The usage of edge-triggered interrupts lead to lost interrupts under load, see [0]. This was confirmed to be fixed by using level-triggered interrupts. The report was about SDIO. However, as the host controller is the same for SD and MMC, apply the change to all mmc controller instances. [0] https://www.spinics.net/lists/linux-mmc/msg73991.html Fixes: 4759fd87b928 ("arm64: dts: meson: g12a: add mmc nodes") Tested-by: FUKAUMI Naoki <naoki@xxxxxxxxx> Tested-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> Tested-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx> --- arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 585dd70f6..767412d3a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -2324,7 +2324,7 @@ uart_A: serial@24000 { sd_emmc_a: sd@ffe03000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0xffe03000 0x0 0x800>; - interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_A>, <&clkc CLKID_SD_EMMC_A_CLK0>, @@ -2336,7 +2336,7 @@ sd_emmc_a: sd@ffe03000 { sd_emmc_b: sd@ffe05000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0xffe05000 0x0 0x800>; - interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_B>, <&clkc CLKID_SD_EMMC_B_CLK0>, @@ -2348,7 +2348,7 @@ sd_emmc_b: sd@ffe05000 { sd_emmc_c: mmc@ffe07000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0xffe07000 0x0 0x800>; - interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_C>, <&clkc CLKID_SD_EMMC_C_CLK0>, -- 2.39.1
