The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for PCIE g4x2. Add the new qserdes TX RX PCIE specific offsets in a dedicated header file. Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> --- The v8 of this patch is: https://lore.kernel.org/all/20230206212619.3218741-7-abel.vesa@xxxxxxxxxx/ Changes since v8: * none Changes since v7: * none Changes since v6: * none Changes since v5: * none Changes since v4: * none Changes since v3: * added Dmitry's R-b tag Changes since v2: * none Changes since v1: * split all the offsets into separate patches, like Vinod suggested .../phy-qcom-qmp-qserdes-txrx-v6_20.h | 45 +++++++++++++++++++ drivers/phy/qualcomm/phy-qcom-qmp.h | 1 + 2 files changed, 46 insertions(+) create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h new file mode 100644 index 000000000000..5385a8b60970 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h @@ -0,0 +1,45 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef QCOM_PHY_QMP_QSERDES_TXRX_PCIE_V6_20_H_ +#define QCOM_PHY_QMP_QSERDES_TXRX_PCIE_V6_20_H_ + +#define QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_TX 0x30 +#define QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_RX 0x34 +#define QSERDES_V6_20_TX_TRAN_DRVR_EMP_EN 0xac +#define QSERDES_V6_20_TX_LANE_MODE_1 0x78 +#define QSERDES_V6_20_TX_LANE_MODE_2 0x7c +#define QSERDES_V6_20_TX_LANE_MODE_3 0x80 + +#define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_2 0x08 +#define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_3 0x0c +#define QSERDES_V6_20_RX_UCDR_PI_CONTROLS 0x20 +#define QSERDES_V6_20_RX_UCDR_SO_ACC_DEFAULT_VAL_RATE3 0x34 +#define QSERDES_V6_20_RX_IVCM_CAL_CTRL2 0x9c +#define QSERDES_V6_20_RX_IVCM_POSTCAL_OFFSET 0xa0 +#define QSERDES_V6_20_RX_DFE_3 0xb4 +#define QSERDES_V6_20_RX_VGA_CAL_MAN_VAL 0xe8 +#define QSERDES_V6_20_RX_GM_CAL 0x10c +#define QSERDES_V6_20_RX_EQU_ADAPTOR_CNTRL4 0x120 +#define QSERDES_V6_20_RX_SIGDET_ENABLES 0x148 +#define QSERDES_V6_20_RX_PHPRE_CTRL 0x188 +#define QSERDES_V6_20_RX_DFE_CTLE_POST_CAL_OFFSET 0x194 +#define QSERDES_V6_20_RX_Q_PI_INTRINSIC_BIAS_RATE32 0x1dc +#define QSERDES_V6_20_RX_MODE_RATE2_B0 0x1f4 +#define QSERDES_V6_20_RX_MODE_RATE2_B1 0x1f8 +#define QSERDES_V6_20_RX_MODE_RATE2_B2 0x1fc +#define QSERDES_V6_20_RX_MODE_RATE2_B3 0x200 +#define QSERDES_V6_20_RX_MODE_RATE2_B4 0x204 +#define QSERDES_V6_20_RX_MODE_RATE2_B5 0x208 +#define QSERDES_V6_20_RX_MODE_RATE2_B6 0x20c +#define QSERDES_V6_20_RX_MODE_RATE3_B0 0x210 +#define QSERDES_V6_20_RX_MODE_RATE3_B1 0x214 +#define QSERDES_V6_20_RX_MODE_RATE3_B2 0x218 +#define QSERDES_V6_20_RX_MODE_RATE3_B3 0x21c +#define QSERDES_V6_20_RX_MODE_RATE3_B4 0x220 +#define QSERDES_V6_20_RX_MODE_RATE3_B5 0x224 +#define QSERDES_V6_20_RX_MODE_RATE3_B6 0x228 + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index 760de4c76e5b..e5974e6caf51 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -23,6 +23,7 @@ #include "phy-qcom-qmp-qserdes-com-v6.h" #include "phy-qcom-qmp-qserdes-txrx-v6.h" +#include "phy-qcom-qmp-qserdes-txrx-v6_20.h" #include "phy-qcom-qmp-qserdes-pll.h" -- 2.34.1
