Add the PMIC eUSB2 repeater node and add the usb-repeater property to the eUSB2 PHY to allow it to be controlled by the PHY driver. Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx> --- The v3 (rfc) is here: https://lore.kernel.org/all/20230202133816.4026990-8-abel.vesa@xxxxxxxxxx/ Changes since v3: * Dropped the phy-names property from usb_1_hsphy, like Dmitry suggested arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index 56aab7cafcbc..6b6ec0fe5e5e 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -457,6 +457,11 @@ sdc2_card_det_n: sdc2-card-det-state { }; }; +&pm8550b_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + &qupv3_id_0 { status = "okay"; }; @@ -563,6 +568,8 @@ &usb_1_hsphy { vdd-supply = <&vreg_l1e_0p88>; vdda12-supply = <&vreg_l3e_1p2>; + phys = <&pm8550b_eusb2_repeater>; + status = "okay"; }; -- 2.34.1