Re: [PATCH 2/7] arm64: dts: qcom: sc7280: Add 3ms ramp to herobrine's pp3300_left_in_mlb

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Feb 06, 2023 at 06:48:11PM -0800, Douglas Anderson wrote:
> The "pp3300_left_in_mlb" rail on herobrine eventually connects up to
> "vreg_edp_3p3" on the qcard. On several herobrine designs this rail
> has been measured to need more than 1ms to turn on.
> 
> While technically a herobrine derivative (defined as anyone including
> the "herobrine.dtsi") could change the board to make the rail rise
> faster or slower, the fact that two boards (evoker and villager) both
> measured it as taking more than 1ms implies that it's probably going
> to be the norm. Thus, let's add a "regulator-enable-ramp-delay"
> straight into the herobrine.dtsi to handle this. If a particular
> derivative board needs a faster or slower one then they can override
> it, though that feels unlikely.
> 
> While we measured something a bit over 1ms, we'll choose 3ms to give
> us a tiny bit of margin. This isn't a rail that turns off and on all
> the time anyway and 3ms is nothing compared to the total amount of
> time to power on a panel.
> 
> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>

Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux