Convert the Wolfson WM1811/WM8994/WM8958 audio codecs bindings to DT schema. Changes against original binding: 1. Add missing LDO1VDD-supply and LDO2VDD-supply. 2. Use "gpios" suffix for wlf,ldo1ena and wlf,ldo2ena (Linux kernel's gpiolib already looks for both variants). 3. Do not require AVDD1-supply and DCVDD-supply, because at least on Arndale board with Exynos5250 these are being supplied by internal LDOs. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- Changes since v1: 1. Add LDO2VDD-supply. 2. Do not require AVDD1-supply on WM8994. 3. Move requiring of common supplies to top-level "required:". DTS is being corrected here: https://lore.kernel.org/linux-samsung-soc/20230208172634.404452-1-krzysztof.kozlowski@xxxxxxxxxx/T/#t --- .../devicetree/bindings/sound/wlf,wm8994.yaml | 194 ++++++++++++++++++ .../devicetree/bindings/sound/wm8994.txt | 112 ---------- 2 files changed, 194 insertions(+), 112 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8994.yaml delete mode 100644 Documentation/devicetree/bindings/sound/wm8994.txt diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8994.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8994.yaml new file mode 100644 index 000000000000..8f045de02850 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,wm8994.yaml @@ -0,0 +1,194 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8994.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wolfson WM1811/WM8994/WM8958 audio codecs + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> + - patches@xxxxxxxxxxxxxxxxxxxxx + +description: | + These devices support both I2C and SPI (configured with pin strapping on the + board). + + Pins on the device (for linking into audio routes): + IN1LN, IN1LP, IN2LN, IN2LP:VXRN, IN1RN, IN1RP, IN2RN, IN2RP:VXRP, SPKOUTLP, + SPKOUTLN, SPKOUTRP, SPKOUTRN, HPOUT1L, HPOUT1R, HPOUT2P, HPOUT2N, LINEOUT1P, + LINEOUT1N, LINEOUT2P, LINEOUT2N. + +properties: + compatible: + enum: + - wlf,wm1811 + - wlf,wm8994 + - wlf,wm8958 + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: MCLK1 + - const: MCLK2 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + description: + The first cell is the IRQ number. The second cell is the flags, encoded + as the trigger masks. + + AVDD1-supply: true + AVDD2-supply: true + CPVDD-supply: true + DBVDD-supply: true + DBVDD1-supply: true + DBVDD2-supply: true + DBVDD3-supply: true + DCVDD-supply: true + LDO1VDD-supply: true + LDO2VDD-supply: true + SPKVDD1-supply: true + SPKVDD2-supply: true + + '#sound-dai-cells': + const: 0 + + wlf,gpio-cfg: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 11 + description: + A list of GPIO configuration register values. If absent, no configuration + of these registers is performed. If any value is over 0xffff then the + register will be left as default. If present 11 values must be supplied. + + wlf,micbias-cfg: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 2 + description: + Two MICBIAS register values for WM1811 or WM8958. If absent the register + defaults will be used. + + wlf,ldo1ena-gpios: + maxItems: 1 + description: + Control of LDO1ENA input to device. + + wlf,ldo2ena-gpios: + maxItems: 1 + description: + Control of LDO2ENA input to device. + + wlf,lineout1-se: + type: boolean + description: + LINEOUT1 is in single ended mode. + + wlf,lineout2-se: + type: boolean + description: + INEOUT2 is in single ended mode. + + wlf,lineout1-feedback: + type: boolean + description: + LINEOUT1 has common mode feedback connected. + + wlf,lineout2-feedback: + type: boolean + description: + LINEOUT2 has common mode feedback connected. + + wlf,ldoena-always-driven: + type: boolean + description: + LDOENA is always driven. + + wlf,spkmode-pu: + type: boolean + description: + Enable the internal pull-up resistor on the SPKMODE pin. + + wlf,csnaddr-pd: + type: boolean + description: + Enable the internal pull-down resistor on the CS/ADDR pin. + +required: + - compatible + - reg + - AVDD2-supply + - CPVDD-supply + - SPKVDD1-supply + - SPKVDD2-supply + +allOf: + - $ref: dai-common.yaml# + - if: + properties: + compatible: + enum: + - wlf,wm1811 + - wlf,wm8958 + then: + properties: + DBVDD-supply: false + LDO2VDD-supply: false + required: + - DBVDD1-supply + - DBVDD2-supply + - DBVDD3-supply + else: + properties: + DBVDD1-supply: false + DBVDD2-supply: false + DBVDD3-supply: false + required: + - DBVDD-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@1a { + compatible = "wlf,wm1811"; + reg = <0x1a>; + clocks = <&i2s0 0>; + clock-names = "MCLK1"; + + AVDD2-supply = <&main_dc_reg>; + CPVDD-supply = <&main_dc_reg>; + DBVDD1-supply = <&main_dc_reg>; + DBVDD2-supply = <&main_dc_reg>; + DBVDD3-supply = <&main_dc_reg>; + LDO1VDD-supply = <&main_dc_reg>; + SPKVDD1-supply = <&main_dc_reg>; + SPKVDD2-supply = <&main_dc_reg>; + + wlf,ldo1ena-gpios = <&gpb0 0 GPIO_ACTIVE_HIGH>; + wlf,ldo2ena-gpios = <&gpb0 1 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt deleted file mode 100644 index 8fa947509c10..000000000000 --- a/Documentation/devicetree/bindings/sound/wm8994.txt +++ /dev/null @@ -1,112 +0,0 @@ -WM1811/WM8994/WM8958 audio CODEC - -These devices support both I2C and SPI (configured with pin strapping -on the board). - -Required properties: - - - compatible : One of "wlf,wm1811", "wlf,wm8994" or "wlf,wm8958". - - - reg : the I2C address of the device for I2C, the chip select - number for SPI. - - - gpio-controller : Indicates this device is a GPIO controller. - - #gpio-cells : Must be 2. The first cell is the pin number and the - second cell is used to specify optional parameters (currently unused). - - - power supplies for the device, as covered in - Documentation/devicetree/bindings/regulator/regulator.txt, depending - on compatible: - - for wlf,wm1811 and wlf,wm8958: - AVDD1-supply, AVDD2-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply, - DCVDD-supply, CPVDD-supply, SPKVDD1-supply, SPKVDD2-supply - - for wlf,wm8994: - AVDD1-supply, AVDD2-supply, DBVDD-supply, DCVDD-supply, CPVDD-supply, - SPKVDD1-supply, SPKVDD2-supply - -Optional properties: - - - interrupts : The interrupt line the IRQ signal for the device is - connected to. This is optional, if it is not connected then none - of the interrupt related properties should be specified. - - interrupt-controller : These devices contain interrupt controllers - and may provide interrupt services to other devices if they have an - interrupt line connected. - - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. - The first cell is the IRQ number. - The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - - - clocks : A list of up to two phandle and clock specifier pairs - - clock-names : A list of clock names sorted in the same order as clocks. - Valid clock names are "MCLK1" and "MCLK2". - - - wlf,gpio-cfg : A list of GPIO configuration register values. If absent, - no configuration of these registers is performed. If any value is - over 0xffff then the register will be left as default. If present 11 - values must be supplied. - - - wlf,micbias-cfg : Two MICBIAS register values for WM1811 or - WM8958. If absent the register defaults will be used. - - - wlf,ldo1ena : GPIO specifier for control of LDO1ENA input to device. - - wlf,ldo2ena : GPIO specifier for control of LDO2ENA input to device. - - - wlf,lineout1-se : If present LINEOUT1 is in single ended mode. - - wlf,lineout2-se : If present LINEOUT2 is in single ended mode. - - - wlf,lineout1-feedback : If present LINEOUT1 has common mode feedback - connected. - - wlf,lineout2-feedback : If present LINEOUT2 has common mode feedback - connected. - - - wlf,ldoena-always-driven : If present LDOENA is always driven. - - - wlf,spkmode-pu : If present enable the internal pull-up resistor on - the SPKMODE pin. - - - wlf,csnaddr-pd : If present enable the internal pull-down resistor on - the CS/ADDR pin. - -Pins on the device (for linking into audio routes): - - * IN1LN - * IN1LP - * IN2LN - * IN2LP:VXRN - * IN1RN - * IN1RP - * IN2RN - * IN2RP:VXRP - * SPKOUTLP - * SPKOUTLN - * SPKOUTRP - * SPKOUTRN - * HPOUT1L - * HPOUT1R - * HPOUT2P - * HPOUT2N - * LINEOUT1P - * LINEOUT1N - * LINEOUT2P - * LINEOUT2N - -Example: - -wm8994: codec@1a { - compatible = "wlf,wm8994"; - reg = <0x1a>; - - gpio-controller; - #gpio-cells = <2>; - - lineout1-se; - - AVDD1-supply = <®ulator>; - AVDD2-supply = <®ulator>; - CPVDD-supply = <®ulator>; - DBVDD-supply = <®ulator>; - DCVDD-supply = <®ulator>; - SPKVDD1-supply = <®ulator>; - SPKVDD2-supply = <®ulator>; -}; -- 2.34.1