Switch the QMP PHY to the newly documented USB3/DP Combo PHY bindings at [1] and add the DP controller nodes. The DP output is shared with the USB3 SuperSpeed lanes and is usually connected to an USB-C port which Altmode is controlled by the PMIC Glink infrastructure in discution at [2] & [3]. DT changes tying the DP controller to the USB-C port on the HDK boards will be sent later. Bindings dependencies at [1] [1] https://lore.kernel.org/all/20230206-topic-sm8350-upstream-usb-dp-combo-phy-v1-1-ed849ae6b849@xxxxxxxxxx/ [2] https://lore.kernel.org/all/20230201041853.1934355-1-quic_bjorande@xxxxxxxxxxx/ [3] https://lore.kernel.org/all/20230130-topic-sm8450-upstream-pmic-glink-v1-0-0b0acfad301e@xxxxxxxxxx/ Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx> --- Neil Armstrong (5): dt-bindings: display: msm: dp-controller: document SM8450 compatible arm64: dts: qcom: sm8350: switch to combo usb3/dp phy arm64: dts: qcom: sm8350: add dp controller arm64: dst: qcom: sm8450: switch to usb3/dp combo phy arm64: dst: qcom: sm8450: add dp controller .../bindings/display/msm/dp-controller.yaml | 4 + arch/arm64/boot/dts/qcom/sm8350.dtsi | 117 +++++++++++++++----- arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 4 +- arch/arm64/boot/dts/qcom/sm8450.dtsi | 118 ++++++++++++++++----- 4 files changed, 190 insertions(+), 53 deletions(-) --- base-commit: ea4dabbb4ad7eb52632a2ca0b8f89f0ea7c55dcf change-id: 20230206-topic-sm8450-upstream-dp-controller-20054ab280de Best regards, -- Neil Armstrong <neil.armstrong@xxxxxxxxxx>
