On 10/02/23 19:28, Rob Herring wrote: > > On Fri, 10 Feb 2023 17:19:56 +0530, MD Danish Anwar wrote: >> From: Puranjay Mohan <p-mohan@xxxxxx> >> >> Add a YAML binding document for the ICSSG Programmable real time unit >> based Ethernet hardware. The ICSSG driver uses the PRU and PRUSS consumer >> APIs to interface the PRUs and load/run the firmware for supporting >> ethernet functionality. >> >> Signed-off-by: Puranjay Mohan <p-mohan@xxxxxx> >> Signed-off-by: Md Danish Anwar <danishanwar@xxxxxx> >> --- >> .../bindings/net/ti,icssg-prueth.yaml | 184 ++++++++++++++++++ >> 1 file changed, 184 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml >> > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > ./Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/remoteproc/ti,pru-consumer.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/ti,icssg-prueth.example.dtb: ethernet: False schema does not allow {'compatible': ['ti,am654-icssg-prueth'], 'pinctrl-names': ['default'], 'pinctrl-0': [[4294967295]], 'ti,sram': [[4294967295]], 'ti,prus': [[4294967295, 4294967295, 4294967295, 4294967295, 4294967295, 4294967295]], 'firmware-name': ['ti-pruss/am65x-pru0-prueth-fw.elf', 'ti-pruss/am65x-rtu0-prueth-fw.elf', 'ti-pruss/am65x-txpru0-prueth-fw.elf', 'ti-pruss/am65x-pru1-prueth-fw.elf', 'ti-pruss/am65x-rtu1-prueth-fw.elf', 'ti-pruss/am65x-txpru1-prueth-fw.elf'], 'ti,pruss-gp-mux-sel': [[2, 2, 2, 2, 2, 2]], 'dmas': [[4294967295, 49920], [4294967295, 49921], [4294967295, 49922], [4294967295, 49923], [4294967295, 49924], [4294967295, 49925], [4294967295, 49926], [4294967295, 49927], [4294967295, 17152], [4294967295, 17153]], 'dma-names': ['tx0-0', 'tx0-1', 'tx0-2', 'tx0-3', 'tx1-0', 'tx1-1', 'tx1-2', 'tx1-3', 'rx0', 'rx1'], 'ti,mii-g-rt': [[429! > 4967295]], 'interrupts': [[24, 0, 2], [25, 1, 3]], 'interrupt-names': ['tx_ts0', 'tx_ts1'], 'ethernet-ports': {'#address-cells': [[1]], '#size-cells': [[0]], 'port@0': {'reg': [[0]], 'phy-handle': [[4294967295]], 'phy-mode': ['rgmii-id'], 'interrupts-extended': [[4294967295, 24]], 'ti,syscon-rgmii-delay': [[4294967295, 16672]], 'local-mac-address': [[0, 0, 0, 0, 0, 0]]}, 'port@1': {'reg': [[1]], 'phy-handle': [[4294967295]], 'phy-mode': ['rgmii-id'], 'interrupts-extended': [[4294967295, 25]], 'ti,syscon-rgmii-delay': [[4294967295, 16676]], 'local-mac-address': [[0, 0, 0, 0, 0, 0]]}}, '$nodename': ['ethernet']} > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/ti,icssg-prueth.example.dtb: ethernet: Unevaluated properties are not allowed ('firmware-name', 'ti,prus', 'ti,pruss-gp-mux-sel' were unexpected) > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml > > doc reference errors (make refcheckdocs): > > See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230210114957.2667963-2-danishanwar@xxxxxx Hi Rob, This patch depends on the patch [1] which is posted through series [2]. Patch [1] is currently approved, reviewed and will soon be merged to mainline Linux. Once it is merged this patch won't throw the above error. In the meantime I have posted this patch to get it reviewed so that once patch [1] gets merged, this will be ready to be merged. [1] https://lore.kernel.org/all/20230106121046.886863-2-danishanwar@xxxxxx/ [2] https://lore.kernel.org/all/20230106121046.886863-1-danishanwar@xxxxxx/ > > The base for the series is generally the latest rc1. A different dependency > should be noted in *this* patch. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit after running the above command yourself. Note > that DT_SCHEMA_FILES can be set to your schema file to speed up checking > your schema. However, it must be unset to test all examples with your schema. > -- Thanks and Regards, Danish.
