Re: [PATCH V3 5/9] clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks Dmirty for the review!


On 2/6/2023 3:26 PM, Dmitry Baryshkov wrote:
On 06/02/2023 09:12, Kathiravan T wrote:
> Add support for the global clock controller found on IPQ5332 SoC.
>
> Signed-off-by: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
> ---
> Changes in V3:
>     - As I mentined the bindings, changes need to be done in V2 got
>       missed out and same has been done in V3, to call out
>       specifically dropped the CLK_IS_CRITICAL and dropped the
>       gcc_apss_ahb_clk, its source clock and gcc_apss_axi_clk
>     - Used gcc_parent_data_xo wherever applicable and dropped the
>       duplicate entries
>     - dropped the unused parent_map_10 and parent_data_10
>     - Used qcom_cc_probe instead of qcom_cc_really_probe
> Changes in V2:
>     - Added the 'dependes on' for Kconfig symbol
>     - Dropped the CLK_IS_CRITICAL flag throughout the file
>     - Dropped the gcc_apss_ahb_clk and gcc_apss_axi_clk as these are
>       managed by bootloaders


[skipped]

> +static const struct freq_tbl ftbl_gcc_pcie_aux_clk_src[] = {
> +    F(2000000, P_XO, 12, 0, 0),
> +    { }
> +};
> +
> +static struct clk_rcg2 gcc_pcie_aux_clk_src = {
> +    .cmd_rcgr = 0x28004,
> +    .mnd_width = 16,
> +    .hid_width = 5,
> +    .parent_map = gcc_parent_map_6,
> +    .freq_tbl = ftbl_gcc_pcie_aux_clk_src,
> +    .clkr.hw.init = &(const struct clk_init_data){
> +        .name = "gcc_pcie_aux_clk_src",
> +        .parent_data = gcc_parent_data_6,
> +        .num_parents = ARRAY_SIZE(gcc_parent_data_6),
> +        .ops = &clk_rcg2_ops,
> +    },
> +};
> +
> +static struct clk_regmap_mux pcie3x2_pipe_clk_src = {
> +    .reg = 0x28064,
> +    .shift = 8,
> +    .width = 2,
> +    .parent_map = gcc_parent_map_14,
> +    .clkr = {
> +        .hw.init = &(struct clk_init_data){
> +            .name = "pcie3x2_phy_pipe_clk_src",
> +            .parent_data = gcc_parent_data_14,
> +            .num_parents = ARRAY_SIZE(gcc_parent_data_14),
> +            .ops = &clk_regmap_mux_closest_ops,

Should we use clk_regmap_phy_mux_ops here instead?


Sure, I will check this one. Also looking at the commit, 74e4190cdebe ("clk: qcom: regmap: add PHY clock source implementation"), looks like I can use the clk_regmap_phy_mux struct instead of clk_regmap_mux. I will check into this and update accordingly.



> +            .flags = CLK_SET_RATE_PARENT,
> +        },
> +    },
> +};
> +
> +static struct clk_regmap_mux pcie3x1_0_pipe_clk_src = {
> +    .reg = 0x29064,
> +    .shift = 8,
> +    .width = 2,
> +    .parent_map = gcc_parent_map_15,
> +    .clkr = {
> +        .hw.init = &(struct clk_init_data){
> +            .name = "pcie3x1_0_phy_pipe_clk_src",
> +            .parent_data = gcc_parent_data_15,
> +            .num_parents = ARRAY_SIZE(gcc_parent_data_15),
> +            .ops = &clk_regmap_mux_closest_ops,

And clk_regmap_phy_mux_ops here too?


Ack.



> +            .flags = CLK_SET_RATE_PARENT,
> +        },
> +    },
> +};
> +
> +static struct clk_regmap_mux pcie3x1_1_pipe_clk_src = {
> +    .reg = 0x2A064,
> +    .shift = 8,
> +    .width = 2,
> +    .parent_map = gcc_parent_map_16,
> +    .clkr = {
> +        .hw.init = &(struct clk_init_data){
> +            .name = "pcie3x1_1_phy_pipe_clk_src",
> +            .parent_data = gcc_parent_data_16,
> +            .num_parents = ARRAY_SIZE(gcc_parent_data_16),
> +            .ops = &clk_regmap_mux_closest_ops,

And here?


Ack.



> +            .flags = CLK_SET_RATE_PARENT,
> +        },
> +    },
> +};
> +

[skipped]


> +
> +static struct clk_branch gcc_pcie3x1_0_pipe_clk = {
> +    .halt_reg = 0x29068,
> +    .halt_check = BRANCH_HALT_DELAY,
> +    .clkr = {
> +        .enable_reg = 0x29068,
> +        .enable_mask = BIT(0),
> +        .hw.init = &(const struct clk_init_data){
> +            .name = "gcc_pcie3x1_0_pipe_clk",
> +            .parent_names = (const char *[]){
> +                "pcie3x1_0_pipe_clk_src"
> +            },

Nooo. No parent_names please. You have several of them in the driver


I missed this. I will fix in next spin.



> +            .num_parents = 1,
> +            .flags = CLK_SET_RATE_PARENT,
> +            .ops = &clk_branch2_ops,
> +        },
> +    },
> +};
> +




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux