This patch adds the dt nodes for the extra usb2 picophys found on the stih410.
These two picophys are used in conjunction with the extra ehci/ohci usb
controllers also found on the stih410.
Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
---
arch/arm/boot/dts/stih410.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index c05627e..5ade3ed 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -10,5 +10,29 @@
#include "stih407-family.dtsi"
#include "stih410-pinctrl.dtsi"
/ {
+ soc {
+ usb2_picophy0: usbpicophy@0 {
+ compatible = "st,stih407-usb2-phy";
+ reg = <0xf8 0x04>, /* syscfg 5062 */
+ <0xf4 0x04>; /* syscfg 5061 */
+ reg-names = "param", "ctrl";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY0_RESET>;
+ reset-names = "global", "port";
+ };
+ usb2_picophy1: usbpicophy@1 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ reg = <0xfc 0x04>, /* syscfg 5063 */
+ <0xf4 0x04>; /* syscfg 5061 */
+ reg-names = "param", "ctrl";
+ st,syscfg = <&syscfg_core>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY1_RESET>;
+ reset-names = "global", "port";
+ };
+ };
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
