[PATCH] dt-bindings : misc : aspeed,cvic interrupt controller : convert the binding document to yaml

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



    Convert the binding document for ASPEED AST2400 and AST2500 coprocessor interrupt controller
    from txt to yaml so one could validate dt-entries correctly and any future additions can go
    into yaml format. The options for compatability described according to the example given.
---
 .../devicetree/bindings/misc/aspeed,cvic.txt  | 35 ----------
 .../devicetree/bindings/misc/aspeed,cvic.yaml | 67 +++++++++++++++++++
 2 files changed, 67 insertions(+), 35 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/misc/aspeed,cvic.txt
 create mode 100644 Documentation/devicetree/bindings/misc/aspeed,cvic.yaml

diff --git a/Documentation/devicetree/bindings/misc/aspeed,cvic.txt b/Documentation/devicetree/bindings/misc/aspeed,cvic.txt
deleted file mode 100644
index d62c783d1d5e..000000000000
--- a/Documentation/devicetree/bindings/misc/aspeed,cvic.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-* ASPEED AST2400 and AST2500 coprocessor interrupt controller
-
-This file describes the bindings for the interrupt controller present
-in the AST2400 and AST2500 BMC SoCs which provides interrupt to the
-ColdFire coprocessor.
-
-It is not a normal interrupt controller and it would be rather
-inconvenient to create an interrupt tree for it as it somewhat shares
-some of the same sources as the main ARM interrupt controller but with
-different numbers.
-
-The AST2500 supports a SW generated interrupt
-
-Required properties:
-- reg: address and length of the register for the device.
-- compatible: "aspeed,cvic" and one of:
-		"aspeed,ast2400-cvic"
-	      or
-		"aspeed,ast2500-cvic"
-
-- valid-sources: One cell, bitmap of supported sources for the implementation
-
-Optional properties;
-- copro-sw-interrupts: List of interrupt numbers that can be used as
-		       SW interrupts from the ARM to the coprocessor.
-		       (AST2500 only)
-
-Example:
-
-	cvic: copro-interrupt-controller@1e6c2000 {
-		compatible = "aspeed,ast2500-cvic";
-		valid-sources = <0xffffffff>;
-		copro-sw-interrupts = <1>;
-		reg = <0x1e6c2000 0x80>;
-	};
diff --git a/Documentation/devicetree/bindings/misc/aspeed,cvic.yaml b/Documentation/devicetree/bindings/misc/aspeed,cvic.yaml
new file mode 100644
index 000000000000..bbff0418fa2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/aspeed,cvic.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/aspeed,cvic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED AST2400 and AST2500 coprocessor interrupt controller
+
+maintainers: 
+  - Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
+  - Rob Herring <robh@xxxxxxxxxx>
+
+description: |
+  This file describes the bindings for the interrupt controller present
+  in the AST2400 and AST2500 BMC SoCs which provides interrupt to the
+  ColdFire coprocessor.
+
+  It is not a normal interrupt controller and it would be rather
+  inconvenient to create an interrupt tree for it as it somewhat shares
+  some of the same sources as the main ARM interrupt controller but with
+  different numbers.
+
+  The AST2500 supports a SW generated interruptThe Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block
+  which provides high-throughput LDPC and Turbo Code implementations.
+  The LDPC decode & encode functionality is capable of covering a range of
+  customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality
+  principally covers codes used by LTE. The FEC Engine offers significant
+  power and area savings versus implementations done in the FPGA fabric.
+
+properties:
+
+  compatible:
+    enum: 
+      - aspeed,ast2400-cvic
+      - aspeed,ast2500-cvic
+
+  reg:
+    maxItems: 1
+    description: address and length of the register for the device.
+  
+  valid-sources:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: One cell, bitmap of supported sources for the implementation
+
+  copro-sw-interrupts:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+                  List of interrupt numbers that can be used as
+                  SW interrupts from the ARM to the coprocessor.
+                  (AST2500 only)
+
+required:
+  - compatible
+  - reg
+  - valid-sources
+
+additionalProperties: false
+
+examples:
+  - |
+    cvic: copro-interrupt-controller@1e6c2000 
+    {
+        compatible = "aspeed,ast2500-cvic";
+        valid-sources = <0xffffffff>;
+        copro-sw-interrupts = <1>;
+        reg = <0x1e6c2000 0x80>;
+    };
-- 
2.37.1 (Apple Git-137.1)




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux