On 07.02.2023 13:06, Durai Manickam KR wrote: > This series of patches is meant to address the following: > - Moving of flexcom definitions from board file to SoC file and > some minor changes to its properties. > - Add support for the new sam9x60 curiosity board based on the > existing sam9x60 SoC. > [ ... ] > > Durai Manickam KR (3): > ARM: dts: at91: sam9x60: fix spi4 node > dt-bindings: arm: at91: Add info on sam9x60 curiosity > ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60 > curiosity board > > Manikandan Muralidharan (5): > ARM: dts: at91: sam9x60: Fix the label numbering for the flexcom > functions > ARM: dts: at91: sam9x60: move flexcom definitions > ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART > ARM: dts: at91: sam9x60: Add DMA bindings for the flexcom nodes > ARM: dts: at91: sam9x60: Add missing flexcom definitions > > .../devicetree/bindings/arm/atmel-at91.yaml | 6 +- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/at91-sam9x60_curiosity.dts | 503 ++++++++++++++ > arch/arm/boot/dts/at91-sam9x60ek.dts | 50 +- > arch/arm/boot/dts/sam9x60.dtsi | 622 ++++++++++++++++++ > 5 files changed, 1140 insertions(+), 42 deletions(-) > create mode 100644 arch/arm/boot/dts/at91-sam9x60_curiosity.dts > Applied to at91-dt, thanks!
