This add the necessary binding documentation for the power domain
found on Rockchip Socs.
Signed-off-by: Jack Dai <jack.dai@xxxxxxxxxxxxxx>
Signed-off-by: jinkun.hong <jinkun.hong@xxxxxxxxxxxxxx>
Signed-off-by: Caesar Wang <caesar.wang@xxxxxxxxxxxxxx>
---
Changes in v11: None
Changes in v10: None
Changes in v9:
- add document decription
Changes in v8:
- document go back to v2
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3:
- DT structure has changed
Changes in v2:
- move clocks to "optional"
.../bindings/arm/rockchip/power_domain.txt | 48 ++++++++++++++++++++++
1 file changed, 48 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/rockchip/power_domain.txt
diff --git a/Documentation/devicetree/bindings/arm/rockchip/power_domain.txt b/Documentation/devicetree/bindings/arm/rockchip/power_domain.txt
new file mode 100644
index 0000000..3e74e6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/rockchip/power_domain.txt
@@ -0,0 +1,48 @@
+* Rockchip Power Domains
+
+Rockchip processors include support for multiple power domains which can be
+powered up/down by software based on different application scenes to save power.
+
+Required properties for power domain controller:
+- compatible: should be one of the following.
+ * rockchip,rk3288-power-controller - for rk3288 type power domain.
+- #power-domain-cells: Number of cells in a power-domain specifier.
+ should be 1.
+- rockchip,pmu: phandle referencing a syscon providing the pmu registers
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+
+Required properties for power domain sub nodes:
+- reg: index of the power domain, should use macros in:
+ * include/dt-bindings/power-domain/rk3288.h - for rk3288 type power domain.
+- clocks (optional): phandles to clocks which need to be enabled while power domain
+ switches state.
+
+Example:
+
+ power: power-controller {
+ compatible = "rockchip,rk3288-power-controller";
+ #power-domain-cells = <1>;
+ rockchip,pmu = <&pmu>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pd_gpu {
+ reg = <RK3288_PD_GPU>;
+ clocks = <&cru ACLK_GPU>;
+ };
+ };
+
+Node of a device using power domains must have a power-domains property,
+containing a phandle to the power device node and an index specifying which
+power domain to use.
+The index should use macros in:
+ * include/dt-bindings/power-domain/rk3288.h - for rk3288 type power domain.
+
+Example of the node using power domain:
+
+ node {
+ /* ... */
+ power-domains = <&power RK3288_PD_GPU>;
+ /* ... */
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
