Re: [PATCH v5 0/4] Add WCN6855 Bluetooth support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Feb 08, 2023 at 08:09:12PM -0600, Steev Klimaszewski wrote:
> First things first, I do not have access to the specs nor the schematics, so a
> lot of this was done via guess work, looking at the acpi tables, and looking at
> how a similar device (wcn6750) was added.
> 
> The 5th revision addresses comments from Luiz about the Bluetooth driver, as
> well as Konrad's comments on the dts file.
> 
> The end result is that we do have a working device, but not entirely reliable.
> 

Except for the one warning/error about frame assembly I've not seen any
reliability issues with this series.

> Hopefully by getting this out there, people who do have access to the specs or
> schematics can see where the improvements or fixes need to come.
> 
> There are a few things that I am not sure why they happen, and don't have the
> knowledge level to figure out why they happen or debugging it.
> 
> Bluetooth: hci0: setting up wcn6855
> Bluetooth: hci0: Frame reassembly failed (-84)
> Bluetooth: hci0: QCA Product ID   :0x00000013
> Bluetooth: hci0: QCA SOC Version  :0x400c0210
> Bluetooth: hci0: QCA ROM Version  :0x00000201
> Bluetooth: hci0: QCA Patch Version:0x000038e6
> Bluetooth: hci0: QCA controller version 0x02100201
> Bluetooth: hci0: QCA Downloading qca/hpbtfw21.tlv
> Bluetooth: hci0: QCA Downloading qca/hpnv21.bin
> Bluetooth: hci0: QCA setup on UART is completed
> 
> I do not know why the Frame assembly failed, and modprobe -r hci_uart and then
> modprobe hci_uart does not show the same Frame assembly failed.
> 
> The BD Address also seems to be incorrect, and I'm not sure what is going on
> there either.
> 

Changing the public-addr after the fact works...

> Testing was done by connecting a Razer Orochi bluetooth mouse, and using it, as
> well as connecting to and using an H2GO bluetooth speaker and playing audio out
> via canberra-gtk-play as well as a couple of YouTube videos in a browser.
> 
> The mouse only seems to work when < 2 ft. from the laptop, and for the speaker, only
> "A2DP Sink, codec SBC" would provide audio output, and while I could see that
> data was being sent to the speaker, it wasn't always outputting, and going >
> 4ft. away, would often disconnect.
> 

With the interference from WiFi removed I have very positive results
with this, been listening to music using this for a week now without any
concerns.

Tested-by: Bjorn Andersson <andersson@xxxxxxxxxx>

Regards,
Bjorn

> steev@wintermute:~$ hciconfig -a
> hci0:   Type: Primary  Bus: UART
>         BD Address: 00:00:00:00:5A:AD  ACL MTU: 1024:8  SCO MTU: 240:4
>         UP RUNNING PSCAN
>         RX bytes:1492 acl:0 sco:0 events:126 errors:0
>         TX bytes:128743 acl:0 sco:0 commands:597 errors:0
>         Features: 0xff 0xfe 0x8f 0xfe 0xd8 0x3f 0x5b 0x87
>         Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
>         Link policy: RSWITCH HOLD SNIFF
>         Link mode: PERIPHERAL ACCEPT
>         Name: 'wintermute'
>         Class: 0x0c010c
>         Service Classes: Rendering, Capturing
>         Device Class: Computer, Laptop
>         HCI Version:  (0xc)  Revision: 0x0
>         LMP Version:  (0xc)  Subversion: 0x46f7
>         Manufacturer: Qualcomm (29)
> 
> steev@wintermute:~$ dmesg | grep Razer
> [ 3089.235440] input: Razer Orochi as /devices/virtual/misc/uhid/0005:1532:0056.0003/input/input11
> [ 3089.238580] hid-generic 0005:1532:0056.0003: input,hidraw2: BLUETOOTH HID v0.01 Mouse [Razer Orochi] on 00:00:00:00:5a:ad
> steev@wintermute:~$ dmesg | grep H2GO
> [ 3140.959947] input: H2GO Speaker (AVRCP) as /devices/virtual/input/input12
> 
> Bjorn Andersson (1):
>   arm64: dts: qcom: sc8280xp: Define uart2
> 
> Steev Klimaszewski (3):
>   dt-bindings: net: Add WCN6855 Bluetooth
>   Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6855
>   arm64: dts: qcom: thinkpad-x13s: Add bluetooth
> 
>  .../net/bluetooth/qualcomm-bluetooth.yaml     | 17 +++++
>  .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 76 +++++++++++++++++++
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi        | 14 ++++
>  drivers/bluetooth/btqca.c                     |  9 ++-
>  drivers/bluetooth/btqca.h                     | 10 +++
>  drivers/bluetooth/hci_qca.c                   | 50 +++++++++---
>  6 files changed, 163 insertions(+), 13 deletions(-)
> 
> 
> base-commit: 4fafd96910add124586b549ad005dcd179de8a18
> -- 
> 2.39.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux