On Wed, Nov 12, 2014 at 04:51:16PM +0100, Stefan Agner wrote:
> >> diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
> >> index 2371760..79ccfe2 100644
> >> --- a/arch/arm/boot/dts/vf-colibri.dtsi
> >> +++ b/arch/arm/boot/dts/vf-colibri.dtsi
> >> @@ -163,5 +163,17 @@
> >> VF610_PAD_PTD3__UART2_CTS 0x21a1
> >> >;
> >> };
> >> +
> >> + pinctrl_usbh1_ext: gpio_usb_vbus {
> >> + fsl,pins = <
> >> + VF610_PAD_PTD4__GPIO_83 0x22ed
> >
> > We used to know the GPIO usage by looking for the phandle reference to
> > the node. But it doesn't work for VF610 case now.
> >
> > I guess this is for usbh_vbus_reg usage? It would be nice to have a
> > comment telling the usage of the GPIO.
>
> Yeah its true, its assign is not required for Vybird. However, we could
> assign them anyway, it would even enforce correct pin setup from
> Startup... This would then make a comment superfluous. What do you
> think?
I agree with the approach of assigning the phandle anyway.
>
>
> >
> >> + >;
> >> + };
> >> +
> >> + pinctrl_usbdev0_ext: gpio_usb_cdet {
> >> + fsl,pins = <
> >> + VF610_PAD_PTC29__GPIO_102 0x22ed
> >
> > How is this one used?
>
> This is not yet used. It is more or less the OTG-ID pin, but on 3.3V
> level. We use that on the Colibri standard to switch between Host/Device
> mode, however a driver which uses that GPIO is still outstanding. I can
> also leave that away for now, if you prefer....
Then let's add it when it's actually required.
Shawn
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
