Re: [PATCH v2 0/5] arm64: dts: qcom: add DP Controller to SM8350 & SM8450 DTS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/02/2023 12:34, Neil Armstrong wrote:
Switch the QMP PHY to the newly documented USB3/DP Combo PHY
bindings at [1] and add the DP controller nodes.

The DP output is shared with the USB3 SuperSpeed lanes and is
usually connected to an USB-C port which Altmode is controlled
by the PMIC Glink infrastructure in discution at [2] & [3].

DT changes tying the DP controller to the USB-C port on the HDK
boards will be sent later.

Bindings dependencies at [1]

[1] https://lore.kernel.org/all/20230206-topic-sm8350-upstream-usb-dp-combo-phy-v1-1-ed849ae6b849@xxxxxxxxxx/
[2] https://lore.kernel.org/all/20230201041853.1934355-1-quic_bjorande@xxxxxxxxxxx/
[3] https://lore.kernel.org/all/20230130-topic-sm8450-upstream-pmic-glink-v1-0-0b0acfad301e@xxxxxxxxxx/

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>

Tested-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> #SM8350-HDK

--
With best wishes
Dmitry




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux