[PATCH v5 0/8] Add SC7280 audioreach device tree nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add SC7280 audioreach device tree nodes and extract audio specific
dtsi nodes and add them in new file.

This patch series depends on:
    -- https://patchwork.kernel.org/project/linux-clk/list/?series=717985
Corresponding dt-bindings not mainlined yet.
    -- https://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux.git/commit/?h=rproc-next&id=8490a99586abd480d7139893f78c019790a58979

Changes Since v4:
    -- Modify lpasscc clock controller node name.
    -- Disable lpass_core node.
    -- Modify Model name in sound node in "Add sound node for crd-rev3 board" patch.
    -- Remove protection domain property in "Add LPASS PIL node".
Changes Since v3:
    -- Remove deleting digital codecs in crd-rev3 board specific dtsi and upadate them using phandle.
    -- Update commit message in "Update lpass_tlmm node" patch.
    -- Change the position of status property in LPASS PIL node.
    -- Update commit message in "Add sound node" patch.
Changes Since v2:
    -- Remove Patch related to Add CGCR reset property.
    -- Remove Patch related to Disable legacy path clock nodes.
    -- Add dt-bindings for missing properties.
    -- Change the order of nodes.
    -- Move digictal codec macro nodes to root node from soc node.
    -- Add adsp-pil-mode property in required clock nodes.
Changes Since v1:
    -- Move remoteproc node to soc dtsi file.
    -- Add qcom, adsp-pil-mode reg property in lpasscc node.
    -- Fix typo errors.
    -- Remove redundant status properties.

Srinivasa Rao Mandadapu (8):
  arm64: dts: qcom: sc7280: Extract audio nodes from common idp dtsi
    file
  arm64: dts: qcom: sc7280: Add sound node for crd-rev3 board
  arm64: dts: qcom: sc7280: Add LPASS PIL node
  arm64: dts: qcom: sc7280: Update VA/RX/TX macro clock nodes
  arm64: dts: qcom: sc7280: Update lpass_tlmm node
  arm64: dts: qcom: sc7280: Add qcom,adsp-pil-mode property in clock
    nodes
  arm64: dts: qcom: sc7280: Modify lpasscc node name
  dt-bindings: remoteproc: qcom: sc7280-adsp-pil: Add missing properties

 .../bindings/remoteproc/qcom,sc7280-adsp-pil.yaml  |  30 +++-
 arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi     | 135 ++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts         |  24 +--
 .../qcom/sc7280-herobrine-audioreach-wcd9385.dtsi  | 171 +++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi           | 126 ---------------
 arch/arm64/boot/dts/qcom/sc7280.dtsi               |  95 +++++++++++-
 6 files changed, 427 insertions(+), 154 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi

-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux