Re: [RFT PATCH 1/3] ARM: dts: exynos: add "gpios" suffix to wlf,ldo1ena on Midas

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Feb 08, 2023 at 06:26:32PM +0100, Krzysztof Kozlowski wrote:
> The GPIOs properties should end with "gpios" suffix and Linux gpiolib
> already handles both names, so switch to preferred one.
> 
> While touching the lines, replace open-coded GPIO_ACTIVE_HIGH flag.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

Tested-by: Henrik Grimler <henrik@xxxxxxxxxx>

Audio still works fine on i9300, and there are no new warnings/errors
in dmesg.

Best regards,
Henrik Grimler

> ---
>  arch/arm/boot/dts/exynos4412-midas.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
> index d5074fa57142..525f945c4b91 100644
> --- a/arch/arm/boot/dts/exynos4412-midas.dtsi
> +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
> @@ -653,8 +653,8 @@ wm1811: audio-codec@1a {
>  		CPVDD-supply = <&vbatt_reg>;
>  		SPKVDD1-supply = <&vbatt_reg>;
>  		SPKVDD2-supply = <&vbatt_reg>;
> -		wlf,ldo1ena = <&gpj0 4 0>;
> -		wlf,ldo2ena = <&gpj0 4 0>;
> +		wlf,ldo1ena-gpios = <&gpj0 4 GPIO_ACTIVE_HIGH>;
> +		wlf,ldo2ena-gpios = <&gpj0 4 GPIO_ACTIVE_HIGH>;
>  	};
>  };
>  
> -- 
> 2.34.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux