 
2.39.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux