[PATCH v2 3/3] arm64: dts: qcom: sdm845-oneplus: add tri-state-key

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The tri-state-key is a sound profile switch found on the OnePlus 6,
Android maps the states to "mute", "vibrate" and "ring". Expose them as
ABS_SND_PROFILE events.
The previous GPIO numbers were wrong. Update them to the correct
ones.

Co-developed-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
Signed-off-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
Signed-off-by: Gergo Koteles <soyer@xxxxxx>
---
 .../boot/dts/qcom/sdm845-oneplus-common.dtsi  | 39 ++++++++++++++++++-
 1 file changed, 38 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 64638ea94db7..e45d4fdead82 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -52,6 +52,43 @@ key-vol-up {
 		};
 	};
 
+	tri-state-key {
+		compatible = "gpio-keys";
+		label = "Tri-state key";
+		pinctrl-names = "default";
+		pinctrl-0 = <&tri_state_key_default>;
+		state-top {
+			label = "Tri-state key top";
+			linux,input-type = <EV_ABS>;
+			linux,code = <ABS_SND_PROFILE>;
+			linux,input-value = <0>;
+			gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
+			debounce-interval = <50>;
+			linux,can-disable;
+		};
+
+		state-middle {
+			label = "Tri-state key middle";
+			linux,input-type = <EV_ABS>;
+			linux,code = <ABS_SND_PROFILE>;
+			linux,input-value = <1>;
+			gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+			debounce-interval = <50>;
+			linux,can-disable;
+
+		};
+
+		state-bottom {
+			label = "Tri-state key bottom";
+			linux,input-type = <EV_ABS>;
+			linux,code = <ABS_SND_PROFILE>;
+			linux,input-value = <2>;
+			gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+			debounce-interval = <50>;
+			linux,can-disable;
+		};
+	};
+
 	reserved-memory {
 		/*
 		 * The rmtfs_mem needs to be guarded due to "XPU limitations"
@@ -754,7 +791,7 @@ &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
 	tri_state_key_default: tri-state-key-default-state {
-		pins = "gpio40", "gpio42", "gpio26";
+		pins = "gpio126", "gpio52", "gpio24";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-- 
2.39.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux